Media Proxy Installation

Can you provide a little more description than: "it
says Timeout when I
try to connect to it" ?  Generally both MediaProxy and
RTPProxy work
well with OpenSER.


Did you configure /usr/local/mediaproxy/mediaproxy.ini
correctly for
your environment ?

Regards,
Norm

Arya wrote:
> I read http://medi
aproxy.ag-projects.com/INSTALL and I followed the
> instructions than I went to sipwise.com <http://sipwise.com> and
got a
> configuration file from there, but when I use that
configuration it
> says Timeout when I try to connect to it, I installed
openser from
> APT. I only need media proxy for NAT.  Is RTP proxy
easier to install
> and configure?
>
> On 10/6/07, *Arya* <arya6000gmail.com
<mailto:arya6000gmail.com>>
> wrote:
>
>     Hello
>
>     I installed Media proxy by downloading it and
putting it in :
>
>     /usr/local/mediaproxy
>
>     than I copied
>
>     /usr/local/mediaproxy/boot/mediaproxy.debian to
>     /etc/init.d/mediaproxy
>
>     and started it
>
>     Is that all I need to do with the installation?
>
>     What would I have to add to openser.cfg?
>
>     -- 
>     Thank You 
>
>
>
>
> -- 
> Thank You
>
------------------------------------------------------------
------------
>
> _______________________________________________
> Users mailing list
> Usersopenser.org
> htt
p://openser.org/cgi-bin/mailman/listinfo/users
>   


_______________________________________________
Users mailing list
Usersopenser.org
htt
p://openser.org/cgi-bin/mailman/listinfo/users

Take a look at the MediaProxy documentation. 

I think there is a command line program called: sessions.py
that will
display realtime information. 
In addition, there is web version that can be installed. 
You can also look at the syslog messages, as information
messages are
listed there.

Regards,
Norm

Arya wrote:
> ok I changed my openser.cfg from the one with
sipwise.com
> <http://sipwise.com>
with Mediaproxy support, Is there anyway to check
> if its actually being used by Openser?
>
> On 10/6/07, *Arya* <arya6000gmail.com
<mailto:arya6000gmail.com>>
> wrote:
>
>     Hello
>
>     I installed Media proxy by downloading it and
putting it in :
>
>     /usr/local/mediaproxy
>
>     than I copied
>
>     /usr/local/mediaproxy/boot/mediaproxy.debian to
>     /etc/init.d/mediaproxy
>
>     and started it
>
>     Is that all I need to do with the installation?
>
>     What would I have to add to openser.cfg?
>
>     -- 
>     Thank You 
>
>
>
>
> -- 
> Thank You
>
------------------------------------------------------------
------------
>
> _______________________________________________
> Users mailing list
> Usersopenser.org
> htt
p://openser.org/cgi-bin/mailman/listinfo/users
>   


_______________________________________________
Users mailing list
Usersopenser.org
htt
p://openser.org/cgi-bin/mailman/listinfo/users

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Good Morning, Mediaproxy isn't very hard too install...
A friend of mine have just made an updated debian packet of
mediaproxy and we're going to upload it soon!

Bafore having the .deb, I used to follow
I have do this:
wget http://mediaproxy.ag-projects.com/mediaproxy-1.9.0.tar.
gz
tar xvzf mediaproxy-1.9.0.tar.gz
mv mediaproxy /usr/local/
ln -s /usr/local/mediaproxy/boot/mediaproxy.debian
/etc/init.d/mediaproxy

use this to monitor the proxydispatcher and the mediaproxy:
/usr/local/mediaproxy/proxydispatcher.py --no-fork
/usr/local/mediaproxy/mediaproxy.py --no-fork

Follow http://www.voip-info.org/wiki/view/OpenSER+And+Mediapro
xy to configure OpenSER



Here is an example of my mediaproxy configuration:


[Dispatcher]
start = yes
socket = /var/run/proxydispatcher.sock
listen = 0.0.0.0:25061
defaultProxy = /var/run/mediaproxy.sock
defaultProxy = domain://leurent.eu

[MediaProxy]

start = yes
socket = /var/run/mediaproxy.sock
proxyIP = xxx.xxx.xxx.xxx
portRange = 60000:65000
;TOS = 0xb8
idleTimeout = 25
holdTimeout = 30
forceClose = 5000

Have a nice day



Arya a écrit :
> I'v got headaches trying to make Mediaproxy work. Can
you point me to a
> good documentation that i can read?
> 
> Thanks
> 
> On 10/6/07, *Arya* < arya6000gmail.com
<mailto:arya6000gmail.com>> wrote:
> 
>     Hello
> 
>     I installed Media proxy by downloading it and
putting it in :
> 
>     /usr/local/mediaproxy
> 
>     than I copied
> 
>     /usr/local/mediaproxy/boot/mediaproxy.debian to
/etc/init.d/mediaproxy
> 
>     and started it
> 
>     Is that all I need to do with the installation?
> 
>     What would I have to add to openser.cfg?
> 
>     -- 
>     Thank You 
> 
> 
> 
> 
> -- 
> Thank You
> 
> 
>
------------------------------------------------------------
------------
> 
> _______________________________________________
> Users mailing list
> Usersopenser.org
> htt
p://openser.org/cgi-bin/mailman/listinfo/users
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org


iD8DBQFHCymIqjpLE0HiOBYRAheGAJwMWW3tMbWKPfta7EuVlZU5TgAs/ACg
gAxP
q2rU01qTLT3Vd6Fs2SPRdgQ=
=7Z2Q
-----END PGP SIGNATURE-----

_______________________________________________
Users mailing list
Usersopenser.org
htt
p://openser.org/cgi-bin/mailman/listinfo/users