|
List Info
Thread: RE: Two libss7 questions, and, HELP!
|
|
| RE: Two libss7 questions, and, HELP! |
 
South Africa |
2007-04-12 09:09:51 |
Hmm..unfortunately still no joy; something seems to have
broken. With heads
of zaptel, libss7 and asterisk, I still get the following
odd behaviour:
1) Upon startup, I get:
[Apr 12 16:02:37] ERROR[3300]: chan_zap.c:8566 ss7_linkset:
Error in write
Unknown error 500
repeated several times.
Shortly thereafter, I get:
chan_zap.c:8878 zt_ss7_error: [1] Received MSU in invalid
state 0
..scrolling forever madly.
Asterisk chews 100% CPU.
ss7 show linkset 1 shows SS7 up, but the other side shows
the link going up
and down intermittently.
dmesg shows many lines of
HDLC Receiver overrun on channel TE4/0/1/1
(master=TE4/0/1/1)
None of this happens when I set the signaling channel to a
bearer timeslot,
for what it's worth.
Any ideas, please, anyone?
Regards,
Charl
> -----Original Message-----
> From: asterisk-ss7-bounces lists.digium.com
> [mailto:asterisk-ss7-bounceslists.digium.com] On Behalf
Of
> Matthew Fredrickson
> Sent: 10 April 2007 21:23
> To: asterisk-ss7lists.digium.com
> Subject: Re: [asterisk-ss7] Two libss7 questions, and,
HELP!
>
> Make sure you compile and install in this order:
> zaptel
> libss7
> asterisk
>
> If it still occurs, execute asterisk with the -g flag,
open
> the core dump with gdb, and do a "thread apply all
bt" and
> post that to the bugtracker.
>
> Matthew Fredrickson
>
> On Apr 10, 2007, at 1:52 PM, Charl Barnard wrote:
>
> > Hi All,
> > Since the last patch has been applied to allow a
second voice trunk
> > with no signaling trunk (r78) has been committed,
I've not
> been able
> > to get a working version of Asterisk with libss7
running
> again, with *
> > segfaulting when chan_zap.so gets loaded.
> > Is there a well-known recipe I can follow to
replicate the
> development
> > (working) setup? Such as get zap trunk, libss7
trunk,
> asterisk trunk,
> > or whatever versions of those, that I can install,
and get back
> > running again? I suspect some interdependency
between these
> components
> > that I'm not able to concoct the magic brew of
again to get
> a running
> > config? And this without the second voice trunk,
yet ..
> > Regards,
> >
Charl_______________________________________________
> > --Bandwidth and Colocation provided by
Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
|
|
| Re: Two libss7 questions, and, HELP! |
|
2007-04-13 00:54:54 |
|
"[Apr 12 16:02:37] ERROR[3300]: chan_zap.c:8566 ss7_linkset: Error in write
Unknown error 500"
the same above error issue had been a case with me when i tried libss7
I mentioned it on the list but to no avail.
Umar Tarar
On 4/12/07, Charl Barnard < charlmolo.co.za">charlmolo.co.za> wrote:
Hmm..unfortunately still no joy; something seems to have broken. With heads
of zaptel, libss7 and asterisk, I still get the following odd behaviour:
1) Upon startup, I get:
[Apr 12 16:02:37] ERROR[3300]: chan_zap.c:8566 ss7_linkset: Error in write
Unknown error 500
repeated several times.
Shortly thereafter, I get:
chan_zap.c:8878 zt_ss7_error: [1] Received MSU in invalid state 0
..scrolling forever madly.
Asterisk chews 100% CPU.
ss7 show linkset 1 shows SS7 up, but the other side shows the link going up
and down intermittently.
dmesg shows many lines of
HDLC Receiver overrun on channel TE4/0/1/1 (master=TE4/0/1/1)
None of this happens when I set the signaling channel to a bearer timeslot,
for what it's worth.
Any ideas, please, anyone?
