SIP Outbound : How to identify edge-proxy ?

How are you definig edge proxy? Edge proxy is the first hop from the UA.

 

Hisham

 

On 14/02/2008, Karthikeyan Gopal , TLS-Chennai < g_karthikeyanhcl.in">g_karthikeyanhcl.in>; wrote:

Hi All,

 &nbsp; How to identify edge-proxy in this topology?

 

UA – P1 – P2 – P3 – REGISTRAR

 

Here in this case P1 and P3 are Edge proxy's as per Path header RFC 3327.

 

 

Edge proxy P1 can be identified based on VIA.

 

Then how to edge proxy identify P3?

 

Thanks & Regards,

Karthikeyan.G

 

DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------

_______________________________________________
Sip mailing list  http://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use cs.columbia.edu">sip-implementorscs.columbia.edu for questions on current sip
Use ietf.org">sippingietf.org for new developments on the application of sip