You have a maxtor one touch?
http://seagate.custhelp.com/cgi-
bin/seagate.cfg/php/enduser/std_adp.php?p_faqid=5126
sorry about the long link... paste both halves together.
--- In simplycomputers2%40yahoogroups.com">simplycomputers2
yahoogroups.com, "RB838" <rb838
...> wrote:
>
> I'm having a problem replying to responses to Vince's answers. I
> read his message and click reply to group and the message comes
back
> and says you can't use html so I had to post another message.
>
> He asked whether the computer boots up with the drive connected.
> Here's my response but I have some additional info.
>
> With the drive connected or disconnected the computer boots up
fine.
> And thanks for the info on SP3.
>
> Now every time I try to scan using my Norton program -- the blue
> screen appears and says the problem is --
> DRIVER_IRQL_NOT_LESS_OR_EQUAL with the following:
>
> STOP: 0X000000D1 (0XF79466E6, 0X00000002, 0X00000000, 0XF79466E6)
>
>
> *** mxopswd.sys - ADDRESS F79466E6 base at F7941000, DATESTAMP
> 459efd59
>
> When I follow the thread to what's being sent to Microsoft -- this
> is what is sent:
>
> C:DOCUME~1my name ~1LOCALS~1temp5a9a_appcompat.txt
>
> I ran Dell Diagnostics CD110910 and the program, when completed,
> said everything is running correctly -- no problems -- but the
> computer works for a while, then crashes. Sometimes it runs for
> hours unattended, then when I go back to use it -- the blue screen
> is up with the same message. Or -- when I try to run Norton scan --
> the scan starts and then the blue screen pops up with the message
> shown above. Should I consider getting a new hard drive for my
Dell
> 8250 or is there a fix? Thanks.
>
.