Tv service codes

SANYO

* Unplug the power cable.
* Press and hold the button on the remote control while
plugging the power cable back into the outlet.
* Keep pressing the button until the TV powers on with the
Service Menu displayed.
* Use the {CH+} buttons to select menus.
* Use the {VOL+} {VOL -} buttons to change settings.
* Some menus might have sub-addresses. Use the numeric buttons to
to adjust sub-item data.
* Press the button or turn the TV off to exit.
----------------------------------------------------------
Toshiba
# Turn the TV on.
# Press the button three times on the remote.
# Press the button again on the remote and hold.
# Then press the button on the TV's front panel.
# Release both buttons
# There should be a letter "S" on the upper right of the screen.
# Press the button on the TV's front panel again.

# You are now in Service Menu.
# Use the {CH+} or buttons to select the item.
# Use the {VOL+} and {VOL -} buttons to adjust the value.
# Turn the set off to exit the Service Menu.
----------------------------------------------------------
-
* Turn the TV on.
* Press and hold the button on the TV.
* Press and hold the button on the remote.
* The Service Menu will be displayed.

* Use the {CH+} or buttons to select the item.
* Use the {VOL+} and {VOL -} buttons to adjust the value.
* Turn the set off to exit the Service Menu
----------------------------------------------------------
Philips Magnavox

----------------------------------------------------------
----------

# Press {INFO+} on the remote.
or
# Press on the remote.
or
# Press on the remote.

# Turn the TV off to exit the Service Menu.

* Press {INFO+} on the remote.
or
* Press on the remote.
or
* Press on the remote.

* Turn the TV off to exit the Service Menu.

* Press on the remote.
or
* Press on the remote.
----------------------------------------------------------
* Turn the TV Off to exit the Service Menu

* Press on the remote.
or
* Press on the remote.

* Turn the TV off to exit the Service Menu.
--------------------------------------------------
* With the TV off:

* Press on the remote.

* Turn the TV off to exit the Service Menu.
_________________

SAMSUNG

Turn on the TV on and select the input that you want to adjust.
# Turn the display off.

# In quick sequence on the remote press:
buttons.

# The TV will turn On with the Service Menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing twice then .

----------------------------------------------------------
------

* With the TV in standby, press the
buttons on the remote.
* The TV will turn On with the Service Menu displayed.
* Press the button to exit the Service Menu.
----------------------------------------------------------
-----
* With the TV in standby, press the
{DISPLAY} {P.STD} on the remote.
* The TV will turn On with the Service Menu displayed.
* Use the {CH+} {CH -} buttons to select items.
* Use the {VOL+} {VOL -} buttons to adjust.
* Press the button to exit the Service Menu.
----------------------------------------------------------

* With the TV in standby, press the
{P.STD} buttons on the remote.
or
{P.STD} buttons on the remote.
* The TV will turn On with the Service Menu displayed.
* Use the {CH+} {CH -} buttons to select items.
* Use the {VOL+} {VOL -} buttons to adjust.
* Press the button to exit the Service Menu
----------------------------------------------------------
----
* With the TV in standby, press the
{P.STD} on the remote.
* The TV will turn On with the Service Menu displayed.
* Use the {CH+} {CH -} buttons to select items.
* Use the {VOL+} {VOL -} buttons to adjust.
* Press the button to exit the Service Menu.
----------------------------------------------------------
SONY

# Using the remote control:
# Turn the TV off.
# Press {VOL+} {POWER ON} buttons.
or
Press {POWER ON} buttons.
# The Service Menu will be displayed.
# Use numbers and to select the item to adjust.
# Use numbers and to adjust the value of the data.
# Press then to save new settings.
# The words "WRITE" in red will show up in the upper right corner if
saved.
# Turn the TV off to exit the service menu.
----------------------------------------------------------
PROJECTORS :

* Service Menu :
* Using the remote control
* Press {UP ARROW} {DOWN ARROW} .
* Then {UP ARROW} when it asks: "Do you want to enter the Service
Mode?".

* Factory Mode :
* Using the remote control
* Press {LEFT ARROW} .
* Then {UP ARROW} when it asks: "Do you want to enter the Factory
Mode?".

* Any additional menus usually pop up under the main INFORMATION menu
----------------------------------------------------------
--------------
* Access "Menu" and make sure "Status" is On.
* Exit the "Menu".

* Service Menu :
* Using the remote control
* Press {UP ARROW} {DOWN ARROW} .
* Select "Yes" when it asks: "Do you want to enter the Service
Mode?".

* Factory Mode :
* Using the remote control
* Press {LEFT ARROW} .
* Select "Yes" when it asks: "Do you want to enter the Factory
Mode?".

