RE: No RTP Data receiving

Hi,

This is a question for the sip-implementors list.

Have a look at your Call-Id in the ACK!

Regards,
  Nadine.

-----Original Message-----
From: Guenther Sohler [mailto:guenther.sohlergmx.at] 
Sent: donderdag 13 september 2007 19:39
To: sipietf.org
Subject: [Sip] No RTP Data receiving

Dear Group!

I have been programming a state machine to register and call
somebody(the test account of my sip provider)

But it does not send me RTP Data

Please find attached the log. Remarkable the proxy does send
me the SIP 200 OK repeatedly. it seems it is not happy with
my ACK Statement.

If i manually create udp packets with "nc -u" to 
192.168.10.2 it works out!

I have got an internet connection with a small server which
does nat to an internal network. in this internal network,
there is a Hardware SIP Phone, which completely works, and
my PC where i try to code this SIP Sample.

Can anybody inspect the log and tell me if there are
errors.

Thank you in advance!




--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu
sparen! 
Ideal für Modem und ISDN: http://www.gmx.n
et/de/go/smartsurfer


_______________________________________________
Sip mailing list  https://ww
w1.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use sip-implementorscs.columbia.edu for questions on current
sip
Use sippingietf.org for new developments on the application of
sip