|
List Info
Thread: de-brick ipaq 2200
|
|
| de-brick ipaq 2200 |
|
2006-07-18 20:25:31 |
Who can de-brick a ipaq 2200 via jtag?
Where is a how-to using jtag?
After restoring flash from CF-Card with message flash OK,
checksum OK
nothing than the bootloader starts over.
mail to info hermann-seiz.de
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
| de-brick ipaq 2200 |
|
2006-07-21 00:25:55 |
Hi Hermann,
This subject is probably best suited for the h2200-port
list.
Hermann Seiz wrote:
> Who can de-brick a ipaq 2200 via jtag?
? Unknown.
> Where is a how-to using jtag?
AFAIK none exists for h2200.
> After restoring flash from CF-Card with message flash
OK, checksum OK
> nothing than the bootloader starts over.
I assume you mean LAB is booting but finds no Linux because
you've
restored winCe?
Have you replaced the bootloader (LAB) with the original as
well?
Ref: http://www.handhelds.org/moin/moin.cgi/HpIpaqH2200LAB
Do you have a serial cradle/cable?
Marcus.
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQhandhelds.org
https://h
andhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
|
|
[1-8]
|
|
|
about | contact Other archives ( Real Estate discussion Medical topics )
|