Testers needed for upcoming 3.1 release

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

> I don't know how to specify to load ofwboot.xcf on HFS
partition
> on OF 2 machines

I'm pretty sure OF2 can't read HFS partitions. Only OF3 or
newer can.

> , but "boot scsi-int/sd3:0 NETBSD.MACPPC"
method
> (which is mentioned in INSTALL note) will never work.
> (see PR toolchain/30245)

On OF 1.0.5 'boot scsi-int/sd3:,\ofwboot.xcf' should
work, can anyone 
confirm this?

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRQBSMMpnzkX8Yg2nAQJOEQf/byJ6eEjw3oFXPig1yzig7aweY4Ga
4rzm
UDuuMMINQYycKJEDpGgjAcbx/DYGD/SzfeJMBLFJeR25cFMSBBQ0Ro9tRXTm
hcf6
s0Dd5+hecfqkmjKp112YfXoK+/hXcZwcG2Ugf53m+/zAp9TB6CXkHhYfOBQL
BOnS
+v5sGgDmnqLcePAYWyQ9p1oYW2W9xqLh6/A0zzT2d73GMxdwxlEq183fVbUp
57zg
s4NXTepvIdDJmLjkT+OonVGBBKdjGMg74Py9DxDICzgAVq/+6I85Z8c82GxB
Oyib
2xSwVpDWIQCJuIWg3Bn3luydCcm3n+TkIjGSn4/LuDgYVvBljvWDdw==
=N/z2
-----END PGP SIGNATURE-----

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Sep 7, 2006, at 09:24, Izumi Tsutsui wrote:

> wdc0 at obio0 offset 0x20000 irq property not found;
using 13: DMA 
> transfer
> atabus0 at wdc0 channel 0
...
> wd0 at atabus0 drive 0: <Maxtor 82160D2>
> wd0: drive supports 16-sector PIO transfers, LBA
addressing
> wd0: 2014 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect
x 4124736 
> sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 2 (Ultra/33)
> wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)

Is that a heathrow-ata? If so - do IDE DMA transfers
actually work 
properly? On my beige G3 I get messages about lost
interrupts and more 
often than not transfers end up with garbage. With DMA
disabled it 
works fine.

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRQBWRcpnzkX8Yg2nAQJY4Af/XkIwCcqMQaqDB0P4VULyAC2boETK
u6hx
kQBluouhvgdcSipkMG9UCLmXulzCnBby/O7iv7KZ6Xf9YLPk1HTlTEFo2U1Q
cYU/
T5DqwD4LXfJNPNdvptwXQIYg7Gy90AjVl53M3Dkx5NJiNfPlNSRmwcDSP/cS
W/B7
CaqI4GaATHyBzS+uasbuu/F2Zq815widz6OPlXlOKrMXqQd1cN3vtbf3/8gf
r13m
Hk9yHZtvOoX7nHrv8jpaCC+LLTZvJkVr7/6byMGE7V7yQ9IBg64//F6FfSfV
q28g
W32ILb7g08gMIUbucF4SgDGgze42HKHN0NIdkcXejwmpoHg7LUd/rQ==
=MHxj
-----END PGP SIGNATURE-----

macallanNetBSD.org wrote:

> Is that a heathrow-ata?

No, it's old OHARE.

> On my beige G3 I get messages about lost interrupts and
more 
> often than not transfers end up with garbage. With DMA
disabled it 
> works fine.

Maybe it requires different ide_timings on DMA, but I'm not
sure.
---
Izumi Tsutsui

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Sep 7, 2006, at 13:34, Izumi Tsutsui wrote:

> macallanNetBSD.org wrote:
>
>> Is that a heathrow-ata?
>
> No, it's old OHARE.
>
>> On my beige G3 I get messages about lost interrupts
and more
>> often than not transfers end up with garbage. With
DMA disabled it
>> works fine.
>
> Maybe it requires different ide_timings on DMA, but
I'm not sure.

Hmm, there's an OF property with timing information - I'll
play with 
that for a bit I guess.

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRQBbT8pnzkX8Yg2nAQIY0QgAqT3CI9h4pDUTsVVpMnA6DBC7nUqZ
1yRX
LtLoezDRmZK6TMs9Iy7cxDT+ZpeCI7EhqMz3jjOoebcAukKCNkV0IILOp88c
3yDM
Lf0GLDbK84cCNbGN/uFzTZRko2pA8IGOKUCP3EiArmB1Fhm+NOj/0BP4ogFT
p6DH
M1V2zqUP2MX34BHr91vVph253Dav3ATKbP/W8yGVqPqMbAolVk8v8Z/8wxmu
kKnu
eDQZA74ZC/DV5+7nKfrbGa6ujrXOsuO7lOsZx84LJicSfdtum4DH179vb46b
P77G
bDSowIM4lGfTPPshctPIjnPiDutCp/ytYI4M6U/1rkxGB5Tczi53aQ==
=TpAv
-----END PGP SIGNATURE-----

macallannetbsd.org wrote:

> I'm pretty sure OF2 can't read HFS partitions. Only
OF3 or newer can.

