Yeah I meant a port. Larry have you tried do that yet with
a
PS/2 mouse and keyboard? That's why I don't like USB
devices.
I always convert any USB mouse or keyboard to PS/2.
-Clint
God Bless
Clint Hamilton, Owner
http://OrpheusComputing.c
om
----- Original Message -----
From: "LarryB"
Clint again thanks for the reply and I assume that you mean
a
single
port went bad. I have changed to other ports but that did
not
help.
I wanted to delete all USB items in the device manager and
then
let
windows reload at startup but can't get my hard wired
keyboard
and mouse
to work. The mouse works for awhile up to the end of
everything
loading
then it freezes.
Meanwhile I have tried the device on a third computer with
the
same os
and everything works fine so it is this computer.
LarryBrowning
Support-OrpheusComputing.com wrote:
> On most mobo's you press the [delete] key while
booting. On
> others it can be F1.
>
> The fact that it DID work previously, is a different
story.
> It
> would seem (if you didn't change anything) that a USB
port
> went
> bad.
> -Clint
>
>
> ----- Original Message -----
> From: "LarryB"
>
>
> Clint, Thanks for replying. I just tried 3 times to
read that
> screen at
> the start up on how to get to BIOS but have failed 3
times.
> Something
> about enter and delete I think. It flashes too fast.
> I'll check those things when I get to the screen.
>
> Both computers are using XP.
> They are both USB 2.0
> Also when I first tried the device, which was 1 or 2
weeks
> ago,
> it
> worked fine. Now it does not. I tried to go back to a
restore
> position
> of 2 weeks ago but that did not help.
>
>
> LarryBrowning
> K & L Electronics
>
>
>
> Support-OrpheusComputing. com wrote:
>
*********************************************************
> Right off hand (and going on no sleep.... again), are
both
> PC's
> set the same in the BIOS for "PnP OS
installed..... yes/no"?
> Does the one that doesn't recognize it have enough USB
ports
> enabled in the BIOS? Is there a "Legacy
USB" entry in the
> BIOS
> on that one? If so, that may have to be enabled.
>
> Have you tried to go to "Add New Hardware"
and have it scan
> automatically for new devices? I assume they are both
XP
> PC's?
> If not, and it's a '98 PC, they sometimes need
patches for
> certain USB devices.
>
> Is this device USB 2.0? If so, then maybe the PC
doesn't
> support USB 2.0 devices.
> -Clint
> *******************************************************
>
>
> ----- Original Message -----
> *************************************************
> From: "LarryB" <
> I have a device that is recognized on one of my
computers
> using
> the
> Windows XP while the other computer will not recognize
this
> device. It
> will recognize other devices though. I was going to
delete
> the
> USB items
> in the device manager but because I am using wireless
> Logitech
> keyboard
> and mouse I would be unable to use the computer
anymore. When
> I
> install
> the device then go to device manager it shows up as
"unknown
> device" and
> I have tried installing other drivers but nothing seems
to
> help. There
> is no software with the device. (the device is a Iway
350
> gps)
> Thanks
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/r
ules.htm
Contact list owner <owner-pcworks imagicomm.com>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
|