How about Millennium? Would that operate any better?
On the Socket 7 and Slot 1. How do I tell? There are no
indication on
the Mother Board that I can see. The Pentium chip has 20
pins in one
direction and A thru Y in the other.
The computer speed has jumpers that can go from 90 mhz
processor with
60mhz bus speed up to max of 233 mhz MMX and 66 mhz on the
bus. It is
jumped at max.
Thanks
LarryBrowning
K & L Electronics
Support-OrpheusComputing.com wrote:
> Larry, FWIW, XP is going to kinda choke on 233mhz.
Contrary to
> what M$ says, you need something much faster for XP to
work its
> best. (I believe Peter told you how much memory it
could
> take). If that's a Socket 7, I believe 266mhz was the
fastest
> Pentium or AMD made in that socket. If it by chance
it's a
> Slot 1, then it should be able to take something a bit
faster.
> I think 233mhz was where Slot 1 started.
> -Clint
>
> Merry Christmas to all & God Bless
> Clint Hamilton, Owner
> http://www.OrpheusComputing.com/computers/specials.html
> http://www.Comput
ersCustomBuilt.com
>
> ----- Original Message -----
> From: "LarryB"
>
> I have a NEC Power Mate 5000 basic unit NLX which has a
40g HD
> but only
> 64m of ram. I would like to maximize the ram.It has one
more
> slot. The
> board the ram is on has 8 chips, 2 banks of 4 each. the
only
> number on
> the board is V8X64U34K110B and has the name of Viking
> conponents on the
> other side. Each chip has this number. 5264805FTT75
> The computer tower has a 233mhz Pentium in it. I was
hoping to
> load
> Windows XP and set it up for modem use as my friend
does not
> have any
> other option.
> I think it was used in a cash payroll loaning business
and only
> had a
> basic Windows NT version 4 loaded. I took the HD out to
distroy
> any
> records that might be on it. Then installed a used 40g
HD.
> Any help will be appreciated.
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/r
ules.htm
Contact list owner <owner-pcworks imagicomm.com>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
|