Surgemail Mirror Setup - Can't get it to work

Hi,

 

I am having problems getting a mirror setup to work. I have checked and rechecked configuration: All seems to be correct. For some reason, the Master is displaying “-ERR Unknown command, try again̶1; messages in the Status screen.

 

Has anyone else had similar experiences and/or tips on what I should do to make this work?

 

Best regards,

Robert

 

 

Hi Barry,

 

Thanks for willingness to help. I’ve double-checked, and can confirm that:

 

           ; g_mirror_mode: ;        ;    .ini A = “MASTER̶1;, .ini B = “SLAVE”

           ; g_mirror_host: ;        ;      .ini A = x.x.x.3, ini B = x.x.x.2 (thus pointing to each other)

           ; g_mirror_secret:        ;    .ini A = “mysecretpassword”, .ini B = “mysecretpassword”; (i.e. identical)

           ; No SSL

 

Btw: Both servers are fully licensed.

           ;

This is kinda why IR17;m puzzled why the Master says it’s commands are illegal (se bottom of this mail) “-ERR Unknown
command, try again. -ERR Unknown command, try again.”

 

Regards,

Robert

 

 

Barry,

I think I've cheched just about everything. The details I've
copied in at the bottom of this and next mail (chapter 2),
is cut from the bottom of Status --> Advanced UI.
All g_mirror... settings from mirror.htm are in the .ini and
appear to be correct.

I'm sure this stuff is supposed to work, only I haven't
found out how, just yet. So any assistance on the way is
highly appreciated...

Best regards,
Robert

----- Original Message -----

From: < webmaster1usa.com">webmaster1usa.com&gt;
To: < surgemail-listnetwinsite.com">surgemail-listnetwinsite.com>
Subject: Re: [SurgeMail List] Surgemail Mirror Setup
Date: Wed, 28 Nov 2007 22:19:50 -0500

> 1. Goto the Status page (left menu) click on Advanced.
> Goto very bottom of page. ; The last section will display
> Mirror In and Mirror Out details.
>
> 2.  http://www.netwinsite.com/surgemail/help/mirror.htm is
> accurate.&nbsp; Don't read too much into it. In the Find box
> (top left corner) type in g_mirror&nbsp;  to see the various
> mirroring settings... you don't need to edit the ini files
&gt; manually other than intially copying the surgemail.ini
> file over to the 2nd machine.&nbsp; Actually, no reboot is
> necessary.
>
>
>
> BarryZ
&gt; 1USA
>;
> ----- Original Message -----
> From: Robert Hercz
> To: surgemail-listnetwinsite.com">surgemail-listnetwinsite.com
&gt; Sent: Wednesday, November 28, 2007 2:02 PM
> Subject: [SurgeMail List] Surgemail Mirror Setup
&gt;
>
> Hi,
>
> I'm trying to set up a SurgeMail mirror server. I have
>; followed the docs found on
> http://www.netwinsite.com/surgemail/help/mirror.htm, and
> have installed vanilla download, run the install and
> answered the standard questions. I then copied
&gt; surgemail.ini from the old master over to c:windows
> (where the new install placed its surgemail.ini).
>;
> I then edited INI files on both servers, removed the
> 'g_mirror_mode "DISABLED"' from them both, and added
&gt; g_mirror_nossl, g_mirror_host, g_mirror_secret and
> g_mirror_config according to the docs. The g_mirror_host
> setting point to each others IP addresses. They ping each
>; other without problems.
>
> I then shut down both SurgeMail servers, rebooted just to
> be safe, and issued the tellmail commands described in the
> docs
>;
> tellmail resync_config
> tellmail surgehost_update
&gt; tellmail resync_nwauth
> tellmail resync_fast
>
> The Status screens on the servers display the info copied
&gt; below.
>
> I'd appreciate if someone could tell me if there is
> anything I have missed, a setting which isn't specified in
> the mirror setup docs on NetWinSite's web, or what I
> should do to get this working.
>
> Bestr regards,
> Robert
&gt;
> +-- Master ----
>;
> Mirror out: -ERR Unknown command, try again. Que/sent
> add=12/0 (0 bytes) del=0/0 ren=3/0/0 qfile=0k -ERR Unknown
> command, try again. 19:54 -ERR Unknown command, try again.
&gt; &nbsp; Open failed
&gt; &nbsp; State: Started 1
>&nbsp;  Upto 0/-1 0.0%
>&nbsp;  Adding to que:  13 0.0/s (reque=0)
>&nbsp;  Sending to rmt: 0 0.0/s
>&nbsp;  Sent live: ; &nbsp; &nbsp; 0 0.0/s (0 chans busy)
>&nbsp;  Gone before sent=0, Getlost ok=0, missing=0
> Mirror&nbsp; in: Received add=0 del=0 rename=0 fail=0 delfail=0
> renfail=0 p=0
>
> Memory Blocks (155679) 17mb/18mb&nbsp; simple 0 0k, keep 6644k,
&gt; stack 33k, tcp 203k
>; Big mem blocks: 352k used, ;  672k total Rcpt 6
> Mfilter: fast=0, body=0, head=0, decode=0, total=0,
> nact=58 nc=0 0 NDB: using original maildir format
&gt; spawn_mutex at line 136 first=0 last=146 n=0 thid=-1
>
> SSL/TLS Encryption is supported (OpenSSL 0.9.7k 05 Sep
> 2006), Allow=* Expired 0/0 ndir=0 items 0k/0k ; 19937934min
> No license send limit
&gt;
>
> +-- Slave ----
>;
> Mirror out: NoSSL Que/sent add=0/0 (0 bytes) del=0/0
> ren=0/0/0 qfile=0k -ERR cluster password invalid 19:57
&gt; -ERR cluster password invalid
> &nbsp; State: Started 1
>&nbsp;  Upto 0/-1 0.0%
>&nbsp;  Adding to que:  1 0.0/s (reque=0)
>&nbsp;  Sending to rmt: 0 0.0/s
>&nbsp;  Sent live: ; &nbsp; &nbsp; 0 0.0/s (0 chans busy)
>&nbsp;  Gone before sent=0, Getlost ok=0, missing=0
> Mirror&nbsp; in: Received add=0 del=0 rename=0 fail=0 delfail=0
> renfail=0 p=0
>
> Memory Blocks (128216) 11mb/12mb&nbsp; simple 0 0k, keep 2121k,
&gt; stack 6k, tcp 213k
>; Big mem blocks: 320k used, ;  480k total Rcpt 0
> Mfilter: fast=0, body=0, head=0, decode=0, total=0, nact=0
&gt; nc=0 0 NDB: using original maildir format
&gt; spawn_mutex at line 136 first=0 last=146 n=0 thid=-1
>
> SSL/TLS Encryption is supported (OpenSSL 0.9.7k 05 Sep
> 2006), Allow=* Expired 0/0 ndir=0 items 0k/0k ; 19937937min
> No license send limit
&gt;
>
>
>
>
>
>
>
>