change from eth0 ---- router interface , to ppp0 --- ethernet modem interface

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I finally changed device to connect to internet on my
gateway linux box
, from a netgear router to an ethernet modem device.
Offcourse occourred some changes in my iptables script ,
what before was
192.168.0.2 ip for eth0 and 192.168.0.1 for my front router
now has a
eth0 with no ip and a ethernet router with my dynamic isp ip
i grab with
this script :

> EXTIF=ppp0
> EXTIP="`ifconfig $EXTIF | grep inet | cut -d : -f
2 | cut -d   -f 1`"

- -------
behind my gateway linuxbox (Debian etch) i have two more
servers a mail
server and a web ftp server .Mail is working great with this
iptables:
> ARGO="`ifconfig ppp0 | grep inet | cut -d : -f 2 |
cut -d   -f 1`"
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 25 -j DNAT --to $MAIL:25
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 25 -d
$MAIL -j ACCEPT


I have problems with http e https where i'm using this
code:
> IF0=ppp0
> IF1=eth1
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 80 -j DNAT --to $WWW:80
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 443 -j DNAT --to $WWW:443
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 80 -d
$WWW -j ACCEPT
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 443 -d
$WWW -j ACCEPT

I'm using apache2 with mod_rewrite rewriting connecions from
port 80 to 443.
What's wrong with my configuration ? I will try to remove
that -d $ARGO
like this:
>$IPT -t nat -A PREROUTING -p tcp -i $IF0 --dport 80 -j
DNAT --to $WWW:80
>$IPT -t nat -A PREROUTING -p tcp -i $IF0 --dport 443 -j
DNAT --to $WWW:443
And invite you to give it a try http://www.gabrix.ath.cx
let's see how
it goes.
Thanks for the attenction !
gabriele



-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org


iD8DBQFGwhFnaSnKyogvewwRAhpMAKCsepaqX5XZZpuY7/Zg+cmNwNdtcACf
SAyC
vLmZeFzdXaXnqio8fXXTouo=
=UdWg
-----END PGP SIGNATURE-----

On 08/14/07 15:32, gabrix wrote:
> ARGO="`ifconfig ppp0 | grep inet | cut -d : -f 2 |
cut -d   -f 1`"
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 25 -j DNAT 
> --to $MAIL:25
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 25 -d
$MAIL -j ACCEPT
> 
> I have problems with http e https where i'm using this
code:
> 
> IF0=ppp0
> IF1=eth1
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 80 -j DNAT 
> --to $WWW:80
> $IPT -t nat -A PREROUTING -p tcp -i $IF0 -d $ARGO
--dport 443 -j DNAT 
> --to $WWW:443
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 80 -d
$WWW -j ACCEPT
> $IPT -A FORWARD -i $IF0 -o $IF1 -p tcp --dport 443 -d
$WWW -j ACCEPT

I do not see any thing wrong with the IPTables rules that
you have
presented.  However apparently something else is preventing
things from
working correctly.

> I'm using apache2 with mod_rewrite rewriting connecions
from port 80 
> to 443.  What's wrong with my configuration ? I will
try to remove 
> that -d $ARGO like this:

I am curious if you see any traffic comming in to your web
server at
all, be it via netstat, TCPDump, logs, etc.

I also wonder what else may be in your IPTables rules that
is not
presented that may be causing problems.  Can / will you do
an
iptables-save and show us the output of your entire IPTables
configuration?

> And invite you to give it a try http://www.gabrix.ath.cx
let's see 
> how it goes.
> 
> Thanks for the attenction !

*nod*



Grant. . . .