|
List Info
Thread: Re: new testing version - pxafb automatically loaded at boot time
|
|
| Re: new testing version - pxafb
automatically loaded at boot time |
|
2007-01-23 16:20:17 |
|
Le mardi 23 janvier 2007 à 22:34 +0100, Patrick Steiner a écrit :
> On Tuesday, 23. January 2007 20:11, you wrote:
> > Hi Patrick,
> > With the package i made yesterday, "pxafb" module was NOT automatically
> > loaded at boot time.
> > So, login via USB or serial cable was mandatory in order to manually
> > "modprobe" frame buffer...
> >
> > Here is an updated version :
> > http://jn.graux.free.fr/x51v-linux/x51v-linux.tar.gz
> Thanks, i forgot my cradle in work :-( so i cant test it right now. but i´ll
> do it tomorrow.
>
> do you know if the patches will be added to standard hh kernel?
>
Yes Pierre just made a new folder in arch/arm/mach-pxa dedicated to
X50/x51 machines and he should commit his modification soon.
> or could you say me which you used und what hh kernel, so i could also add
> this do OE.
>
1)just checkout the latest head of linux kernel handheld :
http://handhelds.org/moin/moin.cgi/x50vHowTo
2)apply the latest patches made by Pierre :
http://jn.graux.free.fr/kernel_patches/
3)make your kernel
Bye.
> >
> > I also did some modification in initrd.gz to speed up the boot.
> > Be careful, using NFS for root file system is no longer possible with
> > this release.
> >
> > Patrick Steiner a1.net> writes:
> > > I have successfully build (not testet) a angstrom
> > > (http://www.angstrom-distribution.org/) axim image via openembedded.
> > >
> > > now i´ll try to include all the patches to the hh kernel. if this
> >
> > works.
> >
> > > i´ll try to add the axim x51v to OE.
> > >
> > > meanwhile i have bootet my axim with linux from
> > > http://jn.graux.free.fr/x51v-linux/ (version from yesterday).
> > >
> > > i get the usb-device on host, but i always get the following error:
> > >
> > > usb 2-2: new full speed USB device using uhci_hcd and address 16
> > > usb 2-2: configuration #1 chosen from 1 choice
> > > usb0: register 'cdc_subset' at usb-0000:00:1d.1-2, Linux Device,
> > > e2:d8:ec:8a:bd:48
> > > NETDEV WATCHDOG: usb0: transmit timed out
> > > usb0: no IPv6 routers present
> > > NETDEV WATCHDOG: usb0: transmit timed out
> > > NETDEV WATCHDOG: usb0: transmit timed out
> > > NETDEV WATCHDOG: usb0: transmit timed out
> >
> > If you got this, this probably means that Haret failed to load Linux...
> >
> > > and is also doesnt see anything on my axim. if i activate the mirror
> > > mode i see a big-fat black-bar on my screen after a few seconds.
> >
> > Yep ... This means that Haret failed to load linux...
> >
> > > without mirror mode i see the 4 colored lines. this should be right
> >
> > or?
> >
> >
> > Without mirror mode enabled, you MUST see five horizontal colored lines
> > (blue, red, light blue, yellow, black). If so, this means that Linux was
> > successfully loaded.
> >
> > > btw. i have got a german axim x51v with the latest german rom on it.
> > >
> > > patrick
> >
> > Before booting Linux, make sure that :
> > - ONLY Haret is running (close all other applications)
> > - rootfs image must be in the root of your SD card.
> >
> > To log-on using telnet over USB, wait for one minute after boot and
> > unplug / plug Axim from cradle. Then, do "lsusb" to check that usb
> > device has been detected by your HOST.
> >
> > Finally, "telnet 10.0.0.2" and login using "root" as
> > login and "x50v-linux" as password...
> >
> > Do not hesitate to try several telnet .....
> >
> > Bye
>
> bye
>
--
_______________________________________________
Aximx50-port mailing list
Aximx50-port handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
|
| Re: Re: new testing version - pxafb
automatically loaded at boot time |
|
2007-01-23 17:04:40 |
|
| Works perfectly on mine. Now to tackle the touchscreen? Opie isn't
much good without an interface :-p
On Jan 23, 2007, at 2:20 PM, Jean-Nicolas GRAUx wrote:
> Le mardi 23 janvier 2007 à 22:34 +0100, Patrick Steiner a écrit :
>> On Tuesday, 23. January 2007 20:11, you wrote:
>>> Hi Patrick,
>>> With the package i made yesterday, "pxafb" module was NOT
>>> automatically
>>> loaded at boot time.
