ahc doesn't attach in Tyan S2882

ahc0: <Adaptec 19160B Ultra160 SCSI adapter> mem
0x80004010-0x8000401f irq 21 at
 device 3.0 on pci1
ahc0: Defaulting to MEMIO on
pci1: child ahc0 requested type 3 for rid 0x14, but the BAR
says it is an ioport
pcib3: ahc0 requested I/O range 0x8000-0x8fff: in range
ahc0: Lazy allocation of 0x4 bytes rid 0x10 type 4 at 0x8000
ahc0: PCI Device 1:3:0 failed I/O mapped test.
ahc0: can't allocate register resources

ahc0pci1:3:0:  class=0x010000 card=0x62a19005
chip=0x00819005 rev=0x02 hdr=0x00
    vendor   = 'Adaptec Inc'
    device   = '19160 AIC-7892B Ultra160 SCSI Adapter'
    class    = mass storage
    subclass = SCSI


-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phkFreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained
by incompetence.
_______________________________________________
freebsd-scsifreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to
"freebsd-scsi-unsubscribefreebsd.org"