Author: mattf
Date: Wed Mar 19 14:58:37 2008
New Revision: 4028
URL: http://svn.digium.com/view/zaptel?view=rev&rev=4028
Log:
Add support for new VPMADT032 fw for the TE120
Modified:
branches/1.2/wcte12xp/GpakApi.c
branches/1.2/wcte12xp/GpakApi.h
branches/1.2/wcte12xp/GpakErrs.h
branches/1.2/wcte12xp/GpakHpi.h
branches/1.2/wcte12xp/VPMADT032.bin
branches/1.2/wcte12xp/gpakenum.h
Modified: branches/1.2/wcte12xp/GpakApi.c
URL:
http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/Gpak
Api.c?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
--- branches/1.2/wcte12xp/GpakApi.c (original)
+++ branches/1.2/wcte12xp/GpakApi.c Wed Mar 19 14:58:37
2008
 -128,10
+128,10
DSP_ADDRESS IfBlockPntr; /* Interface Block pointer */
DSP_WORD DspStatus; /* DSP Status */
DSP_WORD DspChannels; /* number of DSP channels */
- //DSP_WORD DspConfs; /* number of DSP conferences
*/
- //DSP_ADDRESS PktBufrMem; /* address of Packet Buffer
*/
+ DSP_WORD DspConfs; /* number of DSP conferences
*/
+ DSP_ADDRESS PktBufrMem; /* address of Packet Buffer
*/
DSP_WORD Temp[2];
- //unsigned short int i; /* loop index / counter */
+ unsigned short int i; /* loop index / counter */
/* Read the pointer to the Interface Block. */
gpakReadDspMemory(DspId, DSP_IFBLK_ADDRESS, 2, Temp);
-560,7
+560,7
((pPortConfig->RxFrameSyncPolarity2
<< 4) & 0x0010) |
((pPortConfig->TxFrameSyncPolarity2
<< 3) & 0x0008) |
((pPortConfig->CompandingMode2
<< 1) & 0x0006) |
- (pPortConfig->SerialWordSize1 &
0x0001));
+ (pPortConfig->SerialWordSize2 &
0x0001));
MsgBuffer[12] = (DSP_WORD)
(((pPortConfig->DxDelay3 << 11)
& 0x0800) |
-672,7
+672,7
((pChanConfig->SoftwareCompand
& 3) << 2) |
(pChanConfig->EcanEnableB
<< 1) |
(pChanConfig->EcanEnableA &
1)
- );
+ );
MsgBuffer[7] = (DSP_WORD)
pChanConfig->EcanParametersA.EcanTapLength;
-732,8
+732,16
pChanConfig->EcanParametersB.EcanNumFirSegments;
MsgBuffer[34] = (DSP_WORD)
pChanConfig->EcanParametersB.EcanFirSegmentLen;
-
- MsgLength = 70; // byte number == 35*2
+ MsgBuffer[35] = (DSP_WORD)
+
pChanConfig->EcanParametersA.EcanTandemOperationEnable;
+ MsgBuffer[36] = (DSP_WORD)
+
pChanConfig->EcanParametersA.EcanMixedFourWireMode;
+ MsgBuffer[37] = (DSP_WORD)
+
pChanConfig->EcanParametersB.EcanTandemOperationEnable;
+ MsgBuffer[38] = (DSP_WORD)
+
pChanConfig->EcanParametersB.EcanMixedFourWireMode;
+
+ MsgLength = 78; // byte number == 39*2
break;
-889,7
+897,7
DSP_WORD TakeIndex; /* event fifo take index */
DSP_WORD WordsReady; /* number words ready for read
out of event fifo */
DSP_WORD EventError; /* flag indicating error with
event fifo msg */
- //DSP_WORD *pDebugData; /* debug data buffer pointer
in event data struct */
+ DSP_WORD *pDebugData; /* debug data buffer pointer in
event data struct */
/* Make sure the DSP Id is valid. */
if (DspId >= MAX_DSP_CORES)
Modified: branches/1.2/wcte12xp/GpakApi.h
URL:
http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/Gpak
Api.h?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
--- branches/1.2/wcte12xp/GpakApi.h (original)
+++ branches/1.2/wcte12xp/GpakApi.h Wed Mar 19 14:58:37
2008
-77,6
+77,9
short int EcanCrossCorrLimit; // Echo Can Cross
