Ok then do what I mentioned in one my last emails with the
print screen key. If it's ok if you save the shot as a
bitmap,
then fine. If not, IrfanView I mentioned is free. I used
it
all the time with schematics and the like so I'm sure you
can
use it anyway. http://irfanview.com/
-Clint
God Bless
Clint Hamilton, Owner
http://OrpheusComputing.c
om
----- Original Message -----
From: "LarryB"
Well after a bit of running around I was able to find out
two
things.
First you are correct the document is protected and you can
tell by
going to file then document properties then security and it
will tell
you what is protected. Next in a document that is not all
protected you
can select an area with the snapshot function then go to
print
and it
will say print graphic and it will print just the area you
selected
filling the complete paper size.
Now if I can just unprotect the document I will be able to
print what I
need.
LarryBrowning
K & L Electronics
Keith Thompson wrote:
> The best test would be to go back to a document that
worked
> before and
> see if you can print from it. If so, then the current
one
> that you are
> working with is protected. I'm not sure, unless you
have the
> full
> acrobat program (not just the reader) that you can tell
if a
> doc is
> protected.
>
> Keith
>
> LarryB wrote:
>
>> Actually I have done this before where I just
select a part
>> of the
>> page I want text or what ever and after selecting I
go to
>> print and
>> the "print selection" is available. For
some reason I can
>> not remember
>> if I used the camera or the data selection tool. In
any case
>> it does
>> not work anymore.
>> How would I tell if the document is protected.
These are TV
>> schematics.
>>
>> LarryBrowning
>> K & L Electronics
>>
>>
>>
>> Keith Thompson wrote:
>>
>>> There are some pdf documents that the author
has protected.
>>> With
>>> these, you cannot copy any part of it. You
might try FoxIt
>>> reader
>>> (pdf reader) where you can save back a copy and
now you
>>> should be
>>> able to take parts of it as you are trying. To
get just
>>> text, you do
>>> not want to use the camera, but the little
vertical line
>>> that allows
>>> you to highlight the text you want. If you
want the full
>>> graphic
>>> layout, etc, then you will want to use the
camera which
>>> will copy to
>>> a graphics program (via the clipboard). You
can get Foxit
>>> at
>>>
>>> http://www.foxitsoftwar
e.com/
>>>
>>> Keith Thompson
>>>
>>> LarryB wrote:
>>>
>>>> I tried the detect and repair function but
it did not fix
>>>> it. I
>>>> wonder if I am using it correctly. I view a
page the click
>>>> on the
>>>> little camera snapshot the drag across the
area I want to
>>>> print. In
>>>> my case the camera is always dimmed plus no
action when
>>>> clicked of
>>>> coarse.
>>>> I tried removing the program then
reinstalling it and that
>>>> did not
>>>> work either.
>>>> LarryBrowning
>>>> K & L Electronics
>>>>
>>>>
>>>>
>>>> Support-OrpheusComputing.com wrote:
>>>>
>>>>> FWIW, mine still works. You can also
go to "Help" and do
>>>>> the
>>>>> "Detect and repair"
function and see if that fixes it.
>>>>> What
>>>>> exactly do you need to do with the
"shot"? Reason I ask
>>>>> is there
>>>>> are other ways if it can't be
repaired.
>>>>> -Clint
>>>>>
>>>>>
>>>>> ----- Original Message ----- From:
"LarryB"
>>>>>
>>>>> My adoboe reader 7 does not have the
ability to select a
>>>>> part of a
>>>>> page
>>>>> and then print it. The
"snapshot" function is not
>>>>> available. It is
>>>>> dimmed. The object select function is
there and appears
>>>>> to function
>>>>> but
>>>>> I can't find any info on it in the
help menu. All I want
>>>>> to do is
>>>>> select
>>>>> a part of a page and print it.
>>>>> Thanks for any help.
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/r
ules.htm
Contact list owner <owner-pcworks imagicomm.com>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
|