Hello Friend,
; First of all you will need Enable password for that.
; After you give enable plz follow the following Procedure
If your Bri Port is in Backup of Serial Port then first remove it from backup using commnad " no backup interface bri0/0 "
In case of your if Bri0 is there you can put it there.
then on # prompt give following commannd:
Router# isdn test call int bri0/0 <PRI Number to Which you are calling>;
This is the command For ISDN test call.
If you want to
check call
is made or not
You can use
Router# show isdn Active
And to see ISDN status Command is :
Router# show isdn status
If you find any problem, Plz revert Back
Swapnil M Prajapati.
POP CE,
HCL Infinet Ltd
Baroda
.
Goverdhan Reddy <kgr_82
yahoo.com> wrote: Hai .... Dear Friends,
How can we gave a ISDN
test calll what is the process to gave a test call in cisco routers (compatability), what are the commands we have to apply.
Very Very thanks in advance to Dear All Members..........
Sincerely,
Goverdhan Reddy.....
Here’s a new way to find what you're looking for - Yahoo! Answers
.
