Hello,
I've Compaq Aero 2130 and I'm trying to run netbsd under
it. I cannot
find correct framebuffer settings. I tried both psdboot and
hpcboot.
I connected it through a serial cable and it seems to fail
detecting my
CF storage card (Kingston 512MB, working on sharp 4600). I
see red N in
PCIC support but there must be any way. Do you have any
ideas?
I attach dmesg:
mem_cluster_cnt = 2
mem_clusters[0] = {0x0,0x7b9000}
mem_clusters[1] = {0x7b9000,0x1047000}
loading 0x7b9000,0x1047000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
NetBSD 2.1 (RAMDISK) #0: Mon Oct 24 21:41:36 UTC 2005
builds b2.netbsd.org:/home/builds/ab/netbsd-2-1-RELEASE/hpcm
ips/200510241747Z-obj/home/builds/ab/netbsd-2-1-RELEASE/src/
sys/arch/hpcmips/compile/RAMDISK
CASIO Cassiopeia E-55 (NEC VR4111 rev1.0 69.391MHz)
total memory = 24576 KB
avail memory = 15972 KB
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc52) Rev. 5.2 with
software emulated
floating point
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 32 TLB
entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
vr4102ip0 at mainbus0
vrbcu0 at vr4102ip0 addr 0x0b000000-001f
vrbcu0: CPU 69.391MHz, bus 23.130MHz, ram 23.130MHz
vrcmu0 at vr4102ip0 addr 0x0b000060-007f
vrgiu0 at vr4102ip0 addr 0x0b000100-011f
button0 at vrgiu0 port=6 id=8 active=low sense=edge
button1 at vrgiu0 port=7 id=9 active=low sense=edge
button2 at vrgiu0 port=8 id=16 active=low sense=edge
button3 at vrgiu0 port=9 id=17 active=low sense=edge
button4 at vrgiu0 port=10 id=18 active=low sense=edge
button5 at vrgiu0 port=11 id=19 active=low sense=edge
button6 at vrgiu0 port=12 id=11 active=low sense=edge
button7 at vrgiu0 port=13 id=10 active=low sense=edge
pwctl0 at vrgiu0 port=38 id=0 on=1
pwctl1 at vrgiu0 port=26 id=4 on=1
vrdmaau0 at vr4102ip0 addr 0x0b000020-0037
vrdcu0 at vr4102ip0 addr 0x0b000040-004b
com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working
fifo
com0: console
vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df
vrkiu0 at vr4102ip0 addr 0x0b000180-019f
hpckbd0 at vrkiu0: no keymap.
wskbd0 at hpckbd0 mux 1
vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf
vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7
vrled0 at vr4102ip0 addr 0x0b000240-024f
vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf
wsmouse0 at vrpiu0 mux 0
vraiu0 at vr4102ip0 addr 0x0b000160-017f
audio0 at vraiu0: half duplex
vrisab4 at vrgiu0: ISA port 0x1400c000-0x18000000 mem
0x10000000-0x14000000
isa4 at vrisab4
bivideo0 at mainbus0: pseudo video controller
bivideo0: framebuffer address: 0xaa000000
hpcfb0 at bivideo0
wsdisplay0 at hpcfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
md0: internal 4352 KB image area
boot device: <unknown>
root on md0a dumps on md0b
WARNING: preposterous clock chip time
-- CHECK AND RESET THE DATE!
root file system type: ffs
erase ^?, werase ^W, kill ^U, intr ^C
(B[H[J[?1h=[H[J
Welcome to sysinst, the NetBSD-2.1 system installation
tool. This
menu-driven tool is designed to help you install NetBSD to
a hard disk, or
upgrade an existing NetBSD system, with a minimum of work.
In the following menus type the reference letter (a, b, c,
...) to
select an
item, or type CTRL+N/CTRL+P to select the next/previous
item.
The arrow keys and Page-up/Page-down may also work.
Activate the current selection from the menu by typing the
enter key.
