|
List Info
Thread: Dell T105 - Opteron 1210 1.8ghz DMESG
|
|
| Dell T105 - Opteron 1210 1.8ghz DMESG |
|
2008-03-07 09:34:36 |
Howdy,
I know that the website states dmesgs for systems running
bsd.mp would be
appreciated. This is my dmesg from a dell t105, the onboard
network card is
turned off, I'm getting kernel panics with it on, so I'm
currently working
that issue. Here's my dmesg:
-bash-3.2$ dmesg
OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT
2007
deraadt amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GEN
ERIC.MP
real mem = 535351296 (510MB)
avail mem = 508305408 (484MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 0xf0cd0 (47 entries)
bios0: vendor Dell Inc. version "1.0.1" date
09/17/2007
bios0: Dell Inc. PowerEdge T105
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 1210, 1808.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW
2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way
D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries
fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries
fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 1210, 1808.34 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW
2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way
D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries
fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries
fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24
pins
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa4 at pci0 dev 0
function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4
ISA" rev 0xf1
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4
SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4
USB" rev 0xa2: apic 2 int 11
(irq 11), version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4
USB" rev 0xa4: apic 2 int 10
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 7 function 0 "NVIDIA nForce4
SATA" rev 0xf3: DMA
pciide0: using apic 2 int 10 (irq 10) for native-PCI
interrupt
wd0 at pciide0 channel 0 drive 0: <WDC
WD800AAJS-18TDA1>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 8 function 0 "NVIDIA nForce4
SATA" rev 0xf3: DMA
pciide1: using apic 2 int 11 (irq 11) for native-PCI
interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDRH20N,
0D04> SCSI0
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4
PCI-PCI" rev 0xf2
pci1 at ppb0 bus 1
xl0 at pci1 dev 7 function 0 "3Com 3c905C
100Base-TX" rev 0x6c: apic 2 int
12 (irq 12), address 00:50:da:1a:af:c8
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 4
vga1 at pci1 dev 8 function 0 "ATI ES1000" rev
0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4
PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64
HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address
Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM
Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc
Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhidev0 at uhub1 port 7 configuration 1 interface 0
uhidev0: Cherry Mikroschalter Das Keyboard, rev 2.00/0.26,
addr 2, iclass
3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
-Jonathan Lindsey
Network Engineer
3D Research Corporation
[demime 1.01d removed an attachment of type
application/x-pkcs7-signature which had a name of
smime.p7s]
|
|
| Re: Dell T105 - Opteron 1210 1.8ghz
DMESG |
|
2008-03-07 10:01:45 |
Yeah I am working on this issue actually since I got that
same machine.
It basically comes down to bad interrupt routing combined
with some
crappy AML. I'd still love to see your dmesg to make sure
it is the
same I am seeing.
On Fri, Mar 07, 2008 at 09:34:36AM -0600, Jonathan Lindsey
wrote:
> Howdy,
>
> I know that the website states dmesgs for systems
running bsd.mp would be
> appreciated. This is my dmesg from a dell t105, the
onboard network card is
> turned off, I'm getting kernel panics with it on, so
I'm currently working
> that issue. Here's my dmesg:
>
> -bash-3.2$ dmesg
>
> OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT
2007
>
> deraadtamd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GEN
ERIC.MP
>
> real mem = 535351296 (510MB)
>
> avail mem = 508305408 (484MB)
>
> mainbus0 at root
>
> bios0 at mainbus0: SMBIOS rev. 2.5 0xf0cd0
(47 entries)
>
> bios0: vendor Dell Inc. version "1.0.1" date
09/17/2007
>
> bios0: Dell Inc. PowerEdge T105
>
> acpi at mainbus0 not configured
>
> mainbus0: Intel MP Specification (Version 1.4)
>
> cpu0 at mainbus0: apid 0 (boot processor)
>
> cpu0: Dual-Core AMD Opteron(tm) Processor 1210, 1808.54
MHz
>
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CFLU
>
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW
2,3DNOW
>
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way
D-cache, 1MB 64b/line
> 16-way L2 cache
>
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB
entries fully associative
>
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB
entries fully associative
>
> cpu0: apic clock running at 200MHz
>
> cpu1 at mainbus0: apid 1 (application processor)
>
> cpu1: Dual-Core AMD Opteron(tm) Processor 1210, 1808.34
MHz
>
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,PAT,PSE36,CFLU
>
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW
2,3DNOW
>
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way
D-cache, 1MB 64b/line
> 16-way L2 cache
>
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB
entries fully associative
>
> cpu1: DTLB 32 4KB entries fully associative, 8 4MB
entries fully associative
>
> mpbios: bus 0 is type PCI
>
> mpbios: bus 1 is type PCI
>
> mpbios: bus 2 is type ISA
>
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11,
24 pins
>
> pci0 at mainbus0 bus 0: configuration mode 1
>
> "NVIDIA nForce4 DDR" rev 0xa4 at pci0 dev 0
function 0 not configured
>
> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4
ISA" rev 0xf1
>
> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4
SMBus" rev 0xa2
>
> iic0 at nviic0
>
> iic1 at nviic0
>
> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4
USB" rev 0xa2: apic 2 int 11
> (irq 11), version 1.0, legacy support
>
> ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4
USB" rev 0xa4: apic 2 int 10
> (irq 10)
>
> usb0 at ehci0: USB revision 2.0
>
> uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00,
addr 1
>
> pciide0 at pci0 dev 7 function 0 "NVIDIA nForce4
SATA" rev 0xf3: DMA
>
> pciide0: using apic 2 int 10 (irq 10) for native-PCI
interrupt
>
> wd0 at pciide0 channel 0 drive 0: <WDC
WD800AAJS-18TDA1>
>
> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
>
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>
> pciide1 at pci0 dev 8 function 0 "NVIDIA nForce4
SATA" rev 0xf3: DMA
>
> pciide1: using apic 2 int 11 (irq 11) for native-PCI
interrupt
>
> atapiscsi0 at pciide1 channel 0 drive 0
>
> scsibus0 at atapiscsi0: 2 targets
>
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM
GDRH20N, 0D04> SCSI0
> 5/cdrom removable
>
> cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
>
> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4
PCI-PCI" rev 0xf2
>
> pci1 at ppb0 bus 1
>
> xl0 at pci1 dev 7 function 0 "3Com 3c905C
100Base-TX" rev 0x6c: apic 2 int
> 12 (irq 12), address 00:50:da:1a:af:c8
>
> bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY,
rev. 4
>
> vga1 at pci1 dev 8 function 0 "ATI ES1000"
rev 0x02
>
> wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
>
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>
> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
>
> pci2 at ppb1 bus 2
>
> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
>
> pci3 at ppb2 bus 3
>
> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4
PCIE" rev 0xf3
>
> pci4 at ppb3 bus 4
>
> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4
PCIE" rev 0xa3
>
> pci5 at ppb4 bus 5
>
> pchb0 at pci0 dev 24 function 0 "AMD AMD64
HyperTransport" rev 0x00
>
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address
Map" rev 0x00
>
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM
Cfg" rev 0x00
>
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc
Cfg" rev 0x00
>
> isa0 at pcib0
>
> isadma0 at isa0
>
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
>
> pckbc0 at isa0 port 0x60/5
>
> pckbd0 at pckbc0 (kbd slot)
>
> pckbc0: using irq 1 for kbd slot
>
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>
> pcppi0 at isa0 port 0x61
>
> midi0 at pcppi0: <PC speaker>
>
> spkr0 at pcppi0
>
> usb1 at ohci0: USB revision 1.0
>
> uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00,
addr 1
>
> uhidev0 at uhub1 port 7 configuration 1 interface 0
>
> uhidev0: Cherry Mikroschalter Das Keyboard, rev
2.00/0.26, addr 2, iclass
> 3/1
>
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
>
> wskbd1 at ukbd0 mux 1
>
> wskbd1: connecting to wsdisplay0
>
> dkcsum: wd0 matches BIOS drive 0x80
>
> root on wd0a swap on wd0b dump on wd0b
>
>
>
> -Jonathan Lindsey
>
> Network Engineer
>
> 3D Research Corporation
>
> [demime 1.01d removed an attachment of type
application/x-pkcs7-signature which had a name of
smime.p7s]
|
|
[1-2]
|
|