ibook G3,current kernel panic

Hello.

I'd like to use current with ibook G3 466MHz with firewire,
get the latest source today and tryed to boot the kernel
(cross
compiled on i386).

But it panics

------------------------------------------------------------
-
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
panic: cnopen: no console device
Stopped in pid 16.1 <init> at  
netbsd:cpu_Debugger+0x10:   Lwz   r0,
r1, 0x14
db> bt
0xd964bcb0: at panic+0x1b4
0xd964bd00: at cnopen+0x12c
0xd964bd30: at spec_open+0x204
0xd964bd70: at VOP_OPEN+0x38
0xd964bda0: at vn_open+0x200
0xd964be40: at sys_open+0xe0
0xd964bee0: at syscall_plain+0x1f0
0xd964bf40: user SC trap #5 by 0xefec7e0c: srr1=0xd032
                        r1=0xffffddd0 cr=0x20000082 xer=0
ctr=0xefec7e04

db>
------------------------------------------------------------
-----
This is my first post and thanks for reading.

Masafumi Hotta


Here is dmesg on 3.1

------------------------------------------------------------
-----
NetBSD 3.1 (GENERIC) #0: Tue Oct 31 05:09:13 UTC 2006
        buildsb1.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/macp
pc/200610302
053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/macp
pc/compile/GENERIC
total memory = 192 MB
avail memory = 175 MB
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0
8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 466.67 MHz, 512KB WB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies Rage
Mobility M3 (AGP)
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
enabling KeyLargo internal modem
i2s at obio0 offset 0x10000 not configured
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at obio0 offset 0x16000 irq 47: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese
layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400
dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: buttons
apm0 at adb0: battery flags 0x4, 76% charged
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atabus1 at wdc1 channel 0
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
atabus2 at wdc2 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB
Controller (rev. 0x
00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB
Controller (rev. 0x
00)
ohci1: can't map mem space
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
fwohci0 at pci2 dev 14 function 0: Apple Computer product
0x0018 (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI 0.0, ff:65:30:00:c0:a3:bb:fe, 100Mb/s, 2
max_rec, 4 ir_ctx, 4 it_c
tx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet
(rev. 0x01)
gem0: interrupting at irq 41
gem0: Ethernet address 00:30:65:bb:a3:c0, 10KB RX fifo, 4KB
TX fifo
bmtphy0 at gem0 phy 0: BCM5201 10/100 media interface, rev.
2
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
Kernelized RAIDframe activated
fw0 at fwohci0:
ff:65:30:00:c0:a3:bb:fe:00:00:ff:ff:f0:01:00:00
fw0: maximum receive packet (2) is too small
wd0 at atabus0 drive 0: <IBM-DJSA-210>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 19485 cyl, 16 head, 63 sec, 512 bytes/sect x
19640880 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
(Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
4 (Ultra/66) (using 
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8174, ,
C113> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!

------------------------------------------------------------
-----------------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Jul 8, 2007, at 07:31, Masafumi Hotta wrote:

> Hello.
>
> I'd like to use current with ibook G3 466MHz with
firewire,
> get the latest source today and tryed to boot the
kernel (cross
> compiled on i386).
>
> But it panics

Hmm.

> panic: cnopen: no console device
> Stopped in pid 16.1 <init> at  
netbsd:cpu_Debugger+0x10:   Lwz   r0,
> r1, 0x14
> db> bt
> 0xd964bcb0: at panic+0x1b4
> 0xd964bd00: at cnopen+0x12c

Which is weird, because:

> wsdisplay0 at ofb0 kbdmux 1: console (std, vt100
emulation)
> wskbd0 at akbd0: console keyboard, using wsdisplay0

What did you change in your kernel config?

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRpTnWspnzkX8Yg2nAQLvdwf/TmvtPv1+tsw9jouObdSr8Tiw+P0b
ZpT5
/C71HepbUAnnV6X3zSKQWozvYoEc9lIlyOneUPLiNEkt1RsEIV9+6Z63Xdcw
Cm4c
UAewlALRm0Y34DA3Nwd6MJe8hOGmoqeOE5A4rXQ6SNN1o8ycveAxrQ17cMAl
SEDK
9MiP0Zajsm8sj3urbSMVUNPjtqala6dRYUoJd/yr7u5WJqoY6HE7nWWdpG3g
36Zc
LTo4nX+CD8Jn/NLWz6diWwzoid+T+38bXr5IuGCq9TbQ9jrXY1qCQrvx7vgF
n50A
7aUW1MpHBpYSwF8TjLdi1Gr/BScliw03Ft0ojqTGAkHpwl31mcjOeQ==
=bfHb
-----END PGP SIGNATURE-----

Hello.
>
>Which is weird, because:
>
>> wsdisplay0 at ofb0 kbdmux 1: console (std, vt100
emulation)
>> wskbd0 at akbd0: console keyboard, using
wsdisplay0
>
>What did you change in your kernel config?
>
Nothing, it is GENERIC kernel.
The same kernel boots fine on powermac G4.

Thanks.
Masafumi Hotta

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Jul 12, 2007, at 11:13, Masafumi Hotta wrote:

> Hello.
>>
>> Which is weird, because:
>>
>>> wsdisplay0 at ofb0 kbdmux 1: console (std,
vt100 emulation)
>>> wskbd0 at akbd0: console keyboard, using
wsdisplay0
>>
>> What did you change in your kernel config?
>>
> Nothing, it is GENERIC kernel.
> The same kernel boots fine on powermac G4.

Hmm, weird.
Please run 'ofctl -p' and mail me the output ( which will be
a dump of 
your OpenFirmware device tree which is - among other things
- used to 
find console devices. We deal with some weirdnesses there
but likely 
didn't catch all )

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRpZXo8pnzkX8Yg2nAQJHCAf/SDlkZzG/IOKs8i9tvbeyzzX9uPn+
Gs3c
kpuT7IR4BYFHmwWQmMfQICTzTiFzWrBUDnAjqcJ5b5oh0JmrEwuNkkUOp+oL
YA4C
sXVKIYxsUCu5c8zXJpnGFQnTtTOrIZuViGanRthmtj0SoUKxRCCcS+Xk846p
3Ugm
vl9hCdNCFjKtU9ONh2PQqoTmmlfO/O3iRzlWtwyZKJvnBl9XGRgiitcgCTFd
tcB9
tSo8R2M0KcL+ZHcjJz1qY0sJocURoVLCjcdrKhTIwOg2hvNE335WPwptTL8d
azlr
8A4b0j2My/dsE0pqIkKnpqWDUSIXjtvUBI05JBvvgGZbQAWWqOrbVQ==
=K3nF
-----END PGP SIGNATURE-----