openbsd on root-server?

This is the same like the wiki.bsd-crew Howto (Dettus) from
my initial
mail. I tried 3 different Howtos (including the
depenguinator) and lots
of ideas i had, all with the same result: "Booting
from Disk..." and
then nothing more. I'm quite sure that the kernel does not
boot and some
posts i found confirm this, as Strato appears to have new
Systems which
seem to have a Bios bug (but that's still unconfirmed, i'm
waiting for a
reply from the Strato technicians)

Or does anybody here have OpenBSD(3.5||3.8) /
FreeBSD(5.2||5.4) running
on this hardware?

rooth237399:~# lspci
00:01.0 PCI bridge: ServerWorks: Unknown device 0036
00:02.0 Host bridge: ServerWorks: Unknown device 0205
00:02.2 ISA bridge: ServerWorks: Unknown device 0234
00:03.0 USB Controller: ServerWorks: Unknown device 0223
(rev 01)
00:03.1 USB Controller: ServerWorks: Unknown device 0223
(rev 01)
00:03.2 USB Controller: ServerWorks: Unknown device 0223
(rev 01)
00:05.0 VGA compatible controller: ATI Technologies Inc Rage
XL (rev 27)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
01:0d.0 PCI bridge: ServerWorks: Unknown device 0104 (rev
b2)
01:0e.0 RAID bus controller: ServerWorks: Unknown device
0240
02:03.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5704
Gigabit Ethernet (rev 10)
02:03.1 Ethernet controller: Broadcom Corporation NetXtreme
BCM5704
Gigabit Ethernet (rev 10)

rooth237399:~# cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 39
model name      : AMD Opteron(tm) Processor 146
stepping        : 1
cpu MHz         : 1996.283
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic
sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx
mmxext lm
3dnowext 3dnow pni
bogomips        : 3932.16

Greets, Chris

PS. Doing the same steps (from each Howto) and run the image
inside a
Vmware works like a charm, so i'm quite sure i'm not
totally over sleep ;)


Holger Mauermann wrote:

>Christian Pedaschus wrote:
>  
>
>>i'm trying since a few hours to get 3.8 on a
(linux-based) root-server,
>>without success. I googled some tutorials (for ex.
>>http://wiki.bsd-crew.de/inde
x.php?title=Strato-Rootserver_mit_NetBSD&redirect=no
)
>>but they don't seem to work
>>...
>>Anybody got a better way or a tutorial i missed?
>>    
>>
>
>See here: http://w
ww.dettus.net/openbsd_at_strato.txt. However, I
>haven't tried that and it's a little bit outdated...
>
>Holger