plone and vista

i have downloaded the newest version of plone and i am
trying to run it in my
vista laptop. unfortunately i am taking no response at all.
is have i done
something wrong? do i have to download any patch for vista?

thank you in advance!
-- 
View this message in context: http://www.nabble.com/plone-and-vista-tf4243
397s15482.html#a12074971
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

please help!!!


stelios80 wrote:
> 
> i have downloaded the newest version of plone and i am
trying to run it in
> my vista laptop. unfortunately i am taking no response
at all. is have i
> done something wrong? do i have to download any patch
for vista?
> 
> thank you in advance!
> 

-- 
View this message in context: http://www.nabble.com/plone-and-vista-tf4243
397s15482.html#a12091225
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

Firing up Plone in Windows can have three simple steps:

1. Install the Windows Plone application as a service
2. Start Plone (Start, All Programs, Plone, Plone, Start
Plone)
3. Point your browser to http://localhost:8080/Plo
ne

Hope that helps.

Dan


Ploner wrote:
> 
> Hy all,
> 
> I do have exactly the same problem with my vista and
plone3. 
> Any idea?.
> 
> THX FOR HELP !!!
> 
> 
> 
> stelios80 wrote:
>> 
>> please help!!!
>> 
>> 
>> stelios80 wrote:
>>> 
>>> i have downloaded the newest version of plone
and i am trying to run it
>>> in my vista laptop. unfortunately i am taking
no response at all. is
>>> have i done something wrong? do i have to
download any patch for vista?
>>> 
>>> thank you in advance!
>>> 
>> 
>> 
> 
> 

-- 
View this message in context: http://www.nabble.com/plone-and-vista-tf4243
397s15482.html#a12338473
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

Ploner wrote:
> 
> Hy all,
> 
> I do have exactly the same problem with my vista and
plone3. 
> Any idea?.
> 
> THX FOR HELP !!!
> 

If you go to Control Panel>Administrative
Tools>Services and scroll down the
list Zope should be near the bottom if not the bottom item.
1. Is it there?
2. Does it says it is running?
3. Do you have Plone Controller installed and running?
4. If Zope is there what do you get in the browser window
for
http://localhost/ ?
-- 
View this message in context: http://www.nabble.com/plone-and-vista-tf4243
397s15482.html#a12339319
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

mac_bobby wrote:
> 
> Can you tell me how to install plone as a service?
during installation
> nothing like this will ever questioned.
> 
> And after trying to start plone through your way (Start
Plone (Start, All
> Programs, Plone, Plone, Start Plone)) nothing happens
except a loading
> mouse for a few seconds.
> 
> Hope somebody can help!
> 
> 

Zope IS installed as a service and starts automatically when
you start
Windows. It is good to check this is so by going to Control
Panel>Admin
Tools>Services and scrolling to the bottom of the
alphabetical list to see
if Zope is running.

When I have experienced this problem with Win X64 (which is
very similar to
Vista) the Zope Services status is not shown in the Service
list. Look at
the properties and it will say it is running. It is my hunch
that there is
some erroneous conflict with the use of port 80 and/or 21
set for
PLONE_WEBSERVER_PORT and PLONE_FTPSERVER_PORT respectively.
These are
defined in ...Plone 3Dataetcplone.conf. I have edited
these to 1028 and
1029. This now means you need to look for Plone in your
browser at
http://localhost:1028/
and all works fine .

I have found Plone Controller doesn't work all the time
either so I use a
command window and navigate to ...Plone 3Databin and
execute runzope.bat.
To stop it use the Maintenance section of sitesetup through
Plone UI or
ctl-Break in the cmd window and then y option to halt Zope.

This is if the Vista problem you have is the same as the
Winx64 one I
have...
-- 
View this message in context: http://www.nabble.com/plone-and-vista-tf4243
397s15482.html#a13335463
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup