Re: Xen/amd64 status

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


On Oct,Monday 22 2007, at 12:11 AM, Manuel Bouyer wrote:

> On Sun, Oct 21, 2007 at 06:42:56PM +0200, Adam Hamsik
wrote:
>> [...]
>>> The xenamd64 kernel is now good enough to
complete a sysinst
>>> install from
>>> xennet to xbd.
>>>
>>
>> Good work, Manuel I'm going to test this kernel.
>
> thanks ! 

this is output from my server, and it works like a charm
.

xena2 netbsd # xm create -c netbsd.xen.cfg
Using config file "./netbsd.xen.cfg".
Started domain netbsd
ksyms_init 0xffffffff80928b70, 0xffffffff80928b78,
0xffffffff80978000
[ Kernel symbol table invalid! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004,  
2005,
     2006, 2007
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All
rights reserved.

NetBSD 4.99.34 (INSTALL_XEN3_DOMU) #138: Sun Oct 21 23:46:31
CEST 2007
         bouyerrock:/dsk/l1/misc/bouyer/current/src/sys-xenamd64/ 
arch/amd64/compile/INSTALL_XEN3_DOMU
total memory = 256 MB
avail memory = 235 MB
mainbus0 (root)
hypervisor0 at mainbus0
vcpu0 at hypervisor0: (uniprocessor)
vcpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+,
2009.14 MHz
vcpu0: 8 page colors
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: using event channel 2
raidattach: Asked for 8 units
Kernelized RAIDframe activated
md0: internal 5000 KB image area
xenbus0: using event channel 1
xbd0 at xenbus0 id 769: Xen Virtual Block Device Interface
unknown type console at xenbus0 id 0 not configured
xbd0: 15360 MB, 512 bytes/sect x 31457280 sectors
Searching for RAID components...
boot device: xbd0
root on md0a dumps on md0b
mountroot: trying ffs...
root file system type: ffs
warning: no /dev/console
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
unknown type console at xenbus0 id 0 not configured
unknown type console at xenbus0 id 0 not configured
Created mfs /dev (412 blocks, 1194 inodes)

Regards

Adam.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)

iD8DBQFHHIS2lIxPgX3Go0MRAnSyAKC83u23SmVz4muatKnn6xYKcxgaRQCf
R1dY
wNlLj/2fCO/93MJ+LLevcf8=
=MAJO
-----END PGP SIGNATURE-----

On Mon, Oct 22, 2007 at 01:08:38PM +0200, Adam Hamsik
wrote:
> 
> this is output from my server, and it works like a
charm .

Cool. How much ram does the physical hardware have ?

-- 
Manuel Bouyer <bouyerantioche.eu.org>
     NetBSD: 26 ans d'experience feront toujours la
difference
--

On Mon, Oct 22, 2007 at 01:08:38PM +0200, Adam Hamsik
wrote:
> this is output from my server, and it works like a
charm .


Is this a 64-bit domU on a 32-bit dom0, or how should I
understand this?


	Geert


> 
> xena2 netbsd # xm create -c netbsd.xen.cfg
> Using config file "./netbsd.xen.cfg".
> Started domain netbsd
> ksyms_init 0xffffffff80928b70, 0xffffffff80928b78,
0xffffffff80978000
> [ Kernel symbol table invalid! ]
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004,  
> 2005,
>     2006, 2007
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All
rights reserved.
> 
> NetBSD 4.99.34 (INSTALL_XEN3_DOMU) #138: Sun Oct 21
23:46:31 CEST 2007
>         bouyerrock:/dsk/l1/misc/bouyer/current/src/sys-xenamd64/ 
> arch/amd64/compile/INSTALL_XEN3_DOMU
> total memory = 256 MB
> avail memory = 235 MB
> mainbus0 (root)
> hypervisor0 at mainbus0
> vcpu0 at hypervisor0: (uniprocessor)
> vcpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+,
2009.14 MHz
> vcpu0: 8 page colors
> xenbus0 at hypervisor0: Xen Virtual Bus Interface
> xencons0 at hypervisor0: Xen Virtual Console Driver
> xencons0: using event channel 2
> raidattach: Asked for 8 units
> Kernelized RAIDframe activated
> md0: internal 5000 KB image area
> xenbus0: using event channel 1
> xbd0 at xenbus0 id 769: Xen Virtual Block Device
Interface
> unknown type console at xenbus0 id 0 not configured
> xbd0: 15360 MB, 512 bytes/sect x 31457280 sectors
> Searching for RAID components...
> boot device: xbd0
> root on md0a dumps on md0b
> mountroot: trying ffs...
> root file system type: ffs
> warning: no /dev/console
> init: copying out flags `-s' 3
> init: copying out path `/sbin/init' 11
> unknown type console at xenbus0 id 0 not configured
> unknown type console at xenbus0 id 0 not configured
> Created mfs /dev (412 blocks, 1194 inodes)
> 
> Regards
> 
> Adam.
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (Darwin)
> 
>
iD8DBQFHHIS2lIxPgX3Go0MRAnSyAKC83u23SmVz4muatKnn6xYKcxgaRQCf
R1dY
> wNlLj/2fCO/93MJ+LLevcf8=
> =MAJO
> -----END PGP SIGNATURE-----