PowerBook G3 Series (PDQ) OF Boot Command

Search the archives for PDQ or wallstreet.

Make sure you have the nvram patches loaded

setenv boot-device ide0/0:0
reset-all
boot

On Oct 10, 2006, at 3:40 PM, Eric Berna wrote:

> I recently acquired a PowerBook G3 (PDQ), and I want to
run NetBSD  
> on it.  I
> can get it to boot from floppy disks and run the
installer.  But I  
> can't
> figure out the boot command for the internal hard
drive.  Does  
> anybody have
> an example boot command for booting from the internal
hard drive on  
> this
> machine?
>
> Eric Berna
> ebernaasq.org
>
>
> !DSPAM:452c6c55107822089216672!
>
>
>

Hi,

This worked.  Thank you very much.

Eric Berna
ebernaasq.org


On 10/11/06 8:08 AM, "Chris Tribo" <ctribodtcc.edu> wrote:

> Search the archives for PDQ or wallstreet.
> 
> Make sure you have the nvram patches loaded
> 
> setenv boot-device ide0/0:0
> reset-all
> boot
> 
> On Oct 10, 2006, at 3:40 PM, Eric Berna wrote:
> 
>> I recently acquired a PowerBook G3 (PDQ), and I
want to run NetBSD
>> on it.  I
>> can get it to boot from floppy disks and run the
installer.  But I
>> can't
>> figure out the boot command for the internal hard
drive.  Does
>> anybody have
>> an example boot command for booting from the
internal hard drive on
>> this
>> machine?
>> 
>> Eric Berna
>> ebernaasq.org
>> 
>> 
>> !DSPAM:452c6c55107822089216672!
>> 
>> 
>> 
>