White screen on boot with X51v - problems with SD card ?

Dear All,

I still have the problem of a "fade to White screen
with black bar" on boot 
problem, and as previously posted I have never managed to
get the USB 
networking working.

However, I have managed to build a working serial port
adaptor, and can get 
the kernel output, and a shell 

Quote:
*******************************************
Comport init COM1:115200,8NUncompressing
Linux.........................
Linux version 2.6.19-hh8 (jngjng-laptop) (gcc version
3.4.1) #1 PREEMPT Mon 
Ja7
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE),
cr=0000397f
*********************************************
***big Snip for sanity
*********************************************
Kernel command line: root=/dev/ram0 rw ramdisk_size=12288
mem=64M keepinitrd 
in8
*********************************************
***Huge Snip to keep this list small!
*********************************************
Setting pxa register LCCR1_BLW to 19...
Setting pxa register LCCR3_PCD to 4...
Mounting /proc...
mmcblk0: mmc0:0002       1955328KiB
 mmcblk0: p1 < p5 >
Trying to mount the fat32 SD card... FAT: bogus number of
reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0p1.
mount: Mounting /dev/mmc/blk0/part1 on /mnt/sdcard failed:
Invalid argument
failed!
Dropping to a shell and enabling the telnet daemon
/bin/sh: can't access tty; job control turned off

***and here I see that vary little is mounted...

/ #busybox df -h
Filesystem                Size      Used Available Use%
Mounted on
/dev/root                 7.0M      5.0M      1.7M  75% /
/ #

Would I be correct in thinking that the problem is my SD
card ? 
It seems to work fine under Windows Mobile 2005...

All ideas welcome 

Jake
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-porthandhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port

Jake Grimmett wrote:
> Dear All,
>
> I still have the problem of a "fade to White
screen with black bar" on boot 
> problem, and as previously posted I have never managed
to get the USB 
> networking working.
>
> However, I have managed to build a working serial port
adaptor, and can get 
> the kernel output, and a shell 
>
> Quote:
> *******************************************
> Comport init COM1:115200,8NUncompressing
Linux.........................
> Linux version 2.6.19-hh8 (jngjng-laptop) (gcc version
3.4.1) #1 PREEMPT Mon 
> Ja7
> CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE),
cr=0000397f
> *********************************************
> ***big Snip for sanity
> *********************************************
> Kernel command line: root=/dev/ram0 rw
ramdisk_size=12288 mem=64M keepinitrd 
> in8
> *********************************************
> ***Huge Snip to keep this list small!
> *********************************************
> Setting pxa register LCCR1_BLW to 19...
> Setting pxa register LCCR3_PCD to 4...
> Mounting /proc...
> mmcblk0: mmc0:0002       1955328KiB
>  mmcblk0: p1 < p5 >
> Trying to mount the fat32 SD card... FAT: bogus number
of reserved sectors
> VFS: Can't find a valid FAT filesystem on dev
mmcblk0p1.
> mount: Mounting /dev/mmc/blk0/part1 on /mnt/sdcard
failed: Invalid argument
> failed!
> Dropping to a shell and enabling the telnet daemon
> /bin/sh: can't access tty; job control turned off
>
> ***and here I see that vary little is mounted...
>
> / #busybox df -h
> Filesystem                Size      Used Available Use%
Mounted on
> /dev/root                 7.0M      5.0M      1.7M  75%
/
> / #
>
> Would I be correct in thinking that the problem is my
SD card ? 
> It seems to work fine under Windows Mobile 2005...
>
> All ideas welcome 
Could you post your model, size, vendor.. of your SD Card
>
> Jake

-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-porthandhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port