Hi,
netbsd/hpcmips 3.0.1 boots fine on a Fujitsu Pencentra 130,
although PS/2
keyboard isn't recognized. Henceforth, I will try again
with serial console.
I'm also trying to boot netbsd/hpcmips 3.0.1 on a Fujitsu
Pencentra 200. Is
this model supported or not ? (http://www.netbs
d.org/Ports/hpcmips/ doesn't
mention it although the TX3922 CPU is supported)
In brief, on Pencentra 200, this is what happens:
pbsdboot.exe (w/ menu pencentra 130 framebuffer) -- Error:
Mapping interrupt
vector failed. -- frozen
hpcboot.exe (w/ menu pencentra 200 framebuffer) -- Error: No
symbol and/or
string table in binary. (not fatal) -- OK -- Push yes to
boot / OK -- frozen
Any hints ?
I note there's a kernel *configuration* for TX3922 CPU
available in the
source.
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/hpcmips/
conf/TX3922?rev=1.76&content-type=text/x-cvsweb-markup
Is the relative installer missing ?
There's only netbsd.gz and netbsd-TX3912.gz
ftp://ftp.fr.netbsd.org/pub/NetBSD/NetBSD-3.0.1/hpcmips/inst
allation
Thanks
Pierre-Philipp Braun
|