[13;17H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
(B[14;17H(0x(B>[7ma:
Installation messages in
English[14;63H[m(0x(B[15;17H(0x(B b:
Messages d'installation en Français
(0x(B[16;17H(0x(B c:
Installation auf Deutsch[16;63H(0x(B[17;17H(0x(B d:
Komunikaty
instalacyjne w jezyku polskim
(0x(B[18;17H(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqj(B[14;18H
a: Installation messages in English[15;18H>[7mb:
Messages
d'installation en Français[15;18H[m b: Messages
d'installation en
Français[16;18H>[7mc: Installation auf
Deutsch[16;18H[m c:
Installation auf Deutsch[17;18H>[7md: Komunikaty
instalacyjne w jezyku polskim[17;18H[m[A>[7mc:
Installation auf Deutsch[17;18H[m d: Komunikaty
instalacyjne
w jezyku polskim[16;18H[A>[7mb: Messages
d'installation en
Français[16;18H[m c: Installation auf Deutsch[15;18H
b: Messages
d'installation en Français[16;18H>[7mc: Installation
auf
Deutsch[16;18H[m c: Installation auf
Deutsch[17;18H>[7md:
Komunikaty instalacyjne w jezyku
polskim[17;18H[m[2;3Hitaj w
sysinst, systemie instalacyjnym NetBSD-2.1. To, oparte na
menu,
narzedzie zostalo stworzone aby pomoc ci zainstalowac
NetBSD na twardym [K
dysku, lub zaktualizowac istniejacy system NetBSD,
zuzywajac minimum czasu.
W ponizszych menu mozesz zmienic aktualne ustawienia
poprzez naciskanie[K
klawiszy (a, b, c, ...). Klawisze strzalek takze moga
dzialac. Aktywujesz
ustawienie poprzez nacisniecie ENTER.[K
[K[13;17H[K[14;17H[K[15;17H[K[16;17H[K[17;17H[K
[18;17H[K[9;2HJesli
uruchomiles komputer z dyskietki, mozesz ja teraz wyciagnac.
Dziekujemy za uzywanie NetBSD!
[12;14H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqk(B[13;14H(0x(B
System Instalacyjny
NetBSD-2.1[13;66H(0x(B[14;14H(0x(B[14;66H(0x(B[15;
14H(0x(B>[7ma:
Zainstaluj NetBSD na twardym
dysku[15;66H[m(0x(B[16;14H(0x(B b:
Zaktualizuj NetBSD na twardym
dysku[16;66H(0x(B[17;14H(0x(B c:
Przeinstaluj albo zainstaluj dodatkowe pakiety
(0x(B[18;14H(0x(B d:
Zrestartuj komputer[18;66H(0x(B[19;14H(0x(B e: Menu
Narzedziowe[19;66H(0x(B[20;14H(0x(B x: Wyjdz z
Systemu
Instalacyjnego[20;66H(0x(B[21;14H(0mqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[15;15H
a: Zainstaluj NetBSD na twardym dysku[16;15H>[7mb:
Zaktualizuj NetBSD
na twardym dysku[16;15H[m b: Zaktualizuj NetBSD na
twardym
dysku[17;15H>[7mc: Przeinstaluj albo zainstaluj
dodatkowe
pakiety[17;15H[m c: Przeinstaluj albo zainstaluj
dodatkowe
pakiety[18;15H>[7md: Zrestartuj komputer[18;15H[m
d: Zrestartuj
komputer[19;15H>[7me: Menu Narzedziowe[19;15H[m e:
Menu
Narzedziowe[20;15H>[7mx: Wyjdz z Systemu
Instalacyjnego[20;15H[m
[?1l># ls
.profile install mnt2
sysinstmsgs.fr upgrade
bin install.sub sbin
sysinstmsgs.pl usr
dev kern sysinst targetroot
usr.install
etc mnt sysinstmsgs.de tmp
var
# uname
uname: not found
# /bin.^H/uname
/bin./uname: not found
# quit
quit: not found
# halt
Oct 24 21:44:55 halt: halted by root
^Csyncing disks... done
halted.