Regards,
Charl
> -----Original Message-----
> From:
asterisk-ss7-bounceslists.digium.com">asterisk-ss7-bounceslists.digium.com
>; [mailto: asterisk-ss7-bounceslists.digium.com">asterisk-ss7-bounceslists.digium.com] On Behalf Of
> Matthew Fredrickson
> Sent: 10 April 2007 21:23
> To: asterisk-ss7lists.digium.com">asterisk-ss7lists.digium.com
>; Subject: Re: [asterisk-ss7] Two libss7 questions, and, HELP!
>
> Make sure you compile and install in this order:
>; zaptel
>; libss7
>; asterisk
>
> If it still occurs, execute asterisk with the -g flag, open
> the core dump with gdb, and do a "thread apply all bt" and
> post that to the bugtracker.
>
> Matthew Fredrickson
>
> On Apr 10, 2007, at 1:52 PM, Charl Barnard wrote:
>;
> > Hi All,
> > Since the last patch has been applied to allow a second voice trunk
> > with no signaling trunk (r78) has been committed, I've not
> been able
> > to get a working version of Asterisk with libss7 running
> again, with *
> > segfaulting when chan_zap.so gets loaded.
> > Is there a well-known recipe I can follow to replicate the
> development
> > (working) setup? Such as get zap trunk, libss7 trunk,
>; asterisk trunk,
>; > or whatever versions of those, that I can install, and get back
>; > running again? I suspect some interdependency between these
> components
> > that I'm not able to concoct the magic brew of again to get
> a running
> > config? And this without the second voice trunk, yet ..
> > Regards,
> > Charl_______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
>; > To UNSUBSCRIBE or update options visit:
>; > ; http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>;
http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
; |____/__| ; /__/ __ |__| __|
|
| Re: Two libss7 questions, and, HELP! |
 
United States |
2007-04-13 09:23:04 |
Are you using trunk zaptel? If so, if you haven't updated
it recently,
I ended up introducing a bug when I was applying a bug fix
that caused
data corruption related errors such as this. Can you update
your
zaptel to latest trunk and see if it still gives this error?
I think
that is should fix this.
Matthew Fredrickson
On Apr 12, 2007, at 9:09 AM, Charl Barnard wrote:
> Hmm..unfortunately still no joy; something seems to
have broken. With
> heads
> of zaptel, libss7 and asterisk, I still get the
following odd
> behaviour:
>
> 1) Upon startup, I get:
>
>
> [Apr 12 16:02:37] ERROR[3300]: chan_zap.c:8566
ss7_linkset: Error in
> write
> Unknown error 500
>
> repeated several times.
>
> Shortly thereafter, I get:
>
> chan_zap.c:8878 zt_ss7_error: [1] Received MSU in
invalid state 0
>
> ..scrolling forever madly.
>
> Asterisk chews 100% CPU.
>
> ss7 show linkset 1 shows SS7 up, but the other side
shows the link
> going up
> and down intermittently.
>
> dmesg shows many lines of
>
> HDLC Receiver overrun on channel TE4/0/1/1
(master=TE4/0/1/1)
>
> None of this happens when I set the signaling channel
to a bearer
> timeslot,
> for what it's worth.
>
> Any ideas, please, anyone?
>
> Regards,
>
> Charl
>
>
>> -----Original Message-----
>> From: asterisk-ss7-bounceslists.digium.com
>> [mailto:asterisk-ss7-bounceslists.digium.com] On Behalf
Of
>> Matthew Fredrickson
>> Sent: 10 April 2007 21:23
>> To: asterisk-ss7lists.digium.com
>> Subject: Re: [asterisk-ss7] Two libss7 questions,
and, HELP!
>>
>> Make sure you compile and install in this order:
>> zaptel
>> libss7
>> asterisk
>>
>> If it still occurs, execute asterisk with the -g
flag, open
>> the core dump with gdb, and do a "thread apply
all bt" and
>> post that to the bugtracker.
>>
>> Matthew Fredrickson
>>
>> On Apr 10, 2007, at 1:52 PM, Charl Barnard wrote:
>>
>>> Hi All,
>>> Since the last patch has been applied to allow
a second voice trunk
>>> with no signaling trunk (r78) has been
committed, I've not
>> been able
>>> to get a working version of Asterisk with
libss7 running
>> again, with *
>>> segfaulting when chan_zap.so gets loaded.