BTW, OF2 can still read HFS floppy.

> > (see PR toolchain/30245)

I've updated diff in this PR and created 3.1_RC2 macppccd:
ftp://ftp.NetBSD.org/pub/NetBSD/misc/tsutsui/distrib-cdrom-m
acppccd-3.1_RC2.diff
ftp://ftp.NetBSD.org/pub/NetBSD/misc/tsutsui/macppccd-3.1_RC
2.iso.gz


It just works even on my Apus (with OF2):
---

Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot scsi-int/sd3:0 DEFAULT CATCH!, code=FFF00300 at  
%SRR0: FF80AC9C   %SRR1: 0000B070

 [always hangs up at first; needs CTRL-CMD-POWER to recover]

Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot scsi-int/sd3:0
OF_open bootpath=scsi-int/sd3
read stage 2 blocks: 0. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.10
>> (buildsb4.netbsd.org, Sun Sep  3 19:56:44 UTC
2006)
open /netbsd: Device not configured
open /netbsd.gz: Device not configured
4473680+105536=0x45e26c
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights
reserved.

NetBSD 3.1_RC2 (INSTALL) #0: Sun Sep  3 20:20:59 UTC 2006
	buildsb4.netbsd.org:/home/builds/ab/netbsd-3-1-RC2/macppc/2
00609031430Z-obj/home/builds/ab/netbsd-3-1-RC2/src/sys/arch/
macppc/compile/INSTALL
total memory = 65536 KB
avail memory = 57744 KB
no active packagemainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>
cpu0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0008 (rev. 0x02)
epic0 at pci0 dev 13 function 0: SMC 83c170 Fast Ethernet,
rev. 6
epic0: interrupting at irq 23
epic0: SMC9432TX, Ethernet address 00:e0:29:1a:b1:ab
qsphy0 at epic0 phy 3: QS6612 10/100 media interface, rev. 1
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
adb0 at obio0 offset 0x16000 irq 18: 1 targets
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0 mux 1
wdc0 at obio0 offset 0x20000 irq property not found; using
13: DMA transfer
atabus0 at wdc0 channel 0
md0: internal 2048 KB image area
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-506,
8S05> cdrom removable
wd0 at atabus0 drive 0: <Maxtor 82160D2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 2014 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x
4124736 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 4 days -- CHECK AND RESET THE DATE!
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
mount_mfs: Unable to determine file system size
Terminal type? [vt100] 
Erase is backspace.
(I)nstall, (S)hell or (H)alt ? s
# 
---

> On OF 1.0.5 'boot scsi-int/sd3:,\ofwboot.xcf' should
work, can anyone 
> confirm this?

'boot scsi-int/sd3:,\ofwboot.xcf' doesn't work on OF 2.0
(my Apus):

---
Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot scsi-int/sd3:0,\ofwboot.xcf bad partition number,
using 0DEFAULT CATCH!, code=FFF00300 at   %SRR0: FF80AC9C  
%SRR1: 0000B070

[hangup; CTRL-CMD-POWER]

Open Firmware, 2.0
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot scsi-int/sd3:,\ofwboot.xcf bad partition number,
using 0

[hangup again]

---
Izumi Tsutsui

I wrote:

> mount_mfs: Unable to determine file system size

Ah, we still have a problem mentioned in PR bin/28884.
(or src/distrib/macppc/floppies/ramdisk/dot.profile should
be fixed)
---
Izumi Tsutsui

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Sep 8, 2006, at 10:49, Izumi Tsutsui wrote:

> macallannetbsd.org wrote:
>
>> I'm pretty sure OF2 can't read HFS partitions.
Only OF3 or newer can.
>
> BTW, OF2 can still read HFS floppy.

It refused to read the MacOS partition on my disk, unlike
3.0.

