Yes. I plug the serial cable in the com2 port(i guess), and then i
start up the server. After booting up, it goes through the usual
process(setting up network settings and so on before the username/
passwod box shows up). In the middle of this process, it starts
showing "saving ur settings..windows is shutting down" and the server
turns off.
--- In PIX_Firewall%40yahoogroups.com">PIX_Firewall
yahoogroups.com, Romulo Sousa <romulo_sousa...>
wrote:
>
> Let me understand one point: the box shuts down ONLY
>; when you connect the serial port (the console port)?
>
> [ ]'s
>
> Romulo
>
> --- Zulqar Nayen <nayenflies...> wrote:
>
> > I need some serious help asap. My boss recently
> > bought cisco pix
> > 506e. The cisco online support says that i have to
> > connect it with
> > the serial port of ther server in order to configure
> > the password and
> > ip settings. but the problem is, whenever i connect
> > it to the server
> > and restart the server, the server starts shutting
> > down autometically
> > (not an abrupt shut down, it does it systematically,
>; > that means it
> > folows the usual steps--logging off, saving your
>; > settings etc). WHY
> > on earth does it happen? and how do i get the
> > firewall to show me the
> > command console? Please help. any suggestions,
> > links to additional
> > resources will be appreciated.
> >
> >
>
>
>
>
>
__________________________________________________________
> Don't pick lemons.
> See all the new 2007 cars at Yahoo! Autos.
> http://autos.yahoo.com/new_cars.html
>
.