hpcapm: suspend req
==SECOND==BOOT======================
mem_cluster_cnt = 2
mem_clusters[0] = {0x0,0x7b9000}
mem_clusters[1] = {0x7b9000,0x1047000}
loading 0x7b9000,0x1047000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
NetBSD 2.1 (RAMDISK) #0: Mon Oct 24 21:41:36 UTC 2005
buildsb2.netbsd.org:/home/builds/ab/netbsd-2-1-RELEASE/hpcm
ips/200510241747Z-obj/home/builds/ab/netbsd-2-1-RELEASE/src/
sys/arch/hpcmips/compile/RAMDISK
Compaq AERO 1530 (NEC VR4111 rev1.0 69.391MHz)
total memory = 24576 KB
avail memory = 15972 KB
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc52) Rev. 5.2 with
software emulated
floating point
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 32 TLB
entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
vr4102ip0 at mainbus0
vrbcu0 at vr4102ip0 addr 0x0b000000-001f
vrbcu0: CPU 69.391MHz, bus 23.130MHz, ram 23.130MHz
vrcmu0 at vr4102ip0 addr 0x0b000060-007f
vrgiu0 at vr4102ip0 addr 0x0b000100-011f
vrdmaau0 at vr4102ip0 addr 0x0b000020-0037
vrdcu0 at vr4102ip0 addr 0x0b000040-004b
com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working
fifo
com0: console
vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df
vrkiu0 at vr4102ip0 addr 0x0b000180-019f
hpckbd0 at vrkiu0: no keymap.
wskbd0 at hpckbd0 mux 1
vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf
vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7
vrled0 at vr4102ip0 addr 0x0b000240-024f
vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf
wsmouse0 at vrpiu0 mux 0
vraiu0 at vr4102ip0 addr 0x0b000160-017f
audio0 at vraiu0: half duplex
bivideo0 at mainbus0: pseudo video controller
bivideo0: framebuffer address: 0xaa000000
hpcfb0 at bivideo0
wsdisplay0 at hpcfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
md0: internal 4352 KB image area
boot device: <unknown>
root on md0a dumps on md0b
WARNING: preposterous clock chip time
-- CHECK AND RESET THE DATE!
root file system type: ffs
erase ^?, werase ^W, kill ^U, intr ^C
(B[H[J[?1h=[H[J
Welcome to sysinst, the NetBSD-2.1 system installation
tool. This
menu-driven tool is designed to help you install NetBSD to
a hard disk, or
upgrade an existing NetBSD system, with a minimum of work.
In the following menus type the reference letter (a, b, c,
...) to
select an
item, or type CTRL+N/CTRL+P to select the next/previous
item.
The arrow keys and Page-up/Page-down may also work.
Activate the current selection from the menu by typing the
enter key.
[13;17H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
(B[14;17H(0x(B>[7ma:
Installation messages in
English[14;63H[m(0x(B[15;17H(0x(B b:
Messages d'installation en Français
(0x(B[16;17H(0x(B c:
Installation auf Deutsch[16;63H(0x(B[17;17H(0x(B d:
Komunikaty
instalacyjne w jezyku polskim
(0x(B[18;17H(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqj(B[14;18H
a: Installation messages in English[15;18H>[7mb:
Messages
d'installation en Français[15;18H[m b: Messages
d'installation en
Français[16;18H>[7mc: Installation auf
Deutsch[16;18H[m c:
Installation auf Deutsch[17;18H>[7md: Komunikaty
instalacyjne w jezyku polskim[17;18H[m[2;3Hitaj w
sysinst,
systemie instalacyjnym NetBSD-2.1. To, oparte na menu,
narzedzie zostalo stworzone aby pomoc ci zainstalowac
NetBSD na twardym [K
dysku, lub zaktualizowac istniejacy system NetBSD,
zuzywajac minimum czasu.
W ponizszych menu mozesz zmienic aktualne ustawienia
poprzez naciskanie[K
klawiszy (a, b, c, ...). Klawisze strzalek takze moga
dzialac. Aktywujesz
ustawienie poprzez nacisniecie ENTER.[K
[K[13;17H[K[14;17H[K[15;17H[K[16;17H[K[17;17H[K
[18;17H[K[9;2HJesli
uruchomiles komputer z dyskietki, mozesz ja teraz wyciagnac.
Dziekujemy za uzywanie NetBSD!