>>> (see PR toolchain/30245)
>
> I've updated diff in this PR and created 3.1_RC2
macppccd:
>
ftp://ftp.NetBSD.org/pub/NetBSD/misc/tsutsui/distrib-cdrom-m
acppccd 
> -3.1_RC2.diff
>
ftp://ftp.NetBSD.org/pub/NetBSD/misc/tsutsui/macppccd-3.1_RC
2.iso.gz

Still no luck on the G3:

OpenFirmware 2.0f1

boot ide1/0:,ofwboot.xcf  bad partition number, using 0DEFAULT
CATCH!  
code=FFF00700 %SRR0: 00004000 %SRR1: 00083070

boot ide1/0:0  DEFAULT CATCH! code=FFF00700 %SRR0: 00004000
%SRR1:  
00083070

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRQHOrspnzkX8Yg2nAQIoMgf/TKO5+dRoOeZIVb6f7hIkNCp4mxqT
o2v8
tpVlGtmr3cRvrnHy/rhD3WMu8ArtcJa7fIt+N/EYHiMEAnvBPSpg0nzXRdla
VtH9
jmIVGCJGJpqzL23yG+v9KZYei15BhVboUv6VVK79+kPaznLFcYYi3q9T4gHD
22df
IWpaDOz7HcEr51BheZIN3Z37kTmoQbyoHiQUpfzPbayoG1gneuZX0PEKdAI1
JBUy
pokUk8ial/z++3LteX2kfG0jFFc+aQ4Xme6gXqLIlp1WSMqIXmmwRUh+urRS
Y1DN
K2Nahkqsrs5IlBpPZObEXwMWkW/RGteDeMvmQWhoarvuqKw1MHPmNQ==
=dtZX
-----END PGP SIGNATURE-----

macallan1888gmail.com wrote:

> Still no luck on the G3:
> 
> OpenFirmware 2.0f1
> 
> boot ide1/0:,ofwboot.xcf  bad partition number,
using 0DEFAULT CATCH!  
> code=FFF00700 %SRR0: 00004000 %SRR1: 00083070
> 
> boot ide1/0:0  DEFAULT CATCH! code=FFF00700 %SRR0:
00004000 %SRR1:  
> 00083070

Hmm.
Does it boot from a harddisk via bootxx + ofwboot (not
ofwboot.xcf)?
Does it boot from an ISO CD-ROM of 1.6-release?

I guess it requires some more info in the apple partition
map.
---
Izumi Tsutsui

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Sep 8, 2006, at 18:29, Izumi Tsutsui wrote:

> macallan1888gmail.com wrote:
>
>> Still no luck on the G3:
>>
>> OpenFirmware 2.0f1
>>
>> boot ide1/0:,ofwboot.xcf  bad partition number,
using 0DEFAULT CATCH!
>> code=FFF00700 %SRR0: 00004000 %SRR1: 00083070
>>
>> boot ide1/0:0  DEFAULT CATCH! code=FFF00700 %SRR0:
00004000 %SRR1:
>> 00083070
>
> Hmm.
> Does it boot from a harddisk via bootxx + ofwboot (not
ofwboot.xcf)?

Yes. It also happily loads ofwboot.xcf via network.

> Does it boot from an ISO CD-ROM of 1.6-release?

Didn't try that so far.

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRQIbB8pnzkX8Yg2nAQI+Rgf/RiPv2E87Ki9marxq4Q7zSj9yv+iR
fX9W
9lf+fktnwxMnBCiy+80Rh5FuZGJeDoba3ix3Y8T+sdt8YkTcM/GNWsraf71n
34Fg
QyE9MP91F5UBvrYeqtpIW3augh9tyEdULalBrytbeiBLiE2Cf0idxEwW87k7
Sk4B
PwrODORXYf/nkKgxeYLHGPDfElKuK0TrkNCODGeSZexrJBHTIB0EXC+QJVf2
jLNv
Trjx5KpBAd1vjO3fW+UBdgBcuFklol/8f4sb6siGT+DyxHGE6/ZKWmkB5k5r
fHNg
+PrjD7deHM7IegtkQwvF0zHZCAOAGg3SkxXjDuaeHjiekAAk06wXuA==
=UMFZ
-----END PGP SIGNATURE-----

Hi,

I`ve downloaded the 3.1_RC2 installation  CD and booted it
up on my eMac. The eMac is:

eMac G4 1.25GHz / USB 2.0 / ATI 9200 / PowerPC 7447A

The installation disc booted just fine and everything went
OK. I`ve also tested the `gem0' driver transferring some
large file across the LAN and it worked without any problems
and at the max speed for a 100 Mbps Ethernet network .

Also the `reboot' worked just fine, so I guess that power
management is doing well.

I`d also like to do a normal installation of NetBSD 3.1_RC2
and build a kernel to test the `snapper' audio; and also
the X server. I`ll post here the results if I do so.

