On Tue, Jul 17, 2007 at 09:24:04AM +0300, Shadi Ammouri
wrote:
> Hi,
>
> I'm running NetBSD-current on an ARM based system.
>
> I have a problem after disconnecting a USB drive while
a write
> operation is active.
>
> I do the following:
> - mount the USB drive. (mount /dev/sd0c
/mnt/disk")
> - run dd to write some file to the disk. (dd
if=/dev/zero
> of=/mnt/disk/test_file")
> - disconnect the disk while the write operation is in
progress.
>
> >From that point, I cannot unmount the drive, or
remount it.
> I get the following error: "umount: /mnt/disk:
Input/output error".
Does umount -f work?
Dave
--
David Young OJC Technologies
dyoung ojctech.com Urbana, IL * (217) 278-3933 ext 24
|