Re: Touchscreen chip is not an ADS 7846

Hello Pierre,

Tuesday, January 30, 2007, 12:06:54 AM, you wrote:

> Paul Sokolovsky a ecrit :
>> Hello Pierre,
>>
>> Monday, January 29, 2007, 9:26:04 PM, you wrote:
>>
>> []
>>   
>>>>   Yes, I refactored it exactly for your
use, and I'd appreciate if you
>>>> give it try (and win  ).
Please see h4000 code fro how to use it
>>>> (pretty simple actually, you just need to
pass in pen down IRQ).
>>>>
>>>>   I also confirmed that ADS7846 and TSC2046
are exact clones. Quoting
>>>> doc:
>>>> "The TSC2046 is 100% pin-compatible
with the existing
>>>> ADS7846, and will drop into the same
socket."
>>>> They talk about pin compatibility here, but
looking at command bits,
>>>> programmatical interface is the same too.
So, this is great news,
>>>> meaning that the whole dozen of PDAs can
use the same driver. I will
>>>> try ads7846ts_ssp on hx4700 as the next
thing to do too.
>>>>   
>>>>       
>>> ok : go for it, then 
>>> Just a question : do you have any idea of the
transfer laws to be used ?
>>> I get some really non-linear measurements...
>>>     
> Something goes wrong with the device-independent 7846
driver.
> It seems that the SPI communication is faulty. As long
as the stylus is
> down, it prints :

> ads7846_ssp_putget: warning: timeout while waiting for
SSSR_RNE_MSK
> ads7846_ssp_putget: warning: timeout while waiting for
SSSR_TNF_MSK
> ads7846_ssp_putget: warning: timeout while waiting for
SSSR_RNE_MSK
> ads7846_ssp_putget: warning: timeout while waiting for
SSSR_TNF_MSK

> I do not understand why...
> Attached is the touchscreen module I hacked, if it can
help.

  Well, I actually also reviewed the ads7846ts_ssp vs
hx4700_ts code,
preparing to use the first in place of second, and
discovered few
things and fixed few issues. First of all, PXA25x and PXA27x
appear to
have differences in SSP ports. PXA27x has few more features
and
different base SSP frequency. But even with that,
ads7846_ssp should
still work on PXA27x (the frequency it uses is still lower
than used
on hx4700_ts and offshots). Of course, as long as SSP1 port
is used,
and that appears to be your case. At the same time, I fixes
some race
condition in ads7846_ssp. So, please try it now, and if it
still won't
work, then oops, I'll need to make it run on hx4700 first
then.

> Pierre





-- 
Best regards,
 Paul                            mailto:pmiscmlgmail.com

-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-porthandhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port