Re: Re: Openser SVN trunk and RtpProxy 0.3-2

El Friday 26 October 2007 02:05:05 Ricardo Ferreira - MC
escribió:
> > Any help please? I don't see any new mandatory
parameter or similar in
> > module doc, what can be wrong if it worked with
OpenSer 1.2.2?

> Change from 127.0.0.1 to the real IP address of your
sip server, change
> the openser.cfg accordingly and reload it.... it should
work....

Thanks but in doesn't work. In fact I already tryed to
conect with a RtpProxy 
running in other host with same error.

Now I've tryed to run it in localhost but setting the public
IP:

  modparam("nathelper", "rtpproxy_sock",
"udp:85.76.0.110:22222")
  ~# rtpproxy -f -l 0.0.0.0 -s udp:85.76.0.110:22222


Exactly the same error:

INFO:nathelper:rtpp_test: rtp proxy
<udp:85.76.0.110:22222> found, support for 
it enabled
ERROR:nathelper:send_rtpp_command: can't read reply from a
RTP proxy
ERROR:nathelper:send_rtpp_command: proxy
<udp:85.76.0.110:22222> does not 
respond, disable it
WARNING:nathelper:rtpp_test: can't get version of the RTP
proxy
WARNING:nathelper:rtpp_test: support for RTP proxy
<udp:85.76.0.110:22222> has 
been disabled temporarily


And RtpProxy says:

received command "1886_0 V"
sending reply "1886_0 20040107
"
received command "1886_1 VF 20050322"
sending reply "1886_1 1
"
received command "1887_0 V"
sending reply "1887_0 20040107
"
received command "1888_0 V"
sending reply "1888_0 20040107



The same configuration worked perfectly in OpenSer 1.2.2
(now I use the SVN 
2983 reversion).



Please help, I don't know what more I can try.

Thanks in advance.



-- 
Iñaki Baz Castillo
ibcin.ilimit.es

_______________________________________________
Users mailing list
Usersopenser.org
htt
p://openser.org/cgi-bin/mailman/listinfo/users

Hi Inaki:

start rtpproxy like this:
rtpproxy -l 85.76.0.110 -s udp:127.0.0.1:22222

and set the nathelper param like this:
modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:22222")


Regards,
Ovidiu Sas

On 10/26/07, Iñaki Baz Castillo <ibcin.ilimit.es> wrote:
> El Friday 26 October 2007 02:05:05 Ricardo Ferreira -
MC escribió:
> > > Any help please? I don't see any new
mandatory parameter or similar in
> > > module doc, what can be wrong if it worked
with OpenSer 1.2.2?
>
> > Change from 127.0.0.1 to the real IP address of
your sip server, change
> > the openser.cfg accordingly and reload it.... it
should work....
>
> Thanks but in doesn't work. In fact I already tryed to
conect with a RtpProxy
> running in other host with same error.
>
> Now I've tryed to run it in localhost but setting the
public IP:
>
>   modparam("nathelper",
"rtpproxy_sock",
"udp:85.76.0.110:22222")
>   ~# rtpproxy -f -l 0.0.0.0 -s udp:85.76.0.110:22222
>
>
> Exactly the same error:
>
> INFO:nathelper:rtpp_test: rtp proxy
<udp:85.76.0.110:22222> found, support for
> it enabled
> ERROR:nathelper:send_rtpp_command: can't read reply
from a RTP proxy
> ERROR:nathelper:send_rtpp_command: proxy
<udp:85.76.0.110:22222> does not
> respond, disable it
> WARNING:nathelper:rtpp_test: can't get version of the
RTP proxy
> WARNING:nathelper:rtpp_test: support for RTP proxy
<udp:85.76.0.110:22222> has
> been disabled temporarily
>
>
> And RtpProxy says:
>
> received command "1886_0 V"
> sending reply "1886_0 20040107
> "
> received command "1886_1 VF 20050322"
> sending reply "1886_1 1
> "
> received command "1887_0 V"
> sending reply "1887_0 20040107
> "
> received command "1888_0 V"
> sending reply "1888_0 20040107
>
>
>
> The same configuration worked perfectly in OpenSer
1.2.2 (now I use the SVN
> 2983 reversion).
>
>
>
> Please help, I don't know what more I can try.
>
> Thanks in advance.
>
>
>
> --
> Iñaki Baz Castillo
> ibcin.ilimit.es
>
> _______________________________________________
> Users mailing list
> Usersopenser.org
> htt
p://openser.org/cgi-bin/mailman/listinfo/users
>

_______________________________________________
Users mailing list
Usersopenser.org
htt
p://openser.org/cgi-bin/mailman/listinfo/users