----------------------------------------------------------

Panasonic

PE77U / PX75U / PX77U / PZ700U / PZ750U
PD60U / PX6U / PX60U / PX600U
PD50U / PX50U / PX500U :

* Hold down the {VOL -} button ON THE PLASMA TV.
* Press the button 3 times on the remote.
* The Service Menu will be displayed.
* Use on remote to navigate main menu items.
* Use on remote to navigate sub-menu items.
* Use {VOL+} {VOL -} on remote to change item value.
* Write down all values before changing
Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service mode and save.
----------------------------------------------------------
PA25UP / PD25UP / PX25UP :

* Using the remote control:
* Press the button.
* Set "Antenna A" to "Cable".
* Select "Timer" menu and set sleep timer to 30 min.
* Press twice to exit menus.
* Tune to channel 124.
* Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" appears in on top-left corner followed by 5 letter/numbers
(which are the cumulative hours in hex numbers)

* While the "CHK" is displayed, press the and {VOL+} buttons
ON THE TV simultaneously to toggle between Modes
— Red "CHK" for Serviceman — Yellow "CHK" for Aging —

* Press the button on the remote to select one of the six
Serviceman Adjustments Modes.

A. MTS ADJUSTMENT
B. CLOCK ADJUSTMENT
C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT
G. OTHER ADJUSTMENT

* Press {CH+} {CH -} on the remote to select the settings
on each of Service Adjustment Modes.

Write down the original values before modifying anything.
It's easy to erroneously adjust the wrong item.

* Press {VOL+} {VOL -} on the remote to change values.
* Press the button on the TV to exit the service menu.
----------------------------------------------------------
---------
PA20UP / PX20UP :

* Using the remote control:
* Press the button.
* Press "Setup" menu.
* On "Mode" menu, select "Cable"
* Select "Timer" menu and set sleep timer to 30 min.
* Press twice to exit menus.
* Tune to channel 124.
* Press and hold {VOL -} button ON THE PLASMA TV.

"CHK" appears in on top-left corner followed by 5 letter/numbers
(which are the cumulative hours in hex numbers)

* While the "CHK" is displayed, press the and {VOL+} buttons
ON THE TV simultaneously to toggle between Modes:

— Red "CHK" for Serviceman — Yellow "CHK" for Aging —

* Press the button on the remote to select one of the six
Serviceman Adjustments Modes.

A. MTS ADJUSTMENT
B. CLOCK ADJUSTMENT
C. VIDEO ADJUSTMENT
D. HDEF ADJUSTMENT
E. VDEF ADJUSTMENT
F. DAF ADJUSTMENT
G. OTHER ADJUSTMENT

* Press {CH+} {CH -} on the remote to select the settings
on each of Service Adjustment Modes.

Write down the original values before modifying anything.
It's easy to erroneously adjust the wrong item.

* Press {VOL+} {VOL -} on the remote to change values.
* Press the button on the TV to exit the service menu
----------------------------------------------------------
-------
LCDs / CRTs / RPTVs :

* Hold down the {VOL -} button ON THE TV.
* Press the button 3 times on the remote.
* The Service Menu will be displayed.
* Use on remote to navigate main menu items.
* Use on remote to navigate sub-menu items.
* Use {VOL+} {VOL -} on remote to change item value.
* Write down all values before changing
Once a value is changed, THE CHANGE IS MADE.
* Power off to exit service mode and save.
----------------------------------------------------------
PROJECTORS:

# Turn the Projector on.
# Press the button.
# A "Power Off" confirmation will come up on screen.
# Then press
& buttons.

# The Service Menu will be displayed.
# To exit, turn the Projector Off.
----------------------------------------------------------
---
PLASMAS 8UK / 9UK:

* Hold down the {VOL -} button ON THE PLASMA DISPLAY.
* Press the button 3 times on the remote.
(Status button is the one above Setup button)
* The Service Menu (CAT) will be displayed.
(CAT = Computer Aided Test Menu)
* Use the cursors keys on the remote to select a mode.
* And press the Action key {} to access the menu.
* To exit each mode, press the button.
* To exit the CAT menu, press the button.
* Press button on the Plasma to exit the service mode.
----------------------------------------------------------
---------
PLASMAS 3UY / 4UY / 5UY / 6UY / 7UY:

* Hold down the {VOL -} button ON THE PLASMA DISPLAY.
* Press the button 3 times on the remote.
(Status button is the one below Power button)
* The Service Menu (CAT) will be displayed.
(CAT = Computer Aided Test Menu)
* Use the cursors keys on the remote to select a mode.
* And press the Action key {} to access the menu.
* To exit each mode, press the button.
* To exit the CAT menu, press the button.
* Press button on the Plasma to exit the service mode.
----Pioneer
PDP-4214

* Press the button on the remote.
* The input list will come up.
* Then press the buttons on the remote.
* To exit, press the button on the remote.

You can also press the back button when you are
in each category to get back to the main menu
----------------------------------------------------------
4th / 5th / 6th / 7th GENERATION MODELS

* Make sure the Plasma and the Media Box are in standby.
* Using the remote control:
* Press button (just press, do not hold) and wait 3
seconds.
* Press buttons.
* The Plasma will turn on with the "Information" page displayed.
* Press to move through the levels of menus:

INFORMATION
FUNCTION CHECK
COMMON ADJ
OPTION
INITIALIZE

* Press the button to move through individual menus.
* To exit, power it down.
----------------------------------------------------------
----------------------------------------------------------

Messages in this topic (1) Reply (via web post) | Start a new topic

.