Sensors at PowerMac Cube

On 2006-05-30 17:43:19 +0200, Xavier Santolaria
<xaviersantolaria.net> said:

> first of all, send a complete dmesg please.
> xsa.

Here you are:

[ using 338996 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pd]console in [keyboard] no keyboard
found, 
hoping USB will be present
: memaddr 94000000 size 4000000, : consaddr 96008000, :
ioaddr 
90020000, size 20000: memtag 8000, iotag 8000: width 640
linebytes 768 
height 480 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All
rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9 (GENERIC) #853: Tue Feb 28 22:42:40 MST 2006
    deraadtmacppc.openbsd.org:/usr/src/sys/arch/macppc/compile/G
ENERIC
real mem = 794820608 (776192K)
avail mem = 727564288 (710512K)
using 1254 buffers containing 39739392 bytes (38808K) of
memory
mainbus0 (root): model PowerMac5,1
cpu0 at mainbus0: 7400 (Revision 0x209): 450 MHz: 1MB
backside cache
memc0 at mainbus0: uni-n
ki2c0 at memc0 offset 0xf8001000
iic0 at ki2c0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N
AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage Fury"
rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x16
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N"
rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple
Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
"programmer-switch" at macgpio0 not configured
"i2s" at macobio0 offset 0x10000 not configured
"escc-legacy" at macobio0 offset 0x12000 not
configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
"timer" at macobio0 offset 0x15000 not
configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x9, 0% charged
ki2c1 at macobio0 offset 0x18000
iic1 at ki2c1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <WDC WD307AA-00BAA0>
wd0: 16-sector PIO, LBA, 29333MB, 60074784 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8186,
F113> SCSI0 
5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode
2
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev
0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev
0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Texas Instruments TSB12LV26 FireWire" rev 0x00
at pci1 dev 26 function 
0 not configured
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N
Eth" rev 0x00
gem0 at pci2 dev 15 function 0 "Apple Uni-N
GMAC" rev 0x01: irq 41, 
address 00:30:65:c1:94:3a
lxtphy0 at gem0 phy 0: LXT971 10/100 PHY, rev. 1
bootpath: '/pcif2000000/mac-io17/ata-41f000/disk0/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02