[12;14H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqk(B[13;14H(0x(B
System Instalacyjny
NetBSD-2.1[13;66H(0x(B[14;14H(0x(B[14;66H(0x(B[15;
14H(0x(B>[7ma:
Zainstaluj NetBSD na twardym
dysku[15;66H[m(0x(B[16;14H(0x(B b:
Zaktualizuj NetBSD na twardym
dysku[16;66H(0x(B[17;14H(0x(B c:
Przeinstaluj albo zainstaluj dodatkowe pakiety
(0x(B[18;14H(0x(B d:
Zrestartuj komputer[18;66H(0x(B[19;14H(0x(B e: Menu
Narzedziowe[19;66H(0x(B[20;14H(0x(B x: Wyjdz z
Systemu
Instalacyjnego[20;66H(0x(B[21;14H(0mqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[15;15H
a: Zainstaluj NetBSD na twardym dysku[16;15H>[7mb:
Zaktualizuj NetBSD
na twardym dysku[16;15H[m[A>[7ma: Zainstaluj
NetBSD na
twardym dysku[16;15H[m b: Zaktualizuj NetBSD na twardym
dysku[15;15H[H
Zdecydowales sie zainstalowac NetBSD na twardym dysku.
Spowoduje to zmiane
informacji na twoim dysku. Powinienes zrobic pelny backup
danych przed
rozpoczeciem tej procedury! Zostana wykonane nastepujace
czynnosci: [K
a) Podzial dysku twardego[K
b) Stworzenie nowych systemow plikow BSD[K
c) Wgranie i zainstalowanie pakietow dystrybucji
(Po wprowadzeniu informacji o partycjach, ale jeszcze zanim
twoj dysk
zostanie zmieniony, bedziesz mial mozliwosc przerwac te
procedure.)
[K
Czy
kontynuowac?[K[13;14H[K[14;14H[K[15;14H[K[16;14H[K
[17;14H[K[18;14H[K[19;14H[K[20;14H[K[21;14H[K[13;2
H[13;33H(0lqqqqqqqqqqqqqqk(B[14;33H(0x(B
tak lub nie?
(0x(B[15;33H(0x(B[15;48H(0x(B[16;33H(0x(B>[7m
a: Nie[C[C[C[C[C[C[C[m(0x(B[17;33H(0x(B
b: Tak (0x(B[18;33H(0mqqqqqqqqqqqqqqj(B[16;34H
a:
Nie[17;34H>[7mb: Tak[m[H
[K
[K
[K[5;10H[K[6;10H[K[7;10H[K
[K
[K
[K[13;33H[K[14;33H[K[15;33H[K[16;33H[K[17;33H[K
[18;33H[K[H
Nie moge znalezc zadnych twardych dyskow do uzycia z
NetBSD. Zostaniesz
przeniesiony do menu glownego.
[11;24H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B[12;24H(0
x(B>[7mNacisnij
enter aby
kontynuowac[C[m(0x(B[13;24H(0mqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqj(B[12;25H[H
Witaj w sysinst, systemie instalacyjnym NetBSD-2.1. To,
oparte na menu,
narzedzie zostalo stworzone aby pomoc ci zainstalowac
NetBSD na twardym
dysku, lub zaktualizowac istniejacy system NetBSD,
zuzywajac minimum czasu.
W ponizszych menu mozesz zmienic aktualne ustawienia
poprzez naciskanie
klawiszy (a, b, c, ...). Klawisze strzalek takze moga
dzialac. Aktywujesz
ustawienie poprzez nacisniecie
ENTER.[11;24H[K[12;24H[K[13;24H[K[9;2HJesli
uruchomiles komputer
z dyskietki, mozesz ja teraz wyciagnac.
Dziekujemy za uzywanie NetBSD!
[12;14H(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqk(B[13;14H(0x(B
System Instalacyjny
NetBSD-2.1[13;66H(0x(B[14;14H(0x(B[14;66H(0x(B[15;
14H(0x(B>[7ma:
Zainstaluj NetBSD na twardym
dysku[15;66H[m(0x(B[16;14H(0x(B b:
Zaktualizuj NetBSD na twardym
dysku[16;66H(0x(B[17;14H(0x(B c:
Przeinstaluj albo zainstaluj dodatkowe pakiety
(0x(B[18;14H(0x(B d:
Zrestartuj komputer[18;66H(0x(B[19;14H(0x(B e: Menu
Narzedziowe[19;66H(0x(B[20;14H(0x(B x: Wyjdz
z Systemu
Instalacyjnego[20;66H(0x(B[21;14H(0mqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[15;15H
a: Zainstaluj NetBSD na twardym dysku[16;15H>[7mb:
Zaktualizuj NetBSD
na twardym dysku[16;15H[m b: Zaktualizuj NetBSD na
twardym
dysku[17;15H>[7mc: Prz
I've tried 3.0 also and 1.6 even.
Do you have any idea what to do?
|