Re: Adaptec 3405 does not work with FreeBSD 7.0 Generic AMD64

Thomas Vogt wrote:
> I've some problem with an Adaptec 3405 SAS/SATA Raid
Controller.
> Hardware Release note for 7.0 shows Adaptec SAS RAID
3405 as supported
> controller but it looks like its not supported by
FreeBSD 7.0 GENERIC
> 64bit.
>
> When I try to install FreeBSD 7.0 64bit from the
install disc1 i got: no
> disk found.
>
> I installed FreeBSD on another disk, not connected to
the Adaptec
> Controller.
>
>
> 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36
UTC 2008
> root at driscoll.cse.buffalo.edu <http://lists.freebsd.org/
mailman/listinfo/freebsd-scsi>:/usr/obj/usr/src/sys/GENER
IC  amd64
>
> Boot:
> aac0: <Adaptec RAID 3405> mem
0xb8a00000-0xb8bfffff irq 18 at device
> 14.0 on pci4
> aac0: Enabling 64-bit address support
> aac0: New comm. interface enabled
> aac0: [ITHREAD]
> aac0: Adaptec 3405, aac driver 2.0.0-1
> aac0: Error 5 sending VMIoctl command
>   

similar situation

part of dmesg output
------------------------------------------------------------
------
Apr 17 14:34:24 damascus kernel: aac0: <Adaptec RAID
3405> mem 
0xdf200000-0xdf3fffff irq 18 at device 14.0 on pci4
Apr 17 14:34:24 damascus kernel: aac0: New comm. interface
enabled
Apr 17 14:34:24 damascus kernel: aac0: [ITHREAD]
Apr 17 14:34:24 damascus kernel: aac0: Adaptec 3405, aac
driver 2.0.0-1
Apr 17 14:34:24 damascus kernel: aac0: Error 5 sending
VMIoctl command
------------------------------------------------------------
------

# uname -a
FreeBSD damascus 7.0-RELEASE FreeBSD 7.0-RELEASE #5: Fri Apr
11 14:31:47 
MSD 2008     rootdamascus:/usr/obj/usr/src/sys/DAMASCUS 
i386

/Vladimir Ermakov

_______________________________________________
freebsd-scsifreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi

To unsubscribe, send any mail to
"freebsd-scsi-unsubscribefreebsd.org"

On Thu, Apr 17, 2008 at 02:57:40PM +0400, sam wrote:

> part of dmesg output
>
------------------------------------------------------------
------
> Apr 17 14:34:24 damascus kernel: aac0: <Adaptec RAID
3405> mem 
> 0xdf200000-0xdf3fffff irq 18 at device 14.0 on pci4
> Apr 17 14:34:24 damascus kernel: aac0: New comm.
interface enabled
> Apr 17 14:34:24 damascus kernel: aac0: [ITHREAD]
> Apr 17 14:34:24 damascus kernel: aac0: Adaptec 3405,
aac driver 2.0.0-1
> Apr 17 14:34:24 damascus kernel: aac0: Error 5 sending
VMIoctl command
>
------------------------------------------------------------
------

Sorry about that -- please try the latest RELENG_7 driver
from CVS if
you can; it should all be fixed up now.  The driver in 7.0
doesn't
handle arrays >2TB, and there might be some
amd64-specific problem as
well.

The VMIoctl error is related to passthrough devices
(/dev/pass*) and
isn't directly related to the failure to find a disk.

-Ed
_______________________________________________
freebsd-scsifreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi

To unsubscribe, send any mail to
"freebsd-scsi-unsubscribefreebsd.org"