The clock in NetBSD 2.1 suffers from this problem: http://mail-index.netbsd.org/port-macppc/2006/06/21
/0001.html ; I might do some tests on NetBSD 3.1_RC to
test how it works.

Here is the dmesg:

NetBSD 3.1_RC2 (INSTALL) #0: Sun Sep  3 20:20:59 UTC 2006
	buildsb4.netbsd.org:/home/builds/ab/netbsd-3-1-RC2/macppc/2
00609031430Z-obj/home/builds/ab/netbsd-3-1-RC2/src/sys/arch/
macppc/compile/INSTALL
total memory = 768 MB
avail memory = 733 MB
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary)
cpu0: HID0
8450c0bc<EMCP,EICE,NAP,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT
>
cpu0: 1250.00 MHz, 512KB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0034 (rev. 0x00)
ofb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x5962
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 0x106b product 0x0035 (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout.
command = 0x0
0 targets
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: vendor 0x106b product
0x003f (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: vendor 0x106b product
0x003f (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: vendor 0x106b product
0x003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x106b OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: vendor 0x1033 product
0x0035 (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1033 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: vendor 0x1033 product
0x0035 (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x1033 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vendor 0x1033 product 0x00e0 (USB serial bus, interface
0x20, revision 0x04) at pci1 dev 27 function 2 not
configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: vendor 0x106b product 0x0036 (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
vendor 0x106b product 0x0031 (Firewire serial bus, interface
0x10, revision 0x81) at pci2 dev 14 function 0 not
configured
gem0 at pci2 dev 15 function 0: vendor 0x106b product 0x0032
(rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0d:93:57:39:60, 10KB RX fifo, 4KB
TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev.
4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
md0: internal 2048 KB image area
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4481B, ,
2.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhub3 at uhub1 port 1uhidev0 at uhub2 port 1 configuration 1
interface 0
uhub3: Mitsumi Electric Hub in Apple Extended USB Keyboard,
class 9/0, rev 1.10/4.10, addr 2

uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40,
addr 2, iclass 3/1
uhub3: 3 ports with 2 removable, bus powered
uhid at uhidev0 not configured
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev
1.10/4.10, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev
1.10/4.10, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid at uhidev2 reportid 2 not configured
uhid at uhidev2 reportid 3 not configured
wd0 at atabus1 drive 0: <ST340015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x
78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
5 (Ultra/100) (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 5 days -- CHECK AND RESET THE DATE!

For comparison, this is the `dmesg' of a NetBSD 2.1 kernel:

NetBSD 2.1 (EMAC) #0: Sun Nov 27 19:10:11 UTC 2005
	rootununhexium:/usr/src/sys/arch/macppc/compile/EMAC
total memory = 768 MB
avail memory = 734 MB
mainbus0 (root)
cpu0 at mainbus0: Version 0x8003 (Revision 0x0101), ID 0
(primary)
cpu0: HID0
8410c09c<EMCP,EICE,DPM,ICE,DCE,SGE,FBIOB,ABE,BHT>
cpu0: 1250.00 MHz, 256KB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product
0x5962
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000snapper0: irq 30,1,2
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout.
command = 0x0
0 targets
apm0 at adb0: battery flags 0x9, 0% charged
ki2c0 at obio0
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer product
0x003f (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer product
0x003f (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer product
0x003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller
(rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller
(rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
NEC USB Host Controller (USB serial bus, interface 0x20,
revision 0x04) at pci1 dev 27 function 2 not configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth
Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:0d:93:ff:fe:57:39:60, 400Mb/s, 2048
max_rec, 8 ir_ctx, 8 it_ctx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet
(rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0d:93:57:39:60, 10KB RX fifo, 4KB
TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev.
4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
audio0 at snapper0: full duplex
atapibus0 at atabus0: 2 targets
fw0 at fwohci0:
00:0d:93:ff:fe:57:39:60:0a:02:ff:ff:f0:01:00:00
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4481B, ,
2.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
uhub3 at uhub1 port 1uhidev0 at uhub2 port 1 configuration 1
interface 0
uhub3: Mitsumi Electric Hub in Apple Extended USB Keyboard,
class 9/0, rev 1.10/4.10, addr 2

uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40,
addr 2, iclass 3/1
uhub3: 3 ports with 2 removable, bus powered
ums0 at uhidev0: 1 button
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev
1.10/4.10, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub3 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev
1.10/4.10, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
wd0 at atabus1 drive 0: <ST340015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x
78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
5 (Ultra/100) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs


------------------------------------------------------------
--
Marco Trillo
marcotrillogmail.com
http://artemis.tmdel.ath
.cx/