Power Macintosh 9500 / 132

Hello all,

Someone have any idea about what it's wrong?

I appreciate some helps,

Thanks a lot.

Marcos



On 10/30/06, Marcos Onisto <mlonistogmail.com> wrote:
> Hello Michael,
>
> Follow below my commands:
>
> OBS: For all commands that i tried the LED blink ok.
>
> 0 >   ok
> 0 >   ok
> 0 >   ok
> 0 > boot scsi-int/sd6  can't OPEN:
scsi-int/sd6
>  ok
> 0 > boot scsi-int/sd6:0  can't OPEN:
scsi-int/sd6:0
>  ok
> 0 > boot scsi-int/sd6:0 netbsd.macppc  can't
OPEN: scsi-int/sd6:0
>  ok
> 0 > boot scsi-int/sd6:,ofwboot.xcf
netbsd.macppc  can't OPEN:
> scsi-int/sd6:,ofwboot.xcf
>  ok
> 0 > boot scsi-int/sd6:0,ofwboot.xcf
netbsd.macppc  can't LOAD from this device
>  ok
> 0 > boot scsi-int/sd6:,ofwboot.xcf
netbsd.macppc  can't OPEN:
> scsi-int/sd6:,ofwboot.xcf
>  ok
> 0 > boot scsi-int/sd6:0,ofwboot.xcf
netbsd.macppc can't OPEN:
> scsi-int/sd6:0,ofwboot.xcf
>  ok
> 0 > boot scsi-int/sd6:0,ofwboot.xcf;1
netbsd.macppc;1  can't OPEN:
> scsi-int/sd6:0,ofwboot.xcf;1
>  ok
> 0 > boot scsi-int/sd6:0,ofwboot.xcf;1
netbsd.macppc;1  can't OPEN:
> scsi-int/sd6:0,ofwboot.xcf;1
>  ok
> 0 > boot scsi-int/sd6:,ofwboot.xcf;1
netbsd.macppc;1  can't OPEN:
> scsi-int/sd6:,ofwboot.xcf;1
>  ok
>
>
> OBS: When i put in my second Cd-rom device on BUS 0 (
scsi ) the
> errors change like that:
>
>
> 0 > boot scsi/sd6:0                    # it
command doesnt return me anything.
>
> 0 > boot scsi/sd6:0 netbsd.macppc      # it
command doesnt return me anything.
>
> 0 > boot scsi/sd6:0,ofwboot.xcf
netbsd.macppc bad partition number,
> using 0_          # it command doesnt return me the
prompt.
>
> 0 > boot scsi/sd6:0,ofwboot.xcf;1
netbsd.macppc;1 bad partition
> number, using 0_      # it command doesnt return me the
prompt.
>
> 0 > boot scsi/sd6:,ofwboot.xcf
netbsd.macppc bad partition number,
> using 0_            # it command doesnt return me the
prompt.
>
> 0 > dev scsi   ok
> 0 > show-children
> Target 0
>   Unit 0  Disk          QUANTUM FIREBALL ST3.2S OFOC
> Target 2
>   Unit 0  Disk          QUANTUM FIREBALL ST3.2S OFOC
> Target 6
>   Unit 0  Removable Read Only device    TOSHIBA CD-ROM
XM-4101TA0064
>  ok
>
> I was exactly what i did.
>
> I appreciate some helps.
>
> Thanks a lot,
>
> Marcos
>
>
> On 10/30/06, Michael Lorenz <macallannetbsd.org> wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Hello,
> >
> > On Oct 30, 2006, at 06:54, Marcos Onisto wrote:
> >
> > > I inverted my Cd-rom's devices and i got
different results. When i try
> > > to boot on my second Cd-rom, i can see
Cd-rom's Led blink quicky, but
> > > i happen only when i try the boot command or
i got the other error
> > > about "error on partition 0" or
it's stop and not return me a error.
> >
> > So what exactly did you do? Did you try partition
0 or :,ofwboot.xcf?
> > Anyway, the drive's LED blinking shows that you're
on the right way.
> >
> > > I appreciate some helps.
> >
> > Then tell us EXACTLY what you did and EXACTLY what
happened as a result.
> >
> > have fun
> > Michael
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.2.4 (Darwin)
> >
> >
iQEVAwUBRUYM88pnzkX8Yg2nAQICqAf9FgqwZGtTTMdrvUfvN53k1aqpajiJ
dN+v
> >
zONz0qG50m4XOq9nx6YxIRUGKIUTNCqcymjiGNzjHCMAzCJOGxi4PRSUSq72
8plj
> >
B1YZAzS+amHXm1ZRbZYfjHGYrkAPNaBAGEg6pJh5EtPupIwYoyjPbIKklyg9
iZSN
> >
RmxO26T6U9Y1mxd9kmwBAhXePgzVoy5nD2ntd7zZHS/69NMsqTyzN1H5woHk
QSiZ
> >
AQPb9d16s9gjwpSyq0p0w6kk2G12wa2UhKAHBc5w8e1J7TsQXtFCwAFkdR69
yoPK
> >
xGW/fA4arzXv3H1EEHTYkjXtgKIQhIGXev02Jtf0KPa8/JgyWI++eg==
> > =VcTV
> > -----END PGP SIGNATURE-----
> >
> >
>