Hi Ann,
It appears your printer has some sort of sensor that detects
the type of
paper being used, and apparently there are some problems
with the sensor
causing slow printing. I'm not sure if it's the culprit in
your case, but
you can read more about it here
http://h10025.www1.hp.com/ewfrf/wc/document?lc
=en&cc=us&docname=bpy20450&product=57595&dlc
=en&lang=en#N524
and download the Media Sense Calibration Utility here:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&a
mp;cc=us&docname=bpy20754&product=57595&dlc=en&a
mp;lang=en
I would also check the website for updated drivers.
Good Luck,
Marlene
On 6/2/06, ann parker <annparker adelphia.net> wrote:
>
> I have a printer problem that I hope someone can help
me with. I usually
> do my printing in the draft mode, which means that it
prints quite
> rapidly.
> In the best mode, it is much, much slower. It is an HP
Photosmart 1215.
> Recently it has begun printing one page rapidly as it
should in the draft
> mode, but, even though I don't make a change in the
setting, the second
> page
> prints slowly as though it were in the best mode. Then
the next will be
> fast again, followed by a slow print. The print on the
pages is the same.
> The slow-printing pages are no better than the
fast-printing pages. This
> goes on until I have finished printing all the
pages-----one fast and the
> next slow. My computer is an HP Pavilion 7975. Will
appreciate any help
> you
> can give me. Ann Parker
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/r
ules.htm
Contact list owner <owner-pcworks imagicomm.com>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
|