ZEO Unable to Start

I've got Plone-3.0.2 installed using the Unified Installer
on Ubuntu Fawn,
the root install/zeocluster option. The installer works
great (*thank you,*
Kamal Gill and Steve McMahon).  The problem is that the
zeocluster will not
start, and the event logs show the following errors: 

------------------------------------------------------------
--------------------------------------------------------
2007-10-22T10:22:02 INFO root spawned process pid=695
------
2007-10-22T10:22:03 INFO root sleep 1 to avoid rapid
restarts
------
2007-10-22T10:22:03 INFO root pid 695: exit status 2;
exiting now
------------------------------------------------------------
--------------------------------------------------------

I am following the directions in adminPassword.txt and am
using sudo in the
command line to start the zeocluster. I've seen these
event-log errors
previously in association with directory/file permissions.
Is that what's
going on? Recommendations, anyone?
-- 
View this message in context: http://www.nabble.com/ZEO-Unable-to-Star
t-tf4671230s15482.html#a13344582
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

As a followup, I finally got zeo to start for the first time
after about six
attempts. After which, I moved a product into
/opt/Plone-3.0.2/zeocluster/Products and attempted to
restart. It hung once
again but eventually restarted after about 8 attempts. I'm
glad to see that
the zeocluster starts eventually, but anybody got an idea
why it's hanging
like this?


Rose Pruyne wrote:
> 
> I've got Plone-3.0.2 installed using the Unified
Installer on Ubuntu
> Fawn...

-- 
View this message in context: http://www.nabble.com/ZEO-Unable-to-Star
t-tf4671230s15482.html#a13344889
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

By my experience, if there are no errors in any of the
event.log files, 
the most common problem is that something is already
occupying the ZEO 
port (8100, unless you change it).

Usually, that something is a prior running of ZEO itself.
It's very easy 
to do that, and if you've reinstalled the ZEO instance may
even 
effectively be a Zombie, divorced from any controlling
program.

Rose Pruyne wrote:
> I've got Plone-3.0.2 installed using the Unified
Installer on Ubuntu Fawn,
> the root install/zeocluster option. The installer works
great (*thank you,*
> Kamal Gill and Steve McMahon).  The problem is that the
zeocluster will not
> start, and the event logs show the following errors: 
> 
>
------------------------------------------------------------
--------------------------------------------------------
> 2007-10-22T10:22:02 INFO root spawned process pid=695
> ------
> 2007-10-22T10:22:03 INFO root sleep 1 to avoid rapid
restarts
> ------
> 2007-10-22T10:22:03 INFO root pid 695: exit status 2;
exiting now
>
------------------------------------------------------------
--------------------------------------------------------
> 
> I am following the directions in adminPassword.txt and
am using sudo in the
> command line to start the zeocluster. I've seen these
event-log errors
> previously in association with directory/file
permissions. Is that what's
> going on? Recommendations, anyone?

-- 
______________________________________________________

Steve McMahon
Reid-McMahon, LLC
stevereidmcmahon.com
stevedcn.org

_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

Steve, this makes perfect sense - I did do a couple of
reinstalls prior to
this. A system reboot got rid of the stray child processes.
ZEO starts right
off the bat now. 


Steve McMahon wrote:
> 
> By my experience, if there are no errors in any of the
event.log files, 
> the most common problem is that something is already
occupying the ZEO 
> port...
> 
> Rose Pruyne wrote:
>> ......The problem is that the zeocluster will not
start.....
> 

-- 
View this message in context: http://www.nabble.com/ZEO-Unable-to-Star
t-tf4671230s15482.html#a13349762
Sent from the Installation, Setup, Upgrades mailing list
archive at Nabble.com.


_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup

Hi all,

We're running Plone 2.5.3 on Zope 2.9.7 (on OpenBSD 4.1),
and I'm
wondering if Plone starts off with IncrementalSearch2
enabled, or if
that's a separate product (which we haven't installed).

I'm tracking down a memory leak, and found notes [1] and
Dieter's patch
[2], and it seems to have some relevance to our case (mem
leak, bug for
64-bit), if our Plone actually uses it.

[1] http://archives.free.net.ph/message/20070403
.162337.3507e8c7.en.html

[2] http://www.dieter.handshake.de/pyprojects/zope
/#IncrementalSearch2

***************
* Adam Getchell, M.S.
* Director of Information Technology
* College of Agricultural & Environmental Sciences, UC
Davis
* acgetchellucdavis.edu (530)752-8008
***************
"Invincibility is in oneself, vulnerability in the
opponent." -- Sun Tzu






_______________________________________________
Setup mailing list
Setuplists.plone.org
http://
lists.plone.org/mailman/listinfo/setup