hi misc ,
i'm working on getting the sensors' output into some nice
graphs;
however, having a look at their output now and then, i get
some strange
values:
hw.sensors.acpitz0.temp0=40.05 degC (zone temperature)
hw.sensors.it0.temp0=28.00 degC
hw.sensors.it0.temp1=37.00 degC
hw.sensors.it0.temp2=25.00 degC
hw.sensors.it0.fan0=10546 RPM
(here the fan is obviously much too fast; occasionally i see
>25.000RPM)
seconds later:
hw.sensors.acpitz0.temp0=40.05 degC (zone temperature)
hw.sensors.it0.temp0=7.00 degC
hw.sensors.it0.temp1=34.00 degC
hw.sensors.it0.temp2=24.00 degC
hw.sensors.it0.fan0=2636 RPM
(there temp0 is far too low; fan is okay)
dmesg below; this machine idles around almost all of its
time, doing
some mail server stuff for a small site -- that's all.
some hints (or a single, problem-solving one ;) very much
appreciated.
thanks,
timo
ps: this happens running very recent -current from yesterday
as well as
running 4.1-RELEASE...
---
OpenBSD 4.1-current (GENERIC) #0: Thu Jul 5 20:44:48 CEST
2007
root zoidberg.riscworks.net:/usr/src/sys/arch/amd64/compil
e/GENERIC
real mem = 1055444992 (1006MB)
avail mem = 1013592064 (966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 0xf0000 (70 entries)
bios0: ASUSTek Computer INC. M2NPV-VM
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP SSDT MCFG APIC
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (HUB0)
acpicpu0 at acpi0 PSS
acpicpu1 at acpi0
acpitz0 at acpi0, critical temperature: 75 degC
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2204.94 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXS
R,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way
D-cache, 512KB
64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully
associative, 8
4MB entries fully associative cpu0: DTLB 32 4KB entries
fully
associative, 8 4MB entries fully associative cpu0: PowerNow!
K8 2204
MHz: speeds: 2200 2000 1800 1000 MHz pci0 at mainbus0 bus
0:
configuration mode 1 "NVIDIA C51 Host" rev 0xa2 at
pci0 dev 0 function
0 not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 1
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 2
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 3
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 4
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 5
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 6
not configured "NVIDIA C51 Memory" rev 0xa2 at
pci0 dev 0 function 7
not configured ppb0 at pci0 dev 2 function 0 "NVIDIA
C51 PCIE" rev 0xa1
pci1 at ppb0 bus 1 ppb1 at pci0 dev 3 function 0
"NVIDIA C51 PCIE" rev
0xa1 pci2 at ppb1 bus 2
ppb2 at pci0 dev 4 function 0 "NVIDIA C51 PCIE"
rev 0xa1
pci3 at ppb2 bus 3
vga1 at pci0 dev 5 function 0 "NVIDIA GeForce
6150" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"NVIDIA MCP51 Host" rev 0xa2 at pci0 dev 9
function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP51 ISA"
rev 0xa3
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP51
SMBus" rev 0xa3
iic0 at nviic0
iic1 at nviic0
"NVIDIA MCP51 Memory" rev 0xa3 at pci0 dev 10
function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP51 USB"
rev 0xa3: irq 5,
version 1.0, legacy support ehci0 at pci0 dev 11 function 1
"NVIDIA
MCP51 USB" rev 0xa3: irq 11 usb0 at ehci0: USB revision
2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP51
IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured
to
compatibility atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at
atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0:
<_NEC, DVD_RW
ND-4570A, 1.02> SCSI0 5/cdrom removable cd0(pciide0:0:0):
using PIO
mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no
drives)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP51
SATA" rev 0xa1: DMA
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC
WD2500YD-01NVB1>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 15 function 0 "NVIDIA MCP51
SATA" rev 0xa1: DMA
pciide2: using irq 10 for native-PCI interrupt
ppb3 at pci0 dev 16 function 0 "NVIDIA MCP51
PCI-PCI" rev 0xa2
pci4 at ppb3 bus 4
"TI TSB43AB22 FireWire" rev 0x00 at pci4 dev 5
function 0 not configured
pciide3 at pci4 dev 8 function 0 "Promise
PDC40718" rev 0x02: DMA
wd1 at pciide3 channel 3 drive 0: <WDC
WD2500YD-01NVB1>
wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd1(pciide3:3:0): using BIOS timings, Ultra-DMA mode 6
pciide3: using irq 5 for native-PCI interrupt
fxp0 at pci4 dev 9 function 0 "Intel 8255x" rev
0x0c, i82550: irq 11,
address 00:02:b3:8e:29:83 inphy0 at fxp0 phy 1: i82555
10/100 PHY, rev.
4 pchb0 at pci0 dev 24 function 0 "AMD AMD64
HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address
Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM
Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc
Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub2 at uhub0 port 5: Prolific Technology Inc. USB Embedded
Hub, rev
2.00/1.00, addr 2 umass0 at uhub2 port 1 configuration 1
interface 0
umass0: Prolific Technology Inc. USB Mass Storage Device,
rev
2.00/1.00, addr 3 umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Corsair, Flash Voyager,
1.00> SCSI0
0/direct removable sd0: 3912MB, 498 cyl, 255 head, 63 sec,
512
bytes/sec, 8011776 sec total uhub3 at uhub1 port 2: Alps
Electric Hub
in Apple USB Keyboard, rev 1.10/2.10, addr 2 uhidev0 at
uhub3 port 1
configuration 1 interface 0 uhidev0: Alps Electric Apple USB
Keyboard,
rev 1.10/1.03, addr 3, iclass 3/1 ukbd0 at uhidev0: 8
modifier keys, 6
key codes, country code 13 wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
new disklabel raw disk size different 490234689 !=
490234752
new disklabel raw disk offset different 63 != 0
dkcsum: wd0 matches BIOS drive 0x80
new disklabel raw disk size different 490234689 !=
490234752
new disklabel raw disk offset different 63 != 0
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: sd0 matches BIOS drive 0x82
root on wd0a swap on wd0b dump on wd0b
uhub2: at uhub0 port 5 (addr 2) disconnected
umass0: at uhub2 port 1 (addr 3) disconnected
sd0 detached
scsibus1 detached
umass0 detached
uhub2 detached
|