Re: Compiling OpenSSH/OpenSC

Yep that works for me as well.
I compiled in Cygwin
Moved them over to VISTA SP1 into the directory with the
cygwin DLL's and I am happily talking to the Aladdin token.

NICE!
--
DAn

      -----Original Message-----
      From: opensc-user-bounceslists.opensc-project.org
[mailto:opensc-
      user-bounceslists.opensc-project.org] On Behalf Of Dan
Peterson
      Sent: Wednesday, March 19, 2008 2:48 PM
      To: 'Alon Bar-Lev'
      Cc: opensc-userlists.opensc-project.org
      Subject: Re: [opensc-user] Compiling OpenSSH/OpenSC
      
      Cool. I am about to compile...
      --
      Dan
      
            -----Original Message-----
            From: Alon Bar-Lev [mailto:alon.barlevgmail.com]
            Sent: Wednesday, March 19, 2008 1:56 PM
            To: drpetersones.net
            Cc: opensc-userlists.opensc-project.org
            Subject: Re: [opensc-user] Compiling
OpenSSH/OpenSC
      
            Just checked it out using the new cygwin
environment 
            I don't have an OpenSC card, but looks like it
is working!!!
            Just remember that the provider is
opensc-pkcs11.dll and not
            opensc-pkcs11.so.
      
            Alon.
      
            On 3/19/08, Alon Bar-Lev <alon.barlevgmail.com> wrote:
            > On 3/19/08, Dan Peterson <drpetersones.net> wrote:
            >
            > >  When I tried to compile opensc it
compiled fine; and
      would run
            but could never see the card reader I needed the
openct or
      (?)pscs-
            lite and that would not compile. So I had to
abandon opensc
      under
            cygwin.
            >
            >
            > ‏You can try to compile OpenSC trunk, it
should work, I've
            prepared
            >  updated tarball at [1].
            >
            >  ./configure --enable-pcsc
            >  make install
            >
            >  Alon.
            >
            >  [1] htt
p://alon.barlev.googlepages.com/opensc-0.11.4-
      svn.tar.gz
            >



_______________________________________________
opensc-user mailing list
opensc-userlists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-
user

Okay wait....
When I compiled the opensc it never created the
opensc-pkcs11.dll
So I am using it from the SCB installation. Is this
expected?

The /usr/local/bin directory has:
   57926 Mar 19 16:07 cardos-info.exe
  133340 Mar 19 16:07 cryptoflex-tool.exe
 1575841 Mar 19 16:03 cygopensc-2.dll
  461988 Mar 19 16:04 cygpkcs15init-2.dll
   65832 Mar 19 16:01 cygscconf-2.dll
   63550 Mar 19 16:07 eidenv.exe
  102464 Mar 19 16:07 netkey-tool.exe
    1972 Mar 19 16:01 opensc-config
  121483 Mar 19 16:06 opensc-explorer.exe
   77455 Mar 19 16:06 opensc-tool.exe
  109085 Mar 19 16:07 piv-tool.exe
  268750 Mar 19 16:07 pkcs11-tool.exe
   92088 Mar 19 16:07 pkcs15-crypt.exe
  203795 Mar 19 16:07 pkcs15-init.exe
  117372 Mar 19 16:06 pkcs15-tool.exe
  75714 Mar 19 16:07 rutoken-tool.exe      

--
Dan

	-----Original Message-----
      From: Dan Peterson [mailto:drpetersones.net]
      Sent: Wednesday, March 19, 2008 4:28 PM
      To: drpetersones.net; 'Alon Bar-Lev'
      Cc: opensc-userlists.opensc-project.org
      Subject: RE: [opensc-user] Compiling OpenSSH/OpenSC
      
      Yep that works for me as well.
      I compiled in Cygwin
      Moved them over to VISTA SP1 into the directory with
the cygwin
      DLL's and I am happily talking to the Aladdin token.
      
      NICE!
      --
      DAn
      
            -----Original Message-----
            From: opensc-user-bounceslists.opensc-project.org
      [mailto:opensc-
            user-bounceslists.opensc-project.org]
On Behalf Of Dan
      Peterson
            Sent: Wednesday, March 19, 2008 2:48 PM
            To: 'Alon Bar-Lev'
            Cc: opensc-userlists.opensc-project.org
            Subject: Re: [opensc-user] Compiling
OpenSSH/OpenSC
      
            Cool. I am about to compile...
            --
            Dan
      
                  -----Original Message-----
                  From: Alon Bar-Lev [mailto:alon.barlevgmail.com]
                  Sent: Wednesday, March 19, 2008 1:56 PM
                  To: drpetersones.net
                  Cc: opensc-userlists.opensc-project.org
                  Subject: Re: [opensc-user] Compiling
OpenSSH/OpenSC
      
                  Just checked it out using the new cygwin
environment 
                  I don't have an OpenSC card, but looks
like it is
      working!!!
                  Just remember that the provider is
opensc-pkcs11.dll
      and not
                  opensc-pkcs11.so.
      
                  Alon.
      
                  On 3/19/08, Alon Bar-Lev
<alon.barlevgmail.com> wrote:
                  > On 3/19/08, Dan Peterson
<drpetersones.net> wrote:
                  >
                  > >  When I tried to compile opensc
it compiled fine;
      and
            would run
                  but could never see the card reader I
needed the openct
      or
            (?)pscs-
                  lite and that would not compile. So I had
to abandon
      opensc
            under
                  cygwin.
                  >
                  >
                  > ‏You can try to compile OpenSC
trunk, it should work,
      I've
                  prepared
                  >  updated tarball at [1].
                  >
                  >  ./configure --enable-pcsc
                  >  make install
                  >
                  >  Alon.
                  >
                  >  [1] http://alo
n.barlev.googlepages.com/opensc-
      0.11.4-
            svn.tar.gz
                  >
      



_______________________________________________
opensc-user mailing list
opensc-userlists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-
user