SER Running but .......

Hi,
I already have SER running on my PC but I couldn't go
further to establish
a communication between two sip phones (softphones on my
system).

I tried using EKIGA softphone and LINPHONE in UBUNTU but
futile.
Questions:

1. Can I use SER without specifying
"LISTEN=XX.XX.XX.XX" because it was
not included in the ser.cfg file which i recently
downloaded?

2. Do I need to get NAT transversal inplace before
communication can be
established despite the use of 2 softphone on my PC?

3. I did the required modification to ser.cfg in order to
use Mediaproxy
but I keep getting "1 error" each time I restart
SER.

The modification made was this:
modparam("mediaproxy",
"mediaproxy-socket",
"/var/run/mediaproxy.sock")

changed to

modparam("mediaproxy",
"mediaproxy-select",
"/var/run/proxydispatcher.sock")

KINDLY HELP OUT.

MIKE


_______________________________________________
Sip-implementors mailing list
Sip-implementorscs.columbia.edu
https://lists.cs.columbia.edu/cucslists/listinf
o/sip-implementors

The SER has a email list  seruserslists.iptel.org. which can
help you in
SER specific issues.

See inline.

Thanks,
Neel


> -----Original Message-----
> From: sip-implementors-bouncescs.columbia.edu
[mailto:sip-implementors-
> bouncescs.columbia.edu] On Behalf Of micadeyeyecrg.ee.uct.ac.za
> Sent: Monday, April 23, 2007 6:52 AM
> To: sip-implementorscs.columbia.edu
> Subject: [Sip-implementors] SER Running but .......
> 
> Hi,
> I already have SER running on my PC but I couldn't go
further to establish
> a communication between two sip phones (softphones on
my system).
> 
> I tried using EKIGA softphone and LINPHONE in UBUNTU
but futile.
> Questions:
> 
> 1. Can I use SER without specifying
"LISTEN=XX.XX.XX.XX" because it was
> not included in the ser.cfg file which i recently
downloaded?

The port information in SER can be provided as 

listen=XX.XX.XX.XX # your SIP SER box IP Address goes here.
port=5060

> 
> 2. Do I need to get NAT transversal inplace before
communication can be
> established despite the use of 2 softphone on my PC?

Before trying NAT, try to make a call with all the devices
in the same
network.  Once you have worked that out, you can bring in
NAT, etc.
> 
> 3. I did the required modification to ser.cfg in order
to use Mediaproxy
> but I keep getting "1 error" each time I
restart SER.
> 
> The modification made was this:
> modparam("mediaproxy",
"mediaproxy-socket",
"/var/run/mediaproxy.sock")
> 
> changed to
> 
> modparam("mediaproxy",
"mediaproxy-select",
> "/var/run/proxydispatcher.sock")
> 
> KINDLY HELP OUT.
> 
> MIKE
> 
> 
> _______________________________________________
> Sip-implementors mailing list
> Sip-implementorscs.columbia.edu
> https://lists.cs.columbia.edu/cucslists/listinf
o/sip-implementors


_______________________________________________
Sip-implementors mailing list
Sip-implementorscs.columbia.edu
https://lists.cs.columbia.edu/cucslists/listinf
o/sip-implementors