List Info

Thread: configuring se0 device
configuring se0 device
user name
 2006-09-12 00:40:27 
On Mon, Sep 11, 2006 at 05:18:22PM -0700, Thomas Carlson
wrote:
> After "ifconfig se0" I get:
> 
> se0  flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
> 		address:00:00:1d:0d:c8:80

OK.  So it looks unchanged from when you first run it.

Just to be 100% clear...  You're seeing something like the
following?

# ifconfig se0
se0: flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
		address:00:00:1d:0d:c8:80
# ifconfig se0 192.168.1.99 netmask 255.255.255.0
se0: device enable failed
# ifconfig se0
se0: flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
		address:00:00:1d:0d:c8:80
# 

Thanks,
-allen

-- 
Allen Briggs  |  http://www.ninthw
onder.com/~briggs/  |  briggsninthwonder.com
configuring se0 device
user name
 2006-09-12 00:54:59 
Oops, I get the following when I do the whole sequence.

On Monday, September 11, 2006, at 05:40 PM, Allen Briggs
wrote:

> On Mon, Sep 11, 2006 at 05:18:22PM -0700, Thomas
Carlson wrote:
>> After "ifconfig se0" I get:
>>
>> se0  flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
>> 		address:00:00:1d:0d:c8:80
>
> OK.  So it looks unchanged from when you first run it.
>
> Just to be 100% clear...  You're seeing something like
the
> following?
>
> # ifconfig se0
> se0: flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
> 		address:00:00:1d:0d:c8:80

yes

> # ifconfig se0 192.168.1.99 netmask 255.255.255.0
> se0: device enable failed

yes

> # ifconfig se0
> se0: flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
> 		address:00:00:1d:0d:c8:80

Then, I get:

se0  flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
		address:00:00:1d:0d:c8:80
		inet 192.168.2.2 netmask 0xffffff00 brpadcast
192.168.2.255
		inet6 fe80::200:1dff:fe0d:c88%se0  prefixlen 64 scopeid
0x1


Thanks for being so patient with me.

Tom
configuring se0 device
user name
 2006-09-12 01:45:06 
On Mon, Sep 11, 2006 at 05:54:59PM -0700, Thomas Carlson
wrote:
> se0  flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST>  mtu 1500
> 		address:00:00:1d:0d:c8:80
> 		inet 192.168.2.2 netmask 0xffffff00 brpadcast
192.168.2.255
> 		inet6 fe80::200:1dff:fe0d:c88%se0  prefixlen 64
scopeid 0x1

Ah...  So it thinks it succeeds.  And after it shows this,
you
still can't ping 192.168.2.1 ?  (assuming that's your
router)

-allen

-- 
Allen Briggs  |  http://www.ninthw
onder.com/~briggs/  |  briggsninthwonder.com
[1-3]

about | contact  Other archives ( Real Estate discussion Medical topics )