ipaq 3870 brick

yo done as said by paul in the last post, i used a ac adapter and dowloaded the file through firefox checked the md5 and still no go its starting to annoy me i have tried several different jffs2 images and still no luck. would using ; OHH Bootldr 2.18.01   on a 3870 screw up in any way

 

 

 

 

boot> boot   ;      
booting jffs2...      ;         
booting boot/zImage from partition >root<         ;           ;           ;         
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!      ;           ;           ;           ;           ;           ;           ;
build_list: max = 01F7FFBC      ;           ;        
.. 
dir entries = 00000979      ;           ;    
frag entries = 00002157      ;           ;     
+4 increments = 00000000      ;           ;      
+file_offset increments = 00002B07      ;           ;           ;     
loaded file of size = 0x0009C1B0 at location 0xC0008000  ;           ;           ;           ;           ;      
kernel partition base C0008000      ;           ;           ; 
kernel_magic=E1A00000           ;         
kernel_region_words[9]=016F2818  ;           ;           ;      
Linux ELF flash_imgstart=50040000 size=01F80000 dest=C0000000 offset=00008000   ;           ;           ;           ;           ;           ;           ;       
MMU Control=C19F4071 ;           ;       
MMU PIDVAM=00000000   ;           ;    
Skipping kernel copy by request.      ;           ;           ;   
C0008000: E1A00000      ;           ;
C0008004: E1A00000      ;           ;
C0008008: E1A00000      ;           ;
C000800C: E1A00000      ;           ;
C0008010: E1A00000
C0008014: E1A00000
C0008018: E1A00000
C000801C: E1A00000
C0008020: EA000002
C0008024: 016F2818
root_filesystem_name=ramdisk
Grabbed linuxargs, argc = 00000001
Using mach_type 00000089
setting boot parameters to
root=/dev/mtdblock1 init=/linuxrc noinitrd console=none
mdcnfg=0000F367
Making core tag at C0000100
Making cmdline tag at C0000114
Making mem32 tag at C00001D0
command line is: mtdparts=ipaq:0x000400000x00000000(bootldr)ro,0x01F800000x000
40000(root),0x000400000x01FC0000(asset) root=/dev/mtdblock1 init=/linuxrc noini
trd console=none  rootfstype=jffs2
Disabling LCD controller
linuxEntryPoint=C0008000
Booting Linux image
Uncompressing Linux........................................... done, booting the
 kernel.