>>> Is there a well-known recipe I can follow to
replicate the
>> development
>>> (working) setup? Such as get zap trunk, libss7
trunk,
>> asterisk trunk,
>>> or whatever versions of those, that I can
install, and get back
>>> running again? I suspect some interdependency
between these
>> components
>>> that I'm not able to concoct the magic brew of
again to get
>> a running
>>> config? And this without the second voice
trunk, yet ..
>>> Regards,
>>>
Charl_______________________________________________
>>> --Bandwidth and Colocation provided by
Easynews.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com
--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
|
|
| Re: Two libss7 questions, and, HELP! |
|
2007-04-13 13:18:00 |
|
ok I'll try that and then update the list
On 4/13/07, Matthew Fredrickson < creslindigium.com">creslindigium.com> wrote:
Are you using trunk zaptel? If so, if you haven't updated it recently,
I ended up introducing a bug when I was applying a bug fix that caused
data corruption related errors such as this. ; Can you update your
zaptel to latest trunk and see if it still gives this error? I think
that is should fix this.
Matthew Fredrickson
On Apr 12, 2007, at 9:09 AM, Charl Barnard wrote:
> Hmm..unfortunately still no joy; something seems to have broken. With
> heads
> of zaptel, libss7 and asterisk, I still get the following odd
> behaviour:
>
> 1) Upon startup, I get:
>;
>
> [Apr 12 16:02:37] ERROR[3300]: chan_zap.c:8566 ss7_linkset: Error in
> write
> Unknown error 500
>
> repeated several times.
>;
> Shortly thereafter, I get:
>
> chan_zap.c:8878 zt_ss7_error: [1] Received MSU in invalid state 0
>
>; ..scrolling forever madly.
>;
> Asterisk chews 100% CPU.
>
> ss7 show linkset 1 shows SS7 up, but the other side shows the link
>; going up
> and down intermittently.
>
> dmesg shows many lines of
>
> HDLC Receiver overrun on channel TE4/0/1/1 (master=TE4/0/1/1)
>
> None of this happens when I set the signaling channel to a bearer
> timeslot,
> for what it's worth.
>;
> Any ideas, please, anyone?
>
> Regards,
>
> Charl
>
>
>> -----Original Message-----
>> From: asterisk-ss7-bounceslists.digium.com">
asterisk-ss7-bounceslists.digium.com
>;> [mailto: asterisk-ss7-bounceslists.digium.com">asterisk-ss7-bounceslists.digium.com] On Behalf Of
>>; Matthew Fredrickson
>> Sent: 10 April 2007 21:23
>> To: asterisk-ss7lists.digium.com">asterisk-ss7lists.digium.com
>;> Subject: Re: [asterisk-ss7] Two libss7 questions, and, HELP!
>>
>> Make sure you compile and install in this order:
>> zaptel
>;> libss7
>;> asterisk
>>
>;> If it still occurs, execute asterisk with the -g flag, open
>> the core dump with gdb, and do a "thread apply all bt" and
>> post that to the bugtracker.
>>
>> Matthew Fredrickson
>>
>> On Apr 10, 2007, at 1:52 PM, Charl Barnard wrote:
>;>
>>> Hi All,
>>> Since the last patch has been applied to allow a second voice trunk
>>> with no signaling trunk (r78) has been committed, I've not
>> been able
>>> to get a working version of Asterisk with libss7 running
>> again, with *
>>> segfaulting when chan_zap.so gets loaded.
>>>; Is there a well-known recipe I can follow to replicate the
>> development
>>> (working) setup? Such as get zap trunk, libss7 trunk,
>;> asterisk trunk,
>;>> or whatever versions of those, that I can install, and get back
>;>> running again? I suspect some interdependency between these
>> components
>>> that I'm not able to concoct the magic brew of again to get
>> a running
>>> config? And this without the second voice trunk, yet ..
>>> Regards,
>>> Charl_______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>;>
>>> asterisk-ss7 mailing list
>;>> To UNSUBSCRIBE or update options visit:
>;>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>;
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>;> ;
http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>; http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
|____/__| /__/ __ |__| __|
|
[1-4]
|
|