On Monday, September 11, 2006, at 04:50 PM, Allen Briggs
wrote:
> On Mon, Sep 11, 2006 at 04:33:04PM -0700, Thomas
Carlson wrote:
>>> OK. Is there any kind of link notification on
the cabletron box?
>> Yes, the box has an LED indicating that a link has
been established.
>
> OK. And is that lit at any point (or at all points)
while running
> NetBSD?
Yes, the link light is lit at all times and another that
indicates that
the adapter is receiving data packets from the network is
also flashing.
>
>>> Is the interface marked as "UP"
with an IP address after the
>>> ifconfig command?
>> No, after:
>> ifconfig se0 inet 192.168.2.2
>> I get:
>> se0: device enable failed
>
> If you run 'ifconfig se0' after you get 'se0: device
enable failed',
> do you see anything? Or do you just get the 'se0:
device enable
> failed'
> message again? If you see anything different, what do
you see?
After "ifconfig se0" I get:
se0 flags=8822<BROADCAST,
NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
address:00:00:1d:0d:c8:80
>
> Thanks,
> -allen
>
> --
> Allen Briggs | http://www.ninthw
onder.com/~briggs/ |
> briggs ninthwonder.com
>
>
|