On Tue, Jun 19, 2007 at 08:53:18PM +0200, Manuel Bouyer
wrote:
> Is the first panic() also a "read_psl() == 0"
one ?
Just a note to confirm that Xen 3.1 hasn't changed the
problem I see
with this KASSERT and HVM (not surprising, since it's the
same dom0
kernel).
I also tried again the same test kernel with this line
commented out
as before, but on the Xen 3.1 hypervisor, just to see if
there was any
observable difference. This time, the HVM started and ran
without
causing the local problem with the X server, but instead the
HVM domU
ran very very slowly. From a limited sample size, I'm not
sure if
this represents a difference because of xen versions, or
just
different test results I would have seen with either
version.
I haven't used a non-HVM domU much (or at all?) since the
3.1 upgrade,
I shall try that when I can to see if that also trips this
issue now.
This is on my laptop during daily work, so running repeated
tests (and
fsck's) has to wait for suitable opportunities.
--
Dan.
|