Correlation limit
short int EcanNumFirSegments; // Echo Can Num FIR
Segments
short int EcanFirSegmentLen; // Echo Can FIR Segment
Length
+ short int EcanTandemOperationEnable; //Enable tandem
operation
+ short int EcanMixedFourWireMode; // Handle possible
4-wire (echo-free) lines
+
} GpakEcanParms_t;
/* Definition of a Channel Configuration information
structure. */
Modified: branches/1.2/wcte12xp/GpakErrs.h
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/Gpa
kErrs.h?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
--- branches/1.2/wcte12xp/GpakErrs.h (original)
+++ branches/1.2/wcte12xp/GpakErrs.h Wed Mar 19 14:58:37
2008
-99,7
+99,8
Cc_InvalidMuteToneA = 51, /* invalid MuteToneA set,
no detector */
Cc_InvalidMuteToneB = 52, /* invalid MuteToneB
set, no detector */
- Cc_InsuffFaxCngDetResources = 53 /* insufficient
tdm block resources avail. */
+ Cc_InsuffFaxCngDetResources = 53, /* insufficient
tdm block resources avail. */
+ Cc_PortDmaNotStarted = 54, /* SerialPort not ready
*/
} GPAK_ChannelConfigStat_t;
Modified: branches/1.2/wcte12xp/GpakHpi.h
URL:
http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/Gpak
Hpi.h?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
--- branches/1.2/wcte12xp/GpakHpi.h (original)
+++ branches/1.2/wcte12xp/GpakHpi.h Wed Mar 19 14:58:37
2008
-75,6
+75,6
#define MSG_READ_DSP_MEMORY 49 /* read small
section of DSP's memory */
#define MSG_READ_DSP_MEMORY_REPLY 50 /* read memory reply
*/
-#define MSG_ACCESSGPIO 51
-#define MSG_ACCESSGPIO_REPLY 52
+#define MSG_ACCESSGPIO 51
+#define MSG_ACCESSGPIO_REPLY 52
#endif /* prevent multiple inclusion */
Modified: branches/1.2/wcte12xp/VPMADT032.bin
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/
VPMADT032.bin?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
Binary files - no diff available.
Modified: branches/1.2/wcte12xp/gpakenum.h
URL: http://svn.digium.com/view/zaptel/branches/1.2/wcte12xp/gpa
kenum.h?view=diff&rev=4028&r1=4027&r2=4028
============================================================
==================
--- branches/1.2/wcte12xp/gpakenum.h (original)
+++ branches/1.2/wcte12xp/gpakenum.h Wed Mar 19 14:58:37
2008
-114,7
+114,7
EnableMuLawSwCompanding = 6,// Enable Mu-law Software
companding
EnableALawSwCompanding = 7, // Enable Mu-law Software
companding
- BypassSwCompanding = 8, // Bypass Software
companding
+ BypassSwCompanding = 8, // Bypass Software
companding
EnableDTMFMuteA = 9, // Mute A side Dtmf digit
after tone detected
DisableDTMFMuteA = 10, // Do not mute A side Dtmf
digit once tone detected
EnableDTMFMuteB = 11, // Mute B side Dtmf digit
after tone detected
-174,7
+174,7
DtmfDigitPnd = 14, // DTMF Digit #
DtmfDigitD = 15, // DTMF Digit D
- FaxCngDigit = 90, // Fax Calling Tone (1100 Hz)
+ FaxCngDigit = 90, // Fax Calling Tone (1100 Hz)
EndofMFDigit = 100, // End of MF digit
EndofCngDigit = 101 // End of Cng Digit
-188,4
+188,5
GPIO_DIR = 2
} GpakGPIOCotrol_t;
+
#endif // end multiple inclusion
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.c
om--
zaptel-commits mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/zaptel-commits
|