>>> So, login via USB or serial cable was mandatory in order to manually
>>> "modprobe" frame buffer...
>>>
>>> Here is an updated version :
>>> http://jn.graux.free.fr/x51v-linux/x51v-linux.tar.gz
>> Thanks, i forgot my cradle in work :-( so i cant test it right now.
>> but i´ll
>> do it tomorrow.
>>
>> do you know if the patches will be added to standard hh kernel?
>>
>
> Yes Pierre just made a new folder in arch/arm/mach-pxa dedicated to
> X50/x51 machines and he should commit his modification soon.
>
>> or could you say me which you used und what hh kernel, so i could
>> also add
>> this do OE.
>>
>
> 1)just checkout the latest head of linux kernel handheld :
> http://handhelds.org/moin/moin.cgi/x50vHowTo
>
> 2)apply the latest patches made by Pierre :
> http://jn.graux.free.fr/kernel_patches/
>
> 3)make your kernel
>
> Bye.
>>>
>>> I also did some modification in initrd.gz to speed up the boot.
>>> Be careful, using NFS for root file system is no longer possible
>>> with
>>> this release.
>>>
>>> Patrick Steiner a1.net> writes:
>>>> I have successfully build (not testet) a angstrom
>>>> (http://www.angstrom-distribution.org/) axim image via
>>>> openembedded.
>>>>
>>>> now i´ll try to include all the patches to the hh kernel. if this
>>>
>>> works.
>>>
>>>> i´ll try to add the axim x51v to OE.
>>>>
>>>> meanwhile i have bootet my axim with linux from
>>>> http://jn.graux.free.fr/x51v-linux/ (version from yesterday).
>>>>
>>>> i get the usb-device on host, but i always get the following error:
>>>>
>>>> usb 2-2: new full speed USB device using uhci_hcd and address 16
>>>> usb 2-2: configuration #1 chosen from 1 choice
>>>> usb0: register 'cdc_subset' at usb-0000:00:1d.1-2, Linux Device,
>>>> e2:d8:ec:8a:bd:48
>>>> NETDEV WATCHDOG: usb0: transmit timed out
>>>> usb0: no IPv6 routers present
>>>> NETDEV WATCHDOG: usb0: transmit timed out
>>>> NETDEV WATCHDOG: usb0: transmit timed out
>>>> NETDEV WATCHDOG: usb0: transmit timed out
>>>
>>> If you got this, this probably means that Haret failed to load
>>> Linux...
>>>
>>>> and is also doesnt see anything on my axim. if i activate the
>>>> mirror
>>>> mode i see a big-fat black-bar on my screen after a few seconds.
>>>
>>> Yep ... This means that Haret failed to load linux...
>>>
>>>> without mirror mode i see the 4 colored lines. this should be right
>>>
>>> or?
>>>
>>>
>>> Without mirror mode enabled, you MUST see five horizontal colored
>>> lines
>>> (blue, red, light blue, yellow, black). If so, this means that
>>> Linux was
>>> successfully loaded.
>>>
>>>> btw. i have got a german axim x51v with the latest german rom on
>>>> it.
>>>>
>>>> patrick
>>>
>>> Before booting Linux, make sure that :
>>> - ONLY Haret is running (close all other applications)
>>> - rootfs image must be in the root of your SD card.
>>>
>>> To log-on using telnet over USB, wait for one minute after boot and
>>> unplug / plug Axim from cradle. Then, do "lsusb" to check that usb
>>> device has been detected by your HOST.
>>>
>>> Finally, "telnet 10.0.0.2" and login using "root" as
>>> login and "x50v-linux" as password...
>>>
>>> Do not hesitate to try several telnet .....
>>>
>>> Bye
>>
>> bye
>>
>
> --
> _______________________________________________
> Aximx50-port mailing list
> Aximx50-porthandhelds.org
> https://www.handhelds.org/mailman/listinfo/aximx50-port
--
_______________________________________________
Aximx50-port mailing list
Aximx50-porthandhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
|
[1-2]
|
|