Barry,
I think I've cheched just about everything. The details
I've
copied in at the bottom of this and next mail (chapter 2),
is cut from the bottom of Status --> Advanced UI.
All g_mirror... settings from mirror.htm are in the .ini
and
appear to be correct.
I'm sure this stuff is supposed to work, only I haven't
found out how, just yet. So any assistance on the way is
highly appreciated...
Best regards,
Robert
----- Original Message -----
From: <webmaster 1usa.com>
To: <surgemail-listnetwinsite.com>
Subject: Re: [SurgeMail List] Surgemail Mirror Setup
Date: Wed, 28 Nov 2007 22:19:50 -0500
> 1. Goto the Status page (left menu) click on Advanced.
> Goto very bottom of page. The last section will
display
> Mirror In and Mirror Out details.
>
> 2. h
ttp://www.netwinsite.com/surgemail/help/mirror.htm is
> accurate. Don't read too much into it. In the Find
box
> (top left corner) type in g_mirror to see the
various
> mirroring settings... you don't need to edit the ini
files
> manually other than intially copying the surgemail.ini
> file over to the 2nd machine. Actually, no reboot is
> necessary.
>
>
>
> BarryZ
> 1USA
>
> ----- Original Message -----
> From: Robert Hercz
> To: surgemail-listnetwinsite.com
> Sent: Wednesday, November 28, 2007 2:02 PM
> Subject: [SurgeMail List] Surgemail Mirror Setup
>
>
> Hi,
>
> I'm trying to set up a SurgeMail mirror server. I have
> followed the docs found on
> h
ttp://www.netwinsite.com/surgemail/help/mirror.htm, and
> have installed vanilla download, run the install and
> answered the standard questions. I then copied
> surgemail.ini from the old master over to c:windows
> (where the new install placed its surgemail.ini).
>
> I then edited INI files on both servers, removed the
> 'g_mirror_mode "DISABLED"' from them both,
and added
> g_mirror_nossl, g_mirror_host, g_mirror_secret and
> g_mirror_config according to the docs. The
g_mirror_host
> setting point to each others IP addresses. They ping
each
> other without problems.
>
> I then shut down both SurgeMail servers, rebooted just
to
> be safe, and issued the tellmail commands described in
the
> docs
>
> tellmail resync_config
> tellmail surgehost_update
> tellmail resync_nwauth
> tellmail resync_fast
>
> The Status screens on the servers display the info
copied
> below.
>
> I'd appreciate if someone could tell me if there is
> anything I have missed, a setting which isn't specified
in
> the mirror setup docs on NetWinSite's web, or what I
> should do to get this working.
>
> Bestr regards,
> Robert
>
> +-- Master ----
>
> Mirror out: -ERR Unknown command, try again. Que/sent
> add=12/0 (0 bytes) del=0/0 ren=3/0/0 qfile=0k -ERR
Unknown
> command, try again. 19:54 -ERR Unknown command, try
again.
> Open failed
> State: Started 1
> Upto 0/-1 0.0%
> Adding to que: 13 0.0/s (reque=0)
> Sending to rmt: 0 0.0/s
> Sent live: 0 0.0/s (0 chans busy)
> Gone before sent=0, Getlost ok=0, missing=0
> Mirror in: Received add=0 del=0 rename=0 fail=0
delfail=0
> renfail=0 p=0
>
> Memory Blocks (155679) 17mb/18mb simple 0 0k, keep
6644k,
> stack 33k, tcp 203k
> Big mem blocks: 352k used, 672k total Rcpt 6
> Mfilter: fast=0, body=0, head=0, decode=0, total=0,
> nact=58 nc=0 0 NDB: using original maildir format
> spawn_mutex at line 136 first=0 last=146 n=0 thid=-1
>
> SSL/TLS Encryption is supported (OpenSSL 0.9.7k 05 Sep
> 2006), Allow=* Expired 0/0 ndir=0 items 0k/0k
19937934min
> No license send limit
>
>
> +-- Slave ----
>
> Mirror out: NoSSL Que/sent add=0/0 (0 bytes) del=0/0
> ren=0/0/0 qfile=0k -ERR cluster password invalid 19:57
> -ERR cluster password invalid
> State: Started 1
> Upto 0/-1 0.0%
> Adding to que: 1 0.0/s (reque=0)
> Sending to rmt: 0 0.0/s
> Sent live: 0 0.0/s (0 chans busy)
> Gone before sent=0, Getlost ok=0, missing=0
> Mirror in: Received add=0 del=0 rename=0 fail=0
delfail=0
> renfail=0 p=0
>
> Memory Blocks (128216) 11mb/12mb simple 0 0k, keep
2121k,
> stack 6k, tcp 213k
> Big mem blocks: 320k used, 480k total Rcpt 0
> Mfilter: fast=0, body=0, head=0, decode=0, total=0,
nact=0
> nc=0 0 NDB: using original maildir format
> spawn_mutex at line 136 first=0 last=146 n=0 thid=-1
>
> SSL/TLS Encryption is supported (OpenSSL 0.9.7k 05 Sep
> 2006), Allow=* Expired 0/0 ndir=0 items 0k/0k
19937937min
> No license send limit
>
>
>
>
>
>
>
>
>
|
