Smoke 31933 FAIL(F) MSWin32 WinXP/.Net SP2 (x86/2 cpu)

Automated smoke report for 5.10.0 patch 31933
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 
2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP2
    using     cl version 12.00.8804
    smoketime 4 hours 38 minutes (average 13 minutes 55
seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make
test-prep

   31933     Configuration (common)
-DINST_TOP=$(INST_DRV)Smokedoesntexist
-----------
---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles
-Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging

Locally applied patches:
    DEVEL
    SMOKE31933

Failures: (common-args)
-DINST_TOP=$(INST_DRV)Smokedoesntexist
[default] 
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
-Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
-Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles
-Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
-Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
    op/magic.t..............................FAILED 34-58
    op/tie.t................................FAILED 22

Compiler messages(MSWin32):
..hv.c(448) : warning C4700: local variable 'entry' used
without having been initialized

-- 
Report by Test::Smoke v1.19_86 build 1044 running on perl
5.9.5
(Reporter v0.027 / Smoker v0.032)

Steve Hay wrote:
> Automated smoke report for 5.10.0 patch 31933
> maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700

>     2.66GHz(~2660 MHz) (x86/2 cpu) on        MSWin32 -
WinXP/.Net SP2
>     using     cl version 12.00.8804
>     smoketime 4 hours 38 minutes (average 13 minutes 55
seconds)
> 
> Summary: FAIL(F)
> 
>     op/magic.t..............................FAILED
34-58
>     op/tie.t................................FAILED 22
> 
> Compiler messages(MSWin32):
> ..hv.c(448) : warning C4700: local variable 'entry'
used without
> having been initialized 

Should be all fixed by #31937.

On Fri, Sep 21, 2007 at 09:26:21AM +0100, Steve Hay wrote:
> Steve Hay wrote:
> > Automated smoke report for 5.10.0 patch 31933
> > maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU
6700 
> >     2.66GHz(~2660 MHz) (x86/2 cpu) on       
MSWin32 - WinXP/.Net SP2
> >     using     cl version 12.00.8804
> >     smoketime 4 hours 38 minutes (average 13
minutes 55 seconds)
> > 
> > Summary: FAIL(F)
> > 
> >     op/magic.t..............................FAILED
34-58
> >     op/tie.t................................FAILED
22
> > 
> > Compiler messages(MSWin32):
> > ..hv.c(448) : warning C4700: local variable
'entry' used without
> > having been initialized 
> 
> Should be all fixed by #31937.

Sorry about that. Thanks for fixing it.

Nicholas Clark