Re: HP 9000 K200 (819) ... Headway made!!!

> Date: Thu, 20 Dec 2007 16:48:32 -0500 (EST)
> From: Rob Sciuk <robcontrolq.com>
> 
> On Thu, 20 Dec 2007, Eric Schnoebelen wrote:
> 
> > Date: Thu, 20 Dec 2007 15:42:08 -0600
> > From: Eric Schnoebelen <ericcirr.com>
> > To: hppaopenbsd.org
> > Subject: Re: HP 9000 K200 (819) ... Headway
made!!! 
> > 
> > Any chance you can get it booted into HP-UX, and
run ioscan(1m)?
> >
> > ``ioscan -f'' would provide useful information
about the disks
> > that are attached.
> 
> I will do.  The HPUX boot currently takes about 30-50
min owing to
> a misconfigured network ... so it'll be about an hour
to get you the
> ioscan -f  stand by.

So the stuff is really there, and the interesting bits are
behind the
same uturn(4) as all the other stuff.

I just noticed another bit of bus scanning code in Linux. 
There's a
new bsd.lif for you to try ;).

Mark