vadem clio 1050 installer cannot find device to install onto

Thread: vadem clio 1050 installer cannot find device to install onto

Search this list only Search all lists
vadem clio 1050 installer cannot find device to install onto
	2007-05-05 11:05:41
Hi, I have dug through the archives but cannot find an (easy) way to get this working. The vadem clio 1050 does run the netbsd 3.1 installer via pbsdboot, but the installer cannot find the (other or same ) cf-card to install onto, nor can the installer find the 3com pcmcia card to do a net install. Since quite some people seem to have solved this with patched kernels and other addditional hints: can someone please provide me with working binaries or even an image of a working cf-card setup please? In the end I want to run ssh and possibly a webbrowser (either in framebuffer or X) that supports some javascript and graphics if possible. Network access should run via an old 3com ethernet or a wlan pcmcia card. Thanks for all pointers. If the soulution is to compile myself, then please point me to a feasible howto if that exists. Thanks,

Re: vadem clio 1050 installer cannot find device to install onto
United States	2007-05-06 16:19:52
On 2007-05-05 juergen.sellgmail.com wrote: > I have dug through the archives but cannot find an (easy) way to get > this working. > The vadem clio 1050 does run the netbsd 3.1 installer via pbsdboot, but > the installer cannot find the (other or same ) cf-card to install onto, nor > can the installer find the 3com pcmcia card to do a net install. 4.0_BETA should work (in the NetBSD-daily/netbsd-4 directory). > If the soulution is to compile myself, then please point me to a > feasible howto if that exists. It should be easy if you have just about any unix-like system available. The build.sh script builds the cross compile tools. Start with: ./build.sh -O /lfs/mobj -D /lfs/mdest -T /lfs/tools -m hpcmips tools kernel=VR41XX You can use -u when building kernels to avoid rebuilding the whole thing, but this seems to fail often when updating tools (which isn't necessary that often anyway). "Tracking NetBSD-current" under "How to get NetBSD" has basic info on CVS (use -r NetBSD-4 to track the release). -current sources are broken currently for VR systems and need the patch in port-hpcmips/36249, also at: http://www.city-net.com/~darkstar/netbsd/vr_idle.diff Matthew Orgass darkstarcity-net.com

Re: vadem clio 1050 installer cannot find device to install onto
Hong Kong	2007-05-06 00:58:22

For your reference: (1) Generic Kernel 3.1 used on a Toshiba TX3922 CPU HPC form factormachine (Sharp HPC 7000 probably equivalent to a Telios AJ1) (2) CF disk size =2G (3) CF card Partition scheme -->     (i) small MSDOS partition + (ii) NetBSD/ffs partition     For detailed partioning procedure, see     http://www.onlamp.com/pub/a/bsd/2003/06/05/Big_Scary_Daemons.html (4) Installation method: netinstall via ftp to ftp.netbsd.org using 3Com 589 pcmcia card A: disklabel reported ----> # /dev/rwd0d: type: unknown disk: NetBSD31 label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 16 sectors/cylinder: 1008 cylinders: 4065 total sectors: 4097520 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: #     ; size ; offset    fstype [fsize bsize cpg/sgs]  a:  1049328    65473 ;   4.2BSD  1024 8192 ; 0 # (Cyl. ;   64- 1105)  c: 4031102    65473 ;   unused      0     0       # (Cyl. ;   64- 4064)  d: 4097520      ; 0     unused      0     0       # (Cyl. ;     0 -   4064)  e:   65410 ;       63     MSDOS ;         ;         # (Cyl. ;     0-   64) ;f:   2097648  1114801    4.2BSD  2048 16384 21872 ; # (Cyl. ; 1105-  3186)  g: ; 664272  3212449    4.2BSD  1024 8192 41520 ; # (Cyl. ; 3186-  3845)  h: ; 98784 ; 3876721    4.2BSD  1024 8192 12352 ; # (Cyl. ; 3845-  3943)  i: ; 98784 ; 3975505    4.2BSD  1024 8192 12352 ; # (Cyl. ; 3943-  4041)  j: ; 21168 ; 4074289    4.2BSD  1024 8192 2648 # (Cyl. ; 4041-  4062) B: dmesg reported ----> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ;   The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 ;   The Regents of the University of California. All rights reserved. NetBSD 3.1 (GENERIC) #0: Tue Oct 31 02:56:39 UTC 2006 ;b1.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/hpcmips/200610302053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/hpcmips/compile/GENERIC" target=_blank rel=nofollow>buildsb1.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/hpcmips/200610302053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/hpcmips/compile/GENERIC Sharp HC-AJ1 (Japanese) (TOSHIBA TMPR3922 rev. 1.6 129.00 MHz) total memory = 28948 KB total memory banks = 2 memory bank 0 = 0x00000000 3816KB(0x003ba000) memory bank 1 = 0x003ba000 25132KB(0x0188b000) avail memory = 24188 KB mainbus0 (root) cpu0 at mainbus0: Toshiba TX3922 CPU (0x2230) Rev. 3.0 with software emulated floating point cpu0: 16KB/16B 2-way set-associative Instruction cache, 64 TLB entries cpu0: 8KB/16B 2-way set-associative write-back Data cache txsim0 at mainbus0 tx39icu0 at txsim0 tx39power0 at txsim0 tx39clock0 at txsim0 tx39io0 at txsim0 tx39sib0 at txsim0: 1.536 MHz ucb0 at tx39sib0 slot 0: TOSHIBA TC35413F ucbtp0 at ucb0: wsmouse at ucbtp0 not configured ucbsnd0 at ucb0: audio 3.692 kHz telecom 1.200 kHz ucbio0 at ucb0 tx39biu0 at txsim0 tx39spi0 at txsim0 txioman0 at txsim0 tx39uart0 at txsim0 txcom0 at tx39uart0 slot 0 txcom1 at tx39uart0 slot 1 txcsbus1 at tx39biu0 teliosio0 at txcsbus1 regcs KUCS1 16bit 0+0xffffffff tc5165buf0 at txcsbus1 iocs CS1 16bit 0+0x100: polling mode hpckbd0 at tc5165buf0 wskbd0 at hpckbd0: console keyboard plum0 at txcsbus1 regcs CS3 32bit 0+0xffffffff iocs MCS0 32bit 0+0xffffffff memcs MCS1 32bit 0+0xffffffff irq1 277(8:21): Plum2 #2 plumicu0 at plum0 plumpower0 at plum0 plumvideo0 at plum0: display mode: 8bpp hpcfb0 at plumvideo0: 800x480 pixels, 256 colors, 100x48 chars wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ohci0 at plum0 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered plumpcmcia0 at plum0 pcmcia0 at plumpcmcia0 ep0 at pcmcia0 function 0: <3Com, Megahertz 589E, TP/BNC LAN PC Card, 005> ep0: address 00:01:02:7f:b9:97, 8KB byte-wide FIFO, 5:3 Rx:Tx split ep0: 10baseT, 10base5, 10base2 (default 10baseT) pcmcia1 at plumpcmcia0 wdc1 at pcmcia1 function 0: <SAMSUNG, 04/05/06> wdc1: i/o mapped mode atabus0 at wdc1 channel 0 hpcioman1 at txioman0 hpcin0 at hpcioman1 iochip IO, port 7, type 4, id 16, interrupt edge [p] hpcin1 at hpcioman1 iochip IO, port 8, type 4, id 17, interrupt edge [p] hpcin2 at hpcioman1 iochip IO, port 6, type 0, id 4, interrupt edge [p] hpcin3 at hpcioman1 iochip MFIO, port 27, type 2, id 32, interrupt edge [pn] hpcin4 at hpcioman1 iochip MFIO, port 29, type 2, id 36, interrupt edge [pn] hpcout0 at hpcioman1 iochip IO, port 4, type 3, id 26 btnmgr0 at mainbus0 wskbd1 at btnmgr0 mux 1 wskbd1: connecting to wsdisplay0 hpcapm0 at mainbus0: pseudo power management module apmdev0 at hpcapm0: Power Management spec V1.2 wd0 at atabus0 drive 0: <SAMSUNG CF/ATA> wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 2000 MB, 4065 cyl, 16 head, 63 sec, 512 bytes/sect x 4097520 sectors boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs peter HKSAR, PRC *Juergen Sell <juergen.sellgmail.com>* wrote: Hi, I have dug through the archives but cannot find an (easy) way to get this working. The vadem clio 1050 does run the netbsd 3.1 installer via pbsdboot, but the installer cannot find the (other or same ) cf-card to install onto, nor can the installer find the 3com pcmcia card to do a net install. Since quite some people seem to have solved this with patched kernels and other addditional hints: can someone please provide me with working binaries or even an image of a working cf-card setup please? In the end I want to run ssh and possibly a webbrowser (either in framebuffer or X) that supports some javascript and graphics if possible. Network access should run via an old 3com ethernet or a wlan pcmcia card. Thanks for all pointers. If the soulution is to compile myself, then please point me to a feasible howto if that exists. Thanks, Don't pick lemons. See all the new 2007 cars at Yahoo! Autos.
Re: vadem clio 1050 installer cannot find device to install onto
	2007-05-11 05:59:46
Thanks, it was real easy once I knew where to start. I got the netbsd-4 daily 20070507 up and running on a 1GB CF card. 2007/5/6, Matthew Orgass <darkstarcity-net.com>: > 4.0_BETA should work (in the NetBSD-daily/netbsd-4 directory). So far I avoided the compile cycle but will keep it in mind. The basic system is running fine, a couple questions popped up which may or may not be Vadem Clio centric. For clarity I will start a different thread. Juergen

[1-4]

about | contact Other archives ( Real Estate discussion Medical topics )