Problem withe remote installation

Hi there,
I have the following problem. I hired a dedicated server
from a company 
that offers the service to install the system from a cd with
a remote 
control console. This worked fine with two servers in the
past. Now I 
tried to install netbsd 3.0 but the ethernetcard of the new
server 
differs and is not recognized by the standard kernel. There
is no way to 
put data to the systen via the remote console to install and
patch the 
kernel sources. So is there any chance to build a new kernel
and put it 
on a installation cd image? Or are there any other
possibilities. 

Thanks in advance

Arne


Here is the linux lspci output  maybe there are some usefull

informations about the ethernetcard.

0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown
device 0282
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown
device 1282
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown
device 2282
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown
device 3282
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown
device 4282
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown
device 7282
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI
bridge 
[K8T800 South]
0000:00:0d.0 Ethernet controller: Realtek Semiconductor Co.,
Ltd. 
RTL-8169 Gigabit Ethernet (rev 10)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA
VT6420 SATA 
RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev
06)
0000:00:10.0 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 
1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 
1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 
1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 
1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0
(rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA
bridge 
[K8T800 South]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:01:00.0 VGA compatible controller: Trident
Microsystems: Unknown 
device 2200 (rev 02)

Try a -current CD.   You can build a custom iso with
build.sh with
3.0 sources (I'd use netbsd-3 sources instead), but if it
doesn't work
with -current, making it work with 3.0 will be nontrivial.

-- 
    Greg Troxel <gdtir.bbn.com>