I have found this to be helpful..it's for fedora so it
should be pretty
close and has some good screenshots...
http://www.ping.co.il/no
de/1
Ian
-----Original Message-----
From: rhelv5-list-bounces redhat.com
[mailto:rhelv5-list-bounces redhat.com] On Behalf Of
Bill Watson
Sent: Friday, April 18, 2008 12:19 PM
To: 'Red Hat Enterprise Linux 5 (Tikanga) discussion
mailing-list'
Subject: [rhelv5-list] RHEL 5.1 install w/ software RAID
Does anyone have a monkey-see monkey-do click list for
setting up
software
raid during installation of RHEL 5.1?
I have 2 drives (sda2,sdb1) (not sure why a2 isn't a1) that
are
identical
and I wish to put /boot and / on them. I have a 3rd drive
(sdc1) I want
to
put /u and /swap onto.
I simply want sda2 and sdb1 to be a RAID 1 mirror, covering
as much of
the
Opsys as s/w RAID will allow.
If anybody has any such checklist for any configuration I
could most
likely
tailor it to my needs. It's just I have no monkey-see list
to adapt.
Bill Watson
bill magicdigits.com
_______________________________________________
rhelv5-list mailing list
rhelv5-list redhat.com
h
ttps://www.redhat.com/mailman/listinfo/rhelv5-list
_______________________________________________
rhelv5-list mailing list
rhelv5-list redhat.com
h
ttps://www.redhat.com/mailman/listinfo/rhelv5-list
|