Re: 515E randomly crashing

Hi,

This is issue with the RAM problem,

solution: either you need to upgrade your pix RAM from 64MB to 128 or
downgrade the Pix ios to 6.2

Regards

Gopinath

--- In PIX_Firewall%40yahoogroups.com">PIX_Firewallyahoogroups.com, "rowan.collier"
<rowan.collier...> wrote:
&gt;
> Hi
>
> I have a 515E. It is randomly crashing and then restarting.
>
> Up time is varying between 1 and 14 hours
&gt;
>
> This is the version info.
&gt;
> Cisco PIX Security Appliance Software Version 7.2(1)
> Device Manager Version 5.2(1)
&gt; Compiled on Wed 31-May-06 14:45 by xxxxxxxx
> System image file is "flash:/pix721.bin"
> Config file at boot was "startup-config&quot;
>; xxxxxxxx up 5 hours 47 mins
>; Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
> Flash E28F128J3 0xfff00000, 16MB
>; BIOS Flash AM29F400B 0xfffd8000, 32KB
>; 0: Ext: Ethernet0 : address is xxxxxxxxxxxx, irq 10
> 1: Ext: Ethernet1 : address is xxxxxxxxxxxx, irq 11
> 2: Ext: Ethernet2 : address is xxxxxxxxxxxx, irq 11
> Licensed features for this platform:
> Maximum Physical Interfaces : 3
> Maximum VLANs : 10
> Inside Hosts : Unlimited
> Failover : Disabled
> VPN-DES : Enabled
> VPN-3DES-AES : Disabled
> Cut-through Proxy : Enabled
> Guards : Enabled
> URL Filtering : Enabled
> Security Contexts : 0
> GTP/GPRS : Disabled
> VPN Peers : Unlimited
> This platform has a Restricted (R) license.
>
>
> The crash log shows a cpu hog at the same time as 'show clock'
&gt;
> Can anyone help me resolve this issue?
&gt;
> Thanks in advance
>
> Rowan
&gt;

Messages in this topic (0) Reply (via web post) | Start a new topic

.