PCWorks: FAT 32

Yeah I forgot to mention that too.....that bootable drive
that 
I could not access in XP also showed under XP's Disk
Management 
area.  I don't understand why it would do that.  Can you
access 
a 2nd boot drive in 98?
-Clint

God Bless
Clint Hamilton, Owner
http://OrpheusComputing.c
om


----- Original Message ----- 
From: <whckmjuno.com>

Clint:
        Your point about the bootable drive is well taken.
I just checked and with WIN XP on a 2Gb drive
formatted in FAT 16, the other Hard drive
(FAT 32 , Win 98 SE) which is bootable does not
show under windows explorer.  However it shows
as a drive in good condition under the disk
management.program of WIN XP.
I just cannot access any of the files on the drive..

Wally

On Mon, 30 Oct 2006 05:50:08 -0600 
"Support-OrpheusComputing.com"
<> writes:
> FWIW, on XP, when I've had two HD's hooked up and BOTH
of 
> them
> were bootable with XP on them, I could not see the
other
> non-booted drive in Windows.  It would seem it has a
problem
> seeing a bootable drive when it's not the one being
booted. 
> I
> can't remember now if both were NTFS or if one was
FAT32.
>
> It shouldn't matter in DOS.
> -Clint
>
>
> ----- Original Message ----- 
> From:
>
>
> Hugh:
>         I appreciate your reply.
>
> The drive is a 10Gb one with a single  10 Gb primary
> partition with a C: drive formatted in FAT 32.
>
> The operating system is win 98 SE.  When I make this
> drive the slave drive and boot an other drive as master
> formatted in NTFS, with windows XP Pro on it, the
> FAT 32 drive is not found.  The drive itself
> is picked up by the CMOS during turn on of the
> computer as a slave drive.  That is of course
> exclusive of how the drive is formatted.  The
> drive is recognized but the C:partition is not
> found by Win XP when the C: partition
> is formatted to FAT 32.
>
> I was hoping that there was a program (free) that
> would permit access to the drive from  DOS.
> There is a program that uses a  Linux system
> to access NTFS formatted drives from DOS.
>
> However, NTFS formatted drives are easily
> recognized by win XP and WIN 2000
> operating systems.
>
> Wally
>
> 9 Oct 2006 03:50:31 -0500 Hugh Vandervoort <>
writes:
> > I believe this is a function of the operating
system. In XP
> > or 2000
> > you
> > should be able to access the FAT 32 drive.
> > What kind of drive, and what's the OS? How do you
know it's 
> > a
> > FAT32
> > drive?
> >
> >
> > whckmjuno.com wrote:
> > > Is there a way to access a drive that has
been
> > > formatted in FAT 32,   from other media?
> > >
> > > I seem to be able to access other formatted
> > > drives (Fat 16,  NTFS) from the FAT 32
> > > drive, but not in the other direction.
> > >
> > > Wally
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/r
ules.htm
Contact list owner <owner-pcworksimagicomm.com>
Unsubscribing and other changes: http://pcworkers.com